----------------------------
+What: V4L2 selections API target rectangle and flags unification, the
+ following definitions will be removed: V4L2_SEL_TGT_CROP_ACTIVE,
+ V4L2_SEL_TGT_COMPOSE_ACTIVE, V4L2_SUBDEV_SEL_*, V4L2_SUBDEV_SEL_FLAG_*
+ in favor of common V4L2_SEL_TGT_* and V4L2_SEL_FLAG_* definitions.
+ For more details see include/linux/v4l2-common.h.
+When: 3.8
+Why: The regular V4L2 selections and the subdev selection API originally
+ defined distinct names for the target rectangles and flags - V4L2_SEL_*
+ and V4L2_SUBDEV_SEL_*. Although, it turned out that the meaning of these
+ target rectangles is virtually identical and the APIs were consolidated
+ to use single set of names - V4L2_SEL_*. This didn't involve any ABI
+ changes. Alias definitions were created for the original ones to avoid
+ any instabilities in the user space interface. After few cycles these
+ backward compatibility definitions will be removed.
+Who: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
+
+----------------------------
+
+What: Using V4L2_CAP_VIDEO_CAPTURE and V4L2_CAP_VIDEO_OUTPUT flags
+ to indicate a V4L2 memory-to-memory device capability
+When: 3.8
+Why: New drivers should use new V4L2_CAP_VIDEO_M2M capability flag
+ to indicate a V4L2 video memory-to-memory (M2M) device and
+ applications can now identify a M2M video device by checking
+ for V4L2_CAP_VIDEO_M2M, with VIDIOC_QUERYCAP ioctl. Using ORed
+ V4L2_CAP_VIDEO_CAPTURE and V4L2_CAP_VIDEO_OUTPUT flags for M2M
+ devices is ambiguous and may lead, for example, to identifying
+ a M2M device as a video capture or output device.
+Who: Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+----------------------------
++
+ What: OMAP private DMA implementation
+ When: 2013
+ Why: We have a DMA engine implementation; all users should be updated
+ to use this rather than persisting with the old APIs. The old APIs
+ block merging the old DMA engine implementation into the DMA
+ engine driver.
+ Who: Russell King <linux@arm.linux.org.uk>,
+ Santosh Shilimkar <santosh.shilimkar@ti.com>
+
+ ----------------------------
SA-1110 SoCs. This DMA engine can only be used with on-chip
devices.
+config MMP_TDMA
+ bool "MMP Two-Channel DMA support"
+ depends on ARCH_MMP
+ select DMA_ENGINE
+ help
+ Support the MMP Two-Channel DMA engine.
+ This engine used for MMP Audio DMA and pxa910 SQU.
+
+ Say Y here if you enabled MMP ADMA, otherwise say N.
+
+ config DMA_OMAP
+ tristate "OMAP DMA support"
+ depends on ARCH_OMAP
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+
config DMA_ENGINE
bool
obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o
obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
+obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
+ obj-$(CONFIG_DMA_OMAP) += omap-dma.o
res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
if (!res) {
dev_err(mmc_dev(host->mmc), "cannot get DMA TX channel\n");
+ ret = -ENXIO;
goto err_irq;
}
- host->dma_line_tx = res->start;
+ tx_req = res->start;
res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
if (!res) {
dev_err(mmc_dev(host->mmc), "cannot get DMA RX channel\n");
+ ret = -ENXIO;
goto err_irq;
}
- host->dma_line_rx = res->start;
+ rx_req = res->start;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ host->rx_chan = dma_request_channel(mask, omap_dma_filter_fn, &rx_req);
+ if (!host->rx_chan) {
+ dev_err(mmc_dev(host->mmc), "unable to obtain RX DMA engine channel %u\n", rx_req);
+ ret = -ENXIO;
+ goto err_irq;
+ }
+
+ host->tx_chan = dma_request_channel(mask, omap_dma_filter_fn, &tx_req);
+ if (!host->tx_chan) {
+ dev_err(mmc_dev(host->mmc), "unable to obtain TX DMA engine channel %u\n", tx_req);
+ ret = -ENXIO;
+ goto err_irq;
+ }
/* Request IRQ for MMC operations */
ret = request_irq(host->irq, omap_hsmmc_irq, 0,
if (rx != NULL) {
wait_for_completion(&mcspi_dma->dma_rx_completion);
- dma_unmap_single(&spi->dev, xfer->rx_dma, count, DMA_FROM_DEVICE);
+ dma_unmap_single(mcspi->dev, xfer->rx_dma, count,
+ DMA_FROM_DEVICE);
omap2_mcspi_set_enable(spi, 0);
+ elements = element_count - 1;
+
if (l & OMAP2_MCSPI_CHCONF_TURBO) {
+ elements--;
if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0)
& OMAP2_MCSPI_CHSTAT_RXS)) {
projects / openwrt / staging / blogic.git / commitdiff