xtensa: Tweak xuartps UART driver Rx watermark for Cadence CSP config.

Add module parameter xilinx_uartps.rx_trigger_level=32 to command line
options for CSP to set Rx watermark for xuartps driver lower than the
default value, to avoid UART overruns at 115200 bps.

Signed-off-by: Scott Telford <stelford@cadence.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

diff --git a/arch/xtensa/boot/dts/csp.dts b/arch/xtensa/boot/dts/csp.dts
index 197aeadb3f905b200a8a38ac5177184cb9805749..4082f26716b9a56768946568b267c04bf7f00764 100644 (file)
--- a/arch/xtensa/boot/dts/csp.dts
+++ b/arch/xtensa/boot/dts/csp.dts
@@ -7,7 +7,7 @@
        interrupt-parent = <&pic>;
 
        chosen {
-               bootargs = "earlycon=cdns,0xfd000000,115200 console=tty0 console=ttyPS0,115200 root=/dev/ram0 rw earlyprintk loglevel=8 nohz=off ignore_loglevel";
+               bootargs = "earlycon=cdns,0xfd000000,115200 console=tty0 console=ttyPS0,115200 root=/dev/ram0 rw earlyprintk xilinx_uartps.rx_trigger_level=32 loglevel=8 nohz=off ignore_loglevel";
        };
 
        memory@0 {