media: stm32-dcmi: rework overrun/error case

Do not stop/restart dma on overrun or errors.
Dma will be restarted on current frame transfer
completion. Frame transfer completion is ensured
even if overrun or error occurs by DCMI continuous
capture mode which restarts data transfer at next
frame sync.
Do no warn on overrun while in irq thread, this slows down
system and lead to more overrun errors. Use a counter
instead and log errors at stop streaming.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 37d82d3e33f9b1148ee0a930c8d6442a2fccb388..95ace0ffa687e3b1344156037cc16adf21410a5b 100644 (file)
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -160,6 +160,7 @@ struct stm32_dcmi {
        dma_cookie_t                    dma_cookie;
        u32                             misr;
        int                             errors_count;
+       int                             overrun_count;
        int                             buffers_count;
 };
 
@@ -373,23 +374,9 @@ static irqreturn_t dcmi_irq_thread(int irq, void *arg)
        }
 
        if ((dcmi->misr & IT_OVR) || (dcmi->misr & IT_ERR)) {
-               /*
-                * An overflow or an error has been detected,
-                * stop current DMA transfert & restart it
-                */
-               dev_warn(dcmi->dev, "%s: Overflow or error detected\n",
-                        __func__);
-
                dcmi->errors_count++;
-               dev_dbg(dcmi->dev, "Restarting capture after DCMI error\n");
-
-               spin_unlock_irq(&dcmi->irqlock);
-               dmaengine_terminate_all(dcmi->dma_chan);
-
-               if (dcmi_start_capture(dcmi))
-                       dev_err(dcmi->dev, "%s: Cannot restart capture on overflow or error\n",
-                               __func__);
-               return IRQ_HANDLED;
+               if (dcmi->misr & IT_OVR)
+                       dcmi->overrun_count++;
        }
 
        spin_unlock_irq(&dcmi->irqlock);
@@ -572,6 +559,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 
        dcmi->sequence = 0;
        dcmi->errors_count = 0;
+       dcmi->overrun_count = 0;
        dcmi->buffers_count = 0;
        dcmi->active = NULL;
 
@@ -682,8 +670,13 @@ static void dcmi_stop_streaming(struct vb2_queue *vq)
 
        clk_disable(dcmi->mclk);
 
-       dev_dbg(dcmi->dev, "Stop streaming, errors=%d buffers=%d\n",
-               dcmi->errors_count, dcmi->buffers_count);
+       if (dcmi->errors_count)
+               dev_warn(dcmi->dev, "Some errors found while streaming: errors=%d (overrun=%d), buffers=%d\n",
+                        dcmi->errors_count, dcmi->overrun_count,
+                        dcmi->buffers_count);
+       dev_dbg(dcmi->dev, "Stop streaming, errors=%d (overrun=%d), buffers=%d\n",
+               dcmi->errors_count, dcmi->overrun_count,
+               dcmi->buffers_count);
 }
 
 static const struct vb2_ops dcmi_video_qops = {