* function: This function is to write register and then readback to make
* sure whether BB and RF is OK
* input: net_device *dev
- * HW90_BLOCK_E CheckBlock
+ * hw90_block_e CheckBlock
* RF90_RADIO_PATH_E eRFPath //only used when checkblock is
* //HW90_BLOCK_RF
* output: none
* return: return whether BB and RF is ok (0:OK, 1:Fail)
* notice: This function may be removed in the ASIC
******************************************************************************/
-u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, enum HW90_BLOCK_E CheckBlock,
+u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, enum hw90_block_e CheckBlock,
enum RF90_RADIO_PATH_E eRFPath)
{
u8 ret = 0;
/* ----Ckeck FPGAPHY0 and PHY1 board is OK---- */
/* TODO: this function should be removed on ASIC */
- for (eCheckItem = (enum HW90_BLOCK_E)HW90_BLOCK_PHY0;
+ for (eCheckItem = (enum hw90_block_e)HW90_BLOCK_PHY0;
eCheckItem <= HW90_BLOCK_PHY1; eCheckItem++) {
/* don't care RF path */
- status = rtl8192_phy_checkBBAndRF(dev, (enum HW90_BLOCK_E)eCheckItem,
+ status = rtl8192_phy_checkBBAndRF(dev, (enum hw90_block_e)eCheckItem,
(enum RF90_RADIO_PATH_E)0);
if (status != 0) {
RT_TRACE((COMP_ERR | COMP_PHY),
u32 ms_delay;
} __packed;
-enum HW90_BLOCK_E {
+enum hw90_block_e {
HW90_BLOCK_MAC = 0,
HW90_BLOCK_PHY0 = 1,
HW90_BLOCK_PHY1 = 2,
void rtl8192_phy_configmac(struct net_device *dev);
void rtl8192_phyConfigBB(struct net_device *dev, u8 ConfigType);
u8 rtl8192_phy_checkBBAndRF(struct net_device *dev,
- enum HW90_BLOCK_E CheckBlock,
+ enum hw90_block_e CheckBlock,
enum RF90_RADIO_PATH_E eRFPath);
void rtl8192_BBConfig(struct net_device *dev);
void rtl8192_phy_getTxPower(struct net_device *dev);