MXC: mach-mx31_3ds: Add support for on board NAND Flash.

Since the using of Bad Block Table is not constantly a good behave
I had made it configurable.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 3872af1cf2c322a7ac9494b31e6fbd06513bf68d..9a2911e004a37ff5e47a7f03675aab0a36629593 100644 (file)
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -62,6 +62,15 @@ config MACH_MX31_3DS
          Include support for MX31PDK (3DS) platform. This includes specific
          configurations for the board and its peripherals.
 
+config MACH_MX31_3DS_MXC_NAND_USE_BBT
+       bool "Make the MXC NAND driver use the in flash Bad Block Table"
+       depends on MACH_MX31_3DS
+       depends on MTD_NAND_MXC
+       help
+         Enable this if you want that the MXC NAND driver uses the in flash
+         Bad Block Table to know what blocks are bad instead of scanning the
+         entire flash looking for bad block markers.
+
 config MACH_MX31MOBOARD
        bool "Support mx31moboard platforms (EPFL Mobots group)"
        select ARCH_MX31

diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 4a94c3c4948085884f7a0a0ece407eec74804e4a..bf1f54a31c4fabd887503b37a76a565716e6cb8a 100644 (file)
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -34,6 +34,7 @@
 #include <mach/board-mx31_3ds.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/mxc_nand.h>
 #include "devices.h"
 
 /*!
@@ -53,6 +54,17 @@ static int mx31_3ds_pins[] = {
        IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
 };
 
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
+       .width          = 1,
+       .hw_ecc         = 1,
+#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
+       .flash_bbt      = 1,
+#endif
+};
+
 static struct imxuart_platform_data uart_pdata = {
        .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -236,6 +248,7 @@ static void __init mxc_board_init(void)
                                      "mx31_3ds");
 
        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+       mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata);
 
        if (!mx31_3ds_init_expio())
                platform_device_register(&smsc911x_device);