ARM: imx: source gpt per clk from OSC for system timer

On i.MX6Q TO > 1.0, i.MX6DL and i.MX6SX, gpt per clock
can be from OSC instead of ipg_per, as ipg_per's rate
may be scaled when system enter low bus mode, to keep
system timer NOT drift, better to make gpt per clock
at fixed rate, here add support for gpt per clock to
be from OSC which is at fixed rate always.

There are some difference on this implementation of
gpt per clock source, see below for details:

i.MX6Q TO > 1.0: GPT_CR_CLKSRC, b'101 selects fix clock
    of OSC / 8 for gpt per clk;
i.MX6DL and i.MX6SX: GPT_CR_CLKSRC, b'101 selects OSC
    for gpt per clk, and we must enable GPT_CR_24MEM to
    enable OSC clk source for gpt per, GPT_PR_PRESCALER24M
    is for pre-scaling of this OSC clk, here set it to 8
    to make gpt per clk is 3MHz;
i.MX6SL: ipg_per can be from OSC directly, so no need to
    implement this new clk source for gpt per.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index bf92e5a351c05e384136f206b1651e56b9e6e46f..15d18e198303f16ae6a77bf476c46acd066a6886 100644 (file)
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -60,17 +60,22 @@
 #define MX2_TSTAT_CAPT         (1 << 1)
 #define MX2_TSTAT_COMP         (1 << 0)
 
-/* MX31, MX35, MX25, MX5 */
+/* MX31, MX35, MX25, MX5, MX6 */
 #define V2_TCTL_WAITEN         (1 << 3) /* Wait enable mode */
 #define V2_TCTL_CLK_IPG                (1 << 6)
 #define V2_TCTL_CLK_PER                (2 << 6)
+#define V2_TCTL_CLK_OSC_DIV8   (5 << 6)
 #define V2_TCTL_FRR            (1 << 9)
+#define V2_TCTL_24MEN          (1 << 10)
+#define V2_TPRER_PRE24M                12
 #define V2_IR                  0x0c
 #define V2_TSTAT               0x08
 #define V2_TSTAT_OF1           (1 << 0)
 #define V2_TCN                 0x24
 #define V2_TCMP                        0x10
 
+#define V2_TIMER_RATE_OSC_DIV8 3000000
+
 #define timer_is_v1()  (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
 #define timer_is_v2()  (!timer_is_v1())
 
@@ -312,10 +317,22 @@ static void __init _mxc_timer_init(int irq,
        __raw_writel(0, timer_base + MXC_TCTL);
        __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
 
-       if (timer_is_v2())
-               tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
-       else
+       if (timer_is_v2()) {
+               tctl_val = V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
+               if (clk_get_rate(clk_per) == V2_TIMER_RATE_OSC_DIV8) {
+                       tctl_val |= V2_TCTL_CLK_OSC_DIV8;
+                       if (cpu_is_imx6dl() || cpu_is_imx6sx()) {
+                               /* 24 / 8 = 3 MHz */
+                               __raw_writel(7 << V2_TPRER_PRE24M,
+                                       timer_base + MXC_TPRER);
+                               tctl_val |= V2_TCTL_24MEN;
+                       }
+               } else {
+                       tctl_val |= V2_TCTL_CLK_PER;
+               }
+       } else {
                tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
+       }
 
        __raw_writel(tctl_val, timer_base + MXC_TCTL);
 
@@ -349,9 +366,13 @@ static void __init mxc_timer_init_dt(struct device_node *np)
        WARN_ON(!timer_base);
        irq = irq_of_parse_and_map(np, 0);
 
-       clk_per = of_clk_get_by_name(np, "per");
        clk_ipg = of_clk_get_by_name(np, "ipg");
 
+       /* Try osc_per first, and fall back to per otherwise */
+       clk_per = of_clk_get_by_name(np, "osc_per");
+       if (IS_ERR(clk_per))
+               clk_per = of_clk_get_by_name(np, "per");
+
        _mxc_timer_init(irq, clk_per, clk_ipg);
 }
 CLOCKSOURCE_OF_DECLARE(mx1_timer, "fsl,imx1-gpt", mxc_timer_init_dt);