ar71xx: register only the built-in switch MDIO bus, hook up eth0 to it, should hopefu...

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48652

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c
index c2e75c278ab7c6e79e6592acacc980448abd3cde..1e724776464bd46fc43d2b108f8a4fdffdb341ae 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c
@@ -100,13 +100,14 @@ static void __init tl_ap151_setup(void)
 
        ath79_setup_ar933x_phy4_switch(false, false);
 
-       ath79_register_mdio(0, 0x0);
+       ath79_register_mdio(1, 0x0);
 
        /* WAN */
        ath79_switch_data.phy4_mii_en = 1;
        ath79_switch_data.phy_poll_mask = BIT(4);
        ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
        ath79_eth0_data.phy_mask = BIT(4);
+       ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
        ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
        ath79_register_eth(0);