ARM: dts: at91: sam9x5: Fix the memory range assigned to the PMC

The memory range assigned to the PMC (Power Management Controller) was
not including the PMC_PCR register which are used to control peripheral
clocks.

This was working fine thanks to the page granularity of ioremap(), but
started to fail when we switched to syscon/regmap, because regmap is
making sure that all accesses are falling into the reserved range.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Richard Genoud <richard.genoud@gmail.com>
Tested-by: Richard Genoud <richard.genoud@gmail.com>
Fixes: 863a81c3be1d ("clk: at91: make use of syscon to share PMC registers in several drivers")
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 0827d594b1f0ef3750146690c5ce11babf1fc65b..cd0cd5fd09a33bdf17b3f609d1e3497b446c9412 100644 (file)
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -106,7 +106,7 @@
 
                        pmc: pmc@fffffc00 {
                                compatible = "atmel,at91sam9x5-pmc", "syscon";
-                               reg = <0xfffffc00 0x100>;
+                               reg = <0xfffffc00 0x200>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
                                interrupt-controller;
                                #address-cells = <1>;