ath9k_hw: enable PA linearization

This feature had been disabled in ath9k because the code to support
it was incomplete, but now the code is in sync with the internal QCA
codebase, so it's time to enable it.

On many newer devices, the calibration is assumed to be done with PA
linearization enabled.

Tests with a particular AR933x device showed that the signal emitted
at full power was highly distorted and unreliable with PA linearization
disabled. With this patch, the signal becomes clear and stability
is improved.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index e4b9f35343e5bf9a863a26589fd1b521430663c0..48af40151d2310e5250ad88c0ae05b47d7cae7ea 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -463,9 +463,6 @@ static void ath9k_hw_init_config(struct ath_hw *ah)
                ah->config.spurchans[i][1] = AR_NO_SPUR;
        }
 
-       /* PAPRD needs some more work to be enabled */
-       ah->config.paprd_disable = 1;
-
        ah->config.rx_intr_mitigation = true;
        ah->config.pcieSerDesWrite = true;