ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 104

This commit adds the required pin muxing for the network interfaces and
the MDIO interface to be properly initialized. For instance, this makes
it possible for a bootloader to initialize and access the network interfaces

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1407759281-11513-6-git-send-email-ezequiel.garcia@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index c5fe8b5dcdc7dab6250597efb80b7b2b0c8ea321..f56bb1bfe8d7c369294f767d367c4d1ba0af7472 100644 (file)
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -86,6 +86,8 @@
                        };
 
                        mdio {
+                               pinctrl-0 = <&mdio_pins>;
+                               pinctrl-names = "default";
                                phy0: ethernet-phy@0 { /* Marvell 88E1318 */
                                        reg = <0>;
                                };
@@ -96,12 +98,16 @@
                        };
 
                        ethernet@70000 {
+                               pinctrl-0 = <&ge0_rgmii_pins>;
+                               pinctrl-names = "default";
                                status = "okay";
                                phy = <&phy0>;
                                phy-mode = "rgmii-id";
                        };
 
                        ethernet@74000 {
+                               pinctrl-0 = <&ge1_rgmii_pins>;
+                               pinctrl-names = "default";
                                status = "okay";
                                phy = <&phy1>;
                                phy-mode = "rgmii-id";