reset_device(info);
if (!tty || tty->termios.c_cflag & HUPCL) {
- info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+ info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
set_signals(info);
}
cflag = tty->termios.c_cflag;
- /* if B0 rate (hangup) specified then negate DTR and RTS */
- /* otherwise assert DTR and RTS */
+ /* if B0 rate (hangup) specified then negate RTS and DTR */
+ /* otherwise assert RTS and DTR */
if (cflag & CBAUD)
- info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
else
- info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
/* byte size and parity */
/* Handle transition to B0 status */
if (old_termios->c_cflag & CBAUD &&
!(tty->termios.c_cflag & CBAUD)) {
- info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
spin_lock_irqsave(&info->lock,flags);
set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
spin_lock_irqsave(&info->lock,flags);
if (onoff)
- info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
else
- info->serial_signals &= ~SerialSignal_RTS + SerialSignal_DTR;
+ info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
}
{
unsigned char status = 0;
- /* preserve DTR and RTS */
- info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
+ /* preserve RTS and DTR */
+ info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
if (read_reg(info, CHB + VSTR) & BIT7)
info->serial_signals |= SerialSignal_DCD;
info->serial_signals |= SerialSignal_DSR;
}
-/* Set the state of DTR and RTS based on contents of
+/* Set the state of RTS and DTR based on contents of
* serial_signals member of device extension.
*/
static void set_signals(MGSLPC_INFO *info)
spin_unlock_irqrestore(&info->netlock, flags);
return rc;
}
- /* assert DTR and RTS, apply hardware settings */
- info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ /* assert RTS and DTR, apply hardware settings */
+ info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
mgslpc_program_hw(info, tty);
tty_kref_put(tty);
usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12));
if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
- info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+ info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
usc_set_serial_signals(info);
}
cflag = info->port.tty->termios.c_cflag;
- /* if B0 rate (hangup) specified then negate DTR and RTS */
- /* otherwise assert DTR and RTS */
+ /* if B0 rate (hangup) specified then negate RTS and DTR */
+ /* otherwise assert RTS and DTR */
if (cflag & CBAUD)
- info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
else
- info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
/* byte size and parity */
/* Handle transition to B0 status */
if (old_termios->c_cflag & CBAUD &&
!(tty->termios.c_cflag & CBAUD)) {
- info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
spin_lock_irqsave(&info->irq_spinlock,flags);
usc_set_serial_signals(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
spin_lock_irqsave(&info->irq_spinlock,flags);
if (on)
- info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
else
- info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
usc_set_serial_signals(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
}
{
u16 status;
- /* clear all serial signals except DTR and RTS */
- info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
+ /* clear all serial signals except RTS and DTR */
+ info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
/* Read the Misc Interrupt status Register (MISR) to get */
/* the V24 status signals. */
/* usc_set_serial_signals()
*
- * Set the state of DTR and RTS based on contents of
+ * Set the state of RTS and DTR based on contents of
* serial_signals member of device extension.
*
* Arguments: info pointer to device instance data
return rc;
}
- /* assert DTR and RTS, apply hardware settings */
- info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ /* assert RTS and DTR, apply hardware settings */
+ info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
mgsl_program_hw(info);
/* enable network layer transmit */
/* Handle transition to B0 status */
if (old_termios->c_cflag & CBAUD &&
!(tty->termios.c_cflag & CBAUD)) {
- info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
spin_lock_irqsave(&info->lock,flags);
set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
return rc;
}
- /* assert DTR and RTS, apply hardware settings */
- info->signals |= SerialSignal_RTS + SerialSignal_DTR;
+ /* assert RTS and DTR, apply hardware settings */
+ info->signals |= SerialSignal_RTS | SerialSignal_DTR;
program_hw(info);
/* enable network layer transmit */
slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
- info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+ info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
set_signals(info);
}
cflag = info->port.tty->termios.c_cflag;
- /* if B0 rate (hangup) specified then negate DTR and RTS */
- /* otherwise assert DTR and RTS */
+ /* if B0 rate (hangup) specified then negate RTS and DTR */
+ /* otherwise assert RTS and DTR */
if (cflag & CBAUD)
- info->signals |= SerialSignal_RTS + SerialSignal_DTR;
+ info->signals |= SerialSignal_RTS | SerialSignal_DTR;
else
- info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
/* byte size and parity */
spin_lock_irqsave(&info->lock,flags);
if (on)
- info->signals |= SerialSignal_RTS + SerialSignal_DTR;
+ info->signals |= SerialSignal_RTS | SerialSignal_DTR;
else
- info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
}
tx_stop(info);
rx_stop(info);
- info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+ info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
set_signals(info);
slgt_irq_off(info, IRQ_ALL | IRQ_MASTER);
{
unsigned short status = rd_reg16(info, SSR);
- /* clear all serial signals except DTR and RTS */
- info->signals &= SerialSignal_DTR + SerialSignal_RTS;
+ /* clear all serial signals except RTS and DTR */
+ info->signals &= SerialSignal_RTS | SerialSignal_DTR;
if (status & BIT3)
info->signals |= SerialSignal_DSR;
/* Handle transition to B0 status */
if (old_termios->c_cflag & CBAUD &&
!(tty->termios.c_cflag & CBAUD)) {
- info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
spin_lock_irqsave(&info->lock,flags);
set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
return rc;
}
- /* assert DTR and RTS, apply hardware settings */
- info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ /* assert RTS and DTR, apply hardware settings */
+ info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
program_hw(info);
/* enable network layer transmit */
reset_port(info);
if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
- info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+ info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
set_signals(info);
}
cflag = info->port.tty->termios.c_cflag;
- /* if B0 rate (hangup) specified then negate DTR and RTS */
- /* otherwise assert DTR and RTS */
+ /* if B0 rate (hangup) specified then negate RTS and DTR */
+ /* otherwise assert RTS and DTR */
if (cflag & CBAUD)
- info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
else
- info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
/* byte size and parity */
get_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
- result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
- ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
- ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
- ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
- ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
- ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
+ result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS : 0) |
+ ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR : 0) |
+ ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR : 0) |
+ ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG : 0) |
+ ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR : 0) |
+ ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS : 0);
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):%s tiocmget() value=%08X\n",
spin_lock_irqsave(&info->lock,flags);
if (on)
- info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
+ info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
else
- info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
+ info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
set_signals(info);
spin_unlock_irqrestore(&info->lock,flags);
}
tx_stop(info);
rx_stop(info);
- info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
+ info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
set_signals(info);
/* disable all port interrupts */
u16 gpstatus = read_status_reg(info);
u16 testbit;
- /* clear all serial signals except DTR and RTS */
- info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
+ /* clear all serial signals except RTS and DTR */
+ info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
/* set serial signal bits to reflect MISR */
info->serial_signals |= SerialSignal_DSR;
}
-/* Set the state of DTR and RTS based on contents of
+/* Set the state of RTS and DTR based on contents of
* serial_signals member of device context.
*/
static void set_signals(SLMP_INFO *info)