atl1: use kernel provided ethernet length constants

Use constants already provided by the kernel for ethernet related lengths.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/atl1/atl1_hw.h b/drivers/net/atl1/atl1_hw.h
index f0d7e82251d227bdb17f884e354e2774134bf1c0..939aa0f53f6e2b243d486436f084317f39fcc14b 100644 (file)
--- a/drivers/net/atl1/atl1_hw.h
+++ b/drivers/net/atl1/atl1_hw.h
@@ -680,11 +680,6 @@ void atl1_check_options(struct atl1_adapter *adapter);
 #define AUTONEG_ADVERTISE_10_100_ALL   0x000F  /* All 10/100 speeds */
 #define AUTONEG_ADVERTISE_10_ALL       0x0003  /* 10Mbps Full & Half speeds */
 
-/* The size (in bytes) of a ethernet packet */
-#define ENET_HEADER_SIZE               14
-#define MAXIMUM_ETHERNET_FRAME_SIZE    1518    /* with FCS */
-#define MINIMUM_ETHERNET_FRAME_SIZE    64      /* with FCS */
-#define ETHERNET_FCS_SIZE              4
 #define MAX_JUMBO_FRAME_SIZE           0x2800
 
 #define PHY_AUTO_NEG_TIME      45      /* 4.5 Seconds */

diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
index 6aa2dc32727ec6c53cddc682b48e23bbb4304f33..993ed2a2d282f3b0b74f13815553d902d7397f97 100644 (file)
--- a/drivers/net/atl1/atl1_main.c
+++ b/drivers/net/atl1/atl1_main.c
@@ -59,6 +59,7 @@
 #include <linux/skbuff.h>
 #include <linux/etherdevice.h>
 #include <linux/if_vlan.h>
+#include <linux/if_ether.h>
 #include <linux/irqreturn.h>
 #include <linux/workqueue.h>
 #include <linux/timer.h>
@@ -120,8 +121,8 @@ static int __devinit atl1_sw_init(struct atl1_adapter *adapter)
        struct atl1_hw *hw = &adapter->hw;
        struct net_device *netdev = adapter->netdev;
 
-       hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
-       hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
+       hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+       hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
 
        adapter->wol = 0;
        adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7;
@@ -688,9 +689,9 @@ static int atl1_change_mtu(struct net_device *netdev, int new_mtu)
 {
        struct atl1_adapter *adapter = netdev_priv(netdev);
        int old_mtu = netdev->mtu;
-       int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+       int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
 
-       if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
+       if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
            (max_frame > MAX_JUMBO_FRAME_SIZE)) {
                dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
                return -EINVAL;
@@ -1337,7 +1338,7 @@ rrd_ok:
                skb = buffer_info->skb;
                length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size);
 
-               skb_put(skb, length - ETHERNET_FCS_SIZE);
+               skb_put(skb, length - ETH_FCS_LEN);
 
                /* Receive Checksum Offload */
                atl1_rx_checksum(adapter, rrd, skb);
@@ -1456,7 +1457,7 @@ static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb,
                        tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
                                iph->daddr, 0, IPPROTO_TCP, 0);
                        ipofst = skb_network_offset(skb);
-                       if (ipofst != ENET_HEADER_SIZE) /* 802.3 frame */
+                       if (ipofst != ETH_HLEN) /* 802.3 frame */
                                tso->tsopl |= 1 << TSO_PARAM_ETHTYPE_SHIFT;
 
                        tso->tsopl |= (iph->ihl &