To compile this driver as a module, choose M here: the
module will be called softdog.
+# ALPHA Architecture
+
# ARM Architecture
config AT91RM9200_WATCHDOG
config IOP_WATCHDOG
tristate "IOP Watchdog"
- depends on WATCHDOG && PLAT_IOP
+ depends on PLAT_IOP
select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X)
help
Say Y here if to include support for the watchdog timer
config DAVINCI_WATCHDOG
tristate "DaVinci watchdog"
- depends on WATCHDOG && ARCH_DAVINCI
+ depends on ARCH_DAVINCI
help
Say Y here if to include support for the watchdog timer
in the DaVinci DM644x/DM646x processors.
NOTE: once enabled, this timer cannot be disabled.
Say N if you are unsure.
+# ARM26 Architecture
+
# AVR32 Architecture
config AT32AP700X_WDT
tristate "AT32AP700x watchdog"
- depends on WATCHDOG && CPU_AT32AP7000
+ depends on CPU_AT32AP7000
help
Watchdog timer embedded into AT32AP700x devices. This will reboot
your system when the timeout is reached.
-# Blackfin Architecture
+# BLACKFIN Architecture
config BFIN_WDT
tristate "Blackfin On-Chip Watchdog Timer"
- depends on WATCHDOG && BLACKFIN
+ depends on BLACKFIN
---help---
If you say yes here you will get support for the Blackfin On-Chip
Watchdog Timer. If you have one of these processors and wish to
To compile this driver as a module, choose M here: the
module will be called bfin_wdt.
+# CRIS Architecture
+
+# FRV Architecture
+
+# H8300 Architecture
+
# X86 (i386 + ia64 + x86_64) Architecture
config ACQUIRE_WDT
To compile this driver as a module, choose M here: the
module will be called sbc_epx_c3.
-# PowerPC Architecture
+# M32R Architecture
-config 8xx_WDT
- tristate "MPC8xx Watchdog Timer"
- depends on 8xx
+# M68K Architecture
+
+# M68KNOMMU Architecture
+
+# MIPS Architecture
+
+config INDYDOG
+ tristate "Indy/I2 Hardware Watchdog"
+ depends on SGI_IP22
+ help
+ Hardware driver for the Indy's/I2's watchdog. This is a
+ watchdog timer that will reboot the machine after a 60 second
+ timer expired and no process has written to /dev/watchdog during
+ that time.
+
+config WDT_MTX1
+ tristate "MTX-1 Hardware Watchdog"
+ depends on MIPS_MTX1
+ help
+ Hardware driver for the MTX-1 boards. This is a watchdog timer that
+ will reboot the machine after a 100 seconds timer expired.
+
+config WDT_RM9K_GPI
+ tristate "RM9000/GPI hardware watchdog"
+ depends on CPU_RM9000
+ help
+ Watchdog implementation using the GPI hardware found on
+ PMC-Sierra RM9xxx CPUs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rm9k_wdt.
+
+# PARISC Architecture
+
+# POWERPC Architecture
config MPC5200_WDT
tristate "MPC5200 Watchdog Timer"
depends on PPC_MPC52xx
+config 8xx_WDT
+ tristate "MPC8xx Watchdog Timer"
+ depends on 8xx
+
config 83xx_WDT
tristate "MPC83xx Watchdog Timer"
depends on PPC_83xx
To compile this driver as a module, choose M here. The module
will be called wdrtas.
-# MIPS Architecture
-
-config INDYDOG
- tristate "Indy/I2 Hardware Watchdog"
- depends on SGI_IP22
- help
- Hardware driver for the Indy's/I2's watchdog. This is a
- watchdog timer that will reboot the machine after a 60 second
- timer expired and no process has written to /dev/watchdog during
- that time.
-
-config WDT_MTX1
- tristate "MTX-1 Hardware Watchdog"
- depends on MIPS_MTX1
- help
- Hardware driver for the MTX-1 boards. This is a watchdog timer that
- will reboot the machine after a 100 seconds timer expired.
-
-config WDT_RM9K_GPI
- tristate "RM9000/GPI hardware watchdog"
- depends on CPU_RM9000
- help
- Watchdog implementation using the GPI hardware found on
- PMC-Sierra RM9xxx CPUs.
-
- To compile this driver as a module, choose M here: the
- module will be called rm9k_wdt.
-
# S390 Architecture
config ZVM_WATCHDOG
To compile this driver as a module, choose M here. The module
will be called vmwatchdog.
-# SUPERH Architecture
+# SUPERH (sh + sh64) Architecture
config SH_WDT
tristate "SuperH Watchdog"
If you say Y here, user applications will be able to mmap the
WDT/CPG registers.
+# SPARC Architecture
+
# SPARC64 Architecture
config WATCHDOG_CP1XXX
machines. The watchdog timeout period is normally one minute but
can be changed with a boot-time parameter.
+# V850 Architecture
+
+# XTENSA Architecture
+
#
# ISA-based Watchdog Cards
#
# USB-based Watchdog Cards
obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
+# ALPHA Architecture
+
# ARM Architecture
obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
+# ARM26 Architecture
+
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
-# Blackfin Architecture
+# BLACKFIN Architecture
obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o
+# CRIS Architecture
+
+# FRV Architecture
+
+# H8300 Architecture
+
# X86 (i386 + ia64 + x86_64) Architecture
obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
obj-$(CONFIG_MACHZ_WDT) += machzwd.o
obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
-# PowerPC Architecture
+# M32R Architecture
+
+# M68K Architecture
+
+# M68KNOMMU Architecture
+
+# MIPS Architecture
+obj-$(CONFIG_INDYDOG) += indydog.o
+obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
+obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
+
+# PARISC Architecture
+
+# POWERPC Architecture
obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
obj-$(CONFIG_MPC5200_WDT) += mpc5200_wdt.o
obj-$(CONFIG_83xx_WDT) += mpc83xx_wdt.o
# PPC64 Architecture
obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
-# MIPS Architecture
-obj-$(CONFIG_INDYDOG) += indydog.o
-obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
-obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
-
# S390 Architecture
-# SUPERH Architecture
+# SUPERH (sh + sh64) Architecture
obj-$(CONFIG_SH_WDT) += shwdt.o
+# SPARC Architecture
+
# SPARC64 Architecture
+# V850 Architecture
+
+# XTENSA Architecture
+
# Architecture Independant
obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
projects / openwrt / staging / blogic.git / commitdiff