mmc: sdhci: Stop asking for mail
authorPierre Ossman <drzeus@drzeus.cx>
Fri, 9 Feb 2007 07:29:19 +0000 (08:29 +0100)
committerPierre Ossman <drzeus@drzeus.cx>
Fri, 9 Feb 2007 07:29:19 +0000 (08:29 +0100)
We get enough error reports without having to ask for it.
Remove notices about mailing the development list.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
drivers/mmc/sdhci.c

index 38f0f820af68821affbd7953c22509e39e8b589f..7522f76b15ec48db85c9c3091dfb4a933d2ca3ab 100644 (file)
@@ -23,8 +23,6 @@
 
 #define DRIVER_NAME "sdhci"
 
-#define BUGMAIL "<sdhci-devel@list.drzeus.cx>"
-
 #define DBG(f, x...) \
        pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
 
@@ -153,8 +151,7 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask)
        /* hw clears the bit when it's done */
        while (readb(host->ioaddr + SDHCI_SOFTWARE_RESET) & mask) {
                if (timeout == 0) {
-                       printk(KERN_ERR "%s: Reset 0x%x never completed. "
-                               "Please report this to " BUGMAIL ".\n",
+                       printk(KERN_ERR "%s: Reset 0x%x never completed.\n",
                                mmc_hostname(host->mmc), (int)mask);
                        sdhci_dumpregs(host);
                        return;
@@ -473,12 +470,11 @@ static void sdhci_finish_data(struct sdhci_host *host)
 
        if ((data->error == MMC_ERR_NONE) && blocks) {
                printk(KERN_ERR "%s: Controller signalled completion even "
-                       "though there were blocks left. Please report this "
-                       "to " BUGMAIL ".\n", mmc_hostname(host->mmc));
+                       "though there were blocks left.\n",
+                       mmc_hostname(host->mmc));
                data->error = MMC_ERR_FAILED;
        } else if (host->size != 0) {
-               printk(KERN_ERR "%s: %d bytes were left untransferred. "
-                       "Please report this to " BUGMAIL ".\n",
+               printk(KERN_ERR "%s: %d bytes were left untransferred.\n",
                        mmc_hostname(host->mmc), host->size);
                data->error = MMC_ERR_FAILED;
        }
@@ -525,8 +521,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
        while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
                if (timeout == 0) {
                        printk(KERN_ERR "%s: Controller never released "
-                               "inhibit bit(s). Please report this to "
-                               BUGMAIL ".\n", mmc_hostname(host->mmc));
+                               "inhibit bit(s).\n", mmc_hostname(host->mmc));
                        sdhci_dumpregs(host);
                        cmd->error = MMC_ERR_FAILED;
                        tasklet_schedule(&host->finish_tasklet);
@@ -547,8 +542,7 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
        sdhci_set_transfer_mode(host, cmd->data);
 
        if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
-               printk(KERN_ERR "%s: Unsupported response type! "
-                       "Please report this to " BUGMAIL ".\n",
+               printk(KERN_ERR "%s: Unsupported response type!\n",
                        mmc_hostname(host->mmc));
                cmd->error = MMC_ERR_INVALID;
                tasklet_schedule(&host->finish_tasklet);
@@ -646,9 +640,8 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
        while (!((clk = readw(host->ioaddr + SDHCI_CLOCK_CONTROL))
                & SDHCI_CLOCK_INT_STABLE)) {
                if (timeout == 0) {
-                       printk(KERN_ERR "%s: Internal clock never stabilised. "
-                               "Please report this to " BUGMAIL ".\n",
-                               mmc_hostname(host->mmc));
+                       printk(KERN_ERR "%s: Internal clock never "
+                               "stabilised.\n", mmc_hostname(host->mmc));
                        sdhci_dumpregs(host);
                        return;
                }
@@ -898,9 +891,8 @@ static void sdhci_timeout_timer(unsigned long data)
        spin_lock_irqsave(&host->lock, flags);
 
        if (host->mrq) {
-               printk(KERN_ERR "%s: Timeout waiting for hardware interrupt. "
-                       "Please report this to " BUGMAIL ".\n",
-                       mmc_hostname(host->mmc));
+               printk(KERN_ERR "%s: Timeout waiting for hardware "
+                       "interrupt.\n", mmc_hostname(host->mmc));
                sdhci_dumpregs(host);
 
                if (host->data) {
@@ -934,8 +926,6 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
                printk(KERN_ERR "%s: Got command interrupt even though no "
                        "command operation was in progress.\n",
                        mmc_hostname(host->mmc));
-               printk(KERN_ERR "%s: Please report this to " BUGMAIL ".\n",
-                       mmc_hostname(host->mmc));
                sdhci_dumpregs(host);
                return;
        }
@@ -971,8 +961,6 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
                printk(KERN_ERR "%s: Got data interrupt even though no "
                        "data operation was in progress.\n",
                        mmc_hostname(host->mmc));
-               printk(KERN_ERR "%s: Please report this to " BUGMAIL ".\n",
-                       mmc_hostname(host->mmc));
                sdhci_dumpregs(host);
 
                return;
@@ -1044,8 +1032,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
        intmask &= SDHCI_INT_BUS_POWER;
 
        if (intmask) {
-               printk(KERN_ERR "%s: Unexpected interrupt 0x%08x. Please "
-                       "report this to " BUGMAIL ".\n",
+               printk(KERN_ERR "%s: Unexpected interrupt 0x%08x.\n",
                        mmc_hostname(host->mmc), intmask);
                sdhci_dumpregs(host);