{
struct bsg_job_data *dd_data;
struct fc_bsg_job *job;
+ struct lpfc_mbx_nembed_cmd *nembed_sge;
uint32_t size;
unsigned long flags;
uint8_t *to;
memcpy(to, from, size);
} else if ((phba->sli_rev == LPFC_SLI_REV4) &&
(pmboxq->u.mb.mbxCommand == MBX_SLI4_CONFIG)) {
- struct lpfc_mbx_nembed_cmd *nembed_sge =
- (struct lpfc_mbx_nembed_cmd *)
- &pmboxq->u.mb.un.varWords[0];
+ nembed_sge = (struct lpfc_mbx_nembed_cmd *)
+ &pmboxq->u.mb.un.varWords[0];
from = (uint8_t *)dd_data->context_un.mbox.dmp->dma.
virt;
job->reply_payload.sg_cnt,
from, size);
job->reply->result = 0;
-
+ /* need to hold the lock until we set job->dd_data to NULL
+ * to hold off the timeout handler returning to the mid-layer
+ * while we are still processing the job.
+ */
job->dd_data = NULL;
+ dd_data->context_un.mbox.set_job = NULL;
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
job->job_done(job);
+ } else {
+ dd_data->context_un.mbox.set_job = NULL;
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
}
- dd_data->context_un.mbox.set_job = NULL;
- /* need to hold the lock until we call job done to hold off
- * the timeout handler returning to the midlayer while
- * we are stillprocessing the job
- */
- spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
kfree(dd_data->context_un.mbox.mb);
mempool_free(dd_data->context_un.mbox.pmboxq, phba->mbox_mem_pool);
struct ulp_bde64 *rxbpl = NULL;
struct dfc_mbox_req *mbox_req = (struct dfc_mbox_req *)
job->request->rqst_data.h_vendor.vendor_cmd;
+ struct READ_EVENT_LOG_VAR *rdEventLog;
+ uint32_t transmit_length, receive_length, mode;
+ struct lpfc_mbx_nembed_cmd *nembed_sge;
+ struct mbox_header *header;
+ struct ulp_bde64 *bde;
uint8_t *ext = NULL;
int rc = 0;
uint8_t *from;
/* in case no data is transferred */
job->reply->reply_payload_rcv_len = 0;
+ /* sanity check to protect driver */
+ if (job->reply_payload.payload_len > BSG_MBOX_SIZE ||
+ job->request_payload.payload_len > BSG_MBOX_SIZE) {
+ rc = -ERANGE;
+ goto job_done;
+ }
+
/* check if requested extended data lengths are valid */
- if ((mbox_req->inExtWLen > MAILBOX_EXT_SIZE) ||
- (mbox_req->outExtWLen > MAILBOX_EXT_SIZE)) {
+ if ((mbox_req->inExtWLen > BSG_MBOX_SIZE/sizeof(uint32_t)) ||
+ (mbox_req->outExtWLen > BSG_MBOX_SIZE/sizeof(uint32_t))) {
rc = -ERANGE;
goto job_done;
}
* use ours
*/
if (pmb->mbxCommand == MBX_RUN_BIU_DIAG64) {
- uint32_t transmit_length = pmb->un.varWords[1];
- uint32_t receive_length = pmb->un.varWords[4];
+ transmit_length = pmb->un.varWords[1];
+ receive_length = pmb->un.varWords[4];
/* transmit length cannot be greater than receive length or
* mailbox extension size
*/
from += sizeof(MAILBOX_t);
memcpy((uint8_t *)dmp->dma.virt, from, transmit_length);
} else if (pmb->mbxCommand == MBX_READ_EVENT_LOG) {
- struct READ_EVENT_LOG_VAR *rdEventLog =
- &pmb->un.varRdEventLog ;
- uint32_t receive_length = rdEventLog->rcv_bde64.tus.f.bdeSize;
- uint32_t mode = bf_get(lpfc_event_log, rdEventLog);
+ rdEventLog = &pmb->un.varRdEventLog;
+ receive_length = rdEventLog->rcv_bde64.tus.f.bdeSize;
+ mode = bf_get(lpfc_event_log, rdEventLog);
/* receive length cannot be greater than mailbox
* extension size
/* rebuild the command for sli4 using our own buffers
* like we do for biu diags
*/
- uint32_t receive_length = pmb->un.varWords[2];
+ receive_length = pmb->un.varWords[2];
/* receive length cannot be greater than mailbox
* extension size
*/
pmb->un.varWords[4] = putPaddrHigh(dmp->dma.phys);
} else if ((pmb->mbxCommand == MBX_UPDATE_CFG) &&
pmb->un.varUpdateCfg.co) {
- struct ulp_bde64 *bde =
- (struct ulp_bde64 *)&pmb->un.varWords[4];
+ bde = (struct ulp_bde64 *)&pmb->un.varWords[4];
/* bde size cannot be greater than mailbox ext size */
if (bde->tus.f.bdeSize > MAILBOX_EXT_SIZE) {
memcpy((uint8_t *)dmp->dma.virt, from,
bde->tus.f.bdeSize);
} else if (pmb->mbxCommand == MBX_SLI4_CONFIG) {
- struct lpfc_mbx_nembed_cmd *nembed_sge;
- struct mbox_header *header;
- uint32_t receive_length;
-
/* rebuild the command for sli4 using our own buffers
* like we do for biu diags
*/
job->dd_data = NULL;
return rc;
}
+
/**
* lpfc_bsg_hst_vendor - process a vendor-specific fc_bsg_job
* @job: fc_bsg_job to handle
uint32_t xri; /* return the xri of the iocb exchange */
};
+/*
+ * macros and data structures for handling sli-config mailbox command
+ * pass-through support, this header file is shared between user and
+ * kernel spaces, note the set of macros are duplicates from lpfc_hw4.h,
+ * with macro names prefixed with bsg_, as the macros defined in
+ * lpfc_hw4.h are not accessible from user space.
+ */
+
+/* Macros to deal with bit fields. Each bit field must have 3 #defines
+ * associated with it (_SHIFT, _MASK, and _WORD).
+ * EG. For a bit field that is in the 7th bit of the "field4" field of a
+ * structure and is 2 bits in size the following #defines must exist:
+ * struct temp {
+ * uint32_t field1;
+ * uint32_t field2;
+ * uint32_t field3;
+ * uint32_t field4;
+ * #define example_bit_field_SHIFT 7
+ * #define example_bit_field_MASK 0x03
+ * #define example_bit_field_WORD field4
+ * uint32_t field5;
+ * };
+ * Then the macros below may be used to get or set the value of that field.
+ * EG. To get the value of the bit field from the above example:
+ * struct temp t1;
+ * value = bsg_bf_get(example_bit_field, &t1);
+ * And then to set that bit field:
+ * bsg_bf_set(example_bit_field, &t1, 2);
+ * Or clear that bit field:
+ * bsg_bf_set(example_bit_field, &t1, 0);
+ */
+#define bsg_bf_get_le32(name, ptr) \
+ ((le32_to_cpu((ptr)->name##_WORD) >> name##_SHIFT) & name##_MASK)
+#define bsg_bf_get(name, ptr) \
+ (((ptr)->name##_WORD >> name##_SHIFT) & name##_MASK)
+#define bsg_bf_set_le32(name, ptr, value) \
+ ((ptr)->name##_WORD = cpu_to_le32(((((value) & \
+ name##_MASK) << name##_SHIFT) | (le32_to_cpu((ptr)->name##_WORD) & \
+ ~(name##_MASK << name##_SHIFT)))))
+#define bsg_bf_set(name, ptr, value) \
+ ((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \
+ ((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT))))
+
+/*
+ * The sli_config structure specified here is based on the following
+ * restriction:
+ *
+ * -- SLI_CONFIG EMB=0, carrying MSEs, will carry subcommands without
+ * carrying HBD.
+ * -- SLI_CONFIG EMB=1, not carrying MSE, will carry subcommands with or
+ * without carrying HBDs.
+ */
+
+struct lpfc_sli_config_mse {
+ uint32_t pa_lo;
+ uint32_t pa_hi;
+ uint32_t buf_len;
+#define lpfc_mbox_sli_config_mse_len_SHIFT 0
+#define lpfc_mbox_sli_config_mse_len_MASK 0xffffff
+#define lpfc_mbox_sli_config_mse_len_WORD buf_len
+};
+
+struct lpfc_sli_config_subcmd_hbd {
+ uint32_t buf_len;
+#define lpfc_mbox_sli_config_ecmn_hbd_len_SHIFT 0
+#define lpfc_mbox_sli_config_ecmn_hbd_len_MASK 0xffffff
+#define lpfc_mbox_sli_config_ecmn_hbd_len_WORD buf_len
+ uint32_t pa_lo;
+ uint32_t pa_hi;
+};
+
+struct lpfc_sli_config_hdr {
+ uint32_t word1;
+#define lpfc_mbox_hdr_emb_SHIFT 0
+#define lpfc_mbox_hdr_emb_MASK 0x00000001
+#define lpfc_mbox_hdr_emb_WORD word1
+#define lpfc_mbox_hdr_mse_cnt_SHIFT 3
+#define lpfc_mbox_hdr_mse_cnt_MASK 0x0000001f
+#define lpfc_mbox_hdr_mse_cnt_WORD word1
+ uint32_t payload_length;
+ uint32_t tag_lo;
+ uint32_t tag_hi;
+ uint32_t reserved5;
+};
+
+struct lpfc_sli_config_generic {
+ struct lpfc_sli_config_hdr sli_config_hdr;
+#define LPFC_MBX_SLI_CONFIG_MAX_MSE 19
+ struct lpfc_sli_config_mse mse[LPFC_MBX_SLI_CONFIG_MAX_MSE];
+};
+
+struct lpfc_sli_config_subcmnd {
+ struct lpfc_sli_config_hdr sli_config_hdr;
+ uint32_t word6;
+#define lpfc_subcmnd_opcode_SHIFT 0
+#define lpfc_subcmnd_opcode_MASK 0xff
+#define lpfc_subcmnd_opcode_WORD word6
+#define lpfc_subcmnd_subsys_SHIFT 8
+#define lpfc_subcmnd_subsys_MASK 0xff
+#define lpfc_subcmnd_subsys_WORD word6
+ uint32_t timeout;
+ uint32_t request_length;
+ uint32_t word9;
+#define lpfc_subcmnd_version_SHIFT 0
+#define lpfc_subcmnd_version_MASK 0xff
+#define lpfc_subcmnd_version_WORD word9
+ uint32_t word10;
+#define lpfc_subcmnd_ask_rd_len_SHIFT 0
+#define lpfc_subcmnd_ask_rd_len_MASK 0xffffff
+#define lpfc_subcmnd_ask_rd_len_WORD word10
+ uint32_t rd_offset;
+ uint32_t obj_name[26];
+ uint32_t hbd_count;
+#define LPFC_MBX_SLI_CONFIG_MAX_HBD 10
+ struct lpfc_sli_config_subcmd_hbd hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD];
+};
+
+struct lpfc_sli_config_mbox {
+ uint32_t word0;
+#define lpfc_mqe_status_SHIFT 16
+#define lpfc_mqe_status_MASK 0x0000FFFF
+#define lpfc_mqe_status_WORD word0
+#define lpfc_mqe_command_SHIFT 8
+#define lpfc_mqe_command_MASK 0x000000FF
+#define lpfc_mqe_command_WORD word0
+ union {
+ struct lpfc_sli_config_generic sli_config_generic;
+ struct lpfc_sli_config_subcmnd sli_config_subcmnd;
+ } un;
+};
projects / openwrt / staging / blogic.git / commitdiff