tty: serial: 8250: add MOXA Smartio MUE boards support

Add support for :

- CP-102E: 2 ports RS232 PCIE card
- CP-102EL: 2 ports RS232 PCIE card
- CP-132EL: 2 ports RS422/485 PCIE card
- CP-114EL: 4 ports RS232/422/485 PCIE card
- CP-104EL-A: 4 ports RS232 PCIE card
- CP-168EL-A: 8 ports RS232 PCIE card
- CP-118EL-A: 8 ports RS232/422/485 PCIE card
- CP-118E-A: 8 ports RS422/485 PCIE card
- CP-138E-A: 8 ports RS422/485 PCIE card
- CP-134EL-A: 4 ports RS422/485 PCIE card
- CP-116E-A (A): 8 ports RS232/422/485 PCIE card
- CP-116E-A (B): 8 ports RS232/422/485 PCIE card

This patch is based on information extracted from
vendor mxupcie driver available on MOXA website.

I was able to test it on a CP-168EL-A on PC.

Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/8250/8250_moxa.c b/drivers/tty/serial/8250/8250_moxa.c
new file mode 100644 (file)
index 0000000..26eb539
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_moxa.c
@@ -0,0 +1,157 @@
+/*
+ * 8250_moxa.c - MOXA Smartio/Industio MUE multiport serial driver.
+ *
+ * Author: Mathieu OTHACEHE <m.othacehe@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "8250.h"
+
+#define        PCI_DEVICE_ID_MOXA_CP102E       0x1024
+#define        PCI_DEVICE_ID_MOXA_CP102EL      0x1025
+#define        PCI_DEVICE_ID_MOXA_CP104EL_A    0x1045
+#define        PCI_DEVICE_ID_MOXA_CP114EL      0x1144
+#define        PCI_DEVICE_ID_MOXA_CP116E_A_A   0x1160
+#define        PCI_DEVICE_ID_MOXA_CP116E_A_B   0x1161
+#define        PCI_DEVICE_ID_MOXA_CP118EL_A    0x1182
+#define        PCI_DEVICE_ID_MOXA_CP118E_A_I   0x1183
+#define        PCI_DEVICE_ID_MOXA_CP132EL      0x1322
+#define        PCI_DEVICE_ID_MOXA_CP134EL_A    0x1342
+#define        PCI_DEVICE_ID_MOXA_CP138E_A     0x1381
+#define        PCI_DEVICE_ID_MOXA_CP168EL_A    0x1683
+
+#define MOXA_BASE_BAUD 921600
+#define MOXA_UART_OFFSET 0x200
+#define MOXA_BASE_BAR 1
+
+struct moxa8250_board {
+       unsigned int num_ports;
+       int line[0];
+};
+
+enum {
+       moxa8250_2p = 0,
+       moxa8250_4p,
+       moxa8250_8p
+};
+
+static struct moxa8250_board moxa8250_boards[] = {
+       [moxa8250_2p] = { .num_ports = 2},
+       [moxa8250_4p] = { .num_ports = 4},
+       [moxa8250_8p] = { .num_ports = 8},
+};
+
+static int moxa8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+       struct uart_8250_port uart;
+       struct moxa8250_board *brd;
+       void __iomem *ioaddr;
+       resource_size_t baseaddr;
+       unsigned int i, nr_ports;
+       unsigned int offset;
+       int ret;
+
+       brd = &moxa8250_boards[id->driver_data];
+       nr_ports = brd->num_ports;
+
+       ret = pcim_enable_device(pdev);
+       if (ret)
+               return ret;
+
+       brd = devm_kzalloc(&pdev->dev, sizeof(struct moxa8250_board) +
+                          sizeof(unsigned int) * nr_ports, GFP_KERNEL);
+       if (!brd)
+               return -ENOMEM;
+
+       memset(&uart, 0, sizeof(struct uart_8250_port));
+
+       uart.port.dev = &pdev->dev;
+       uart.port.irq = pdev->irq;
+       uart.port.uartclk = MOXA_BASE_BAUD * 16;
+       uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+
+       baseaddr = pci_resource_start(pdev, MOXA_BASE_BAR);
+       ioaddr = pcim_iomap(pdev, MOXA_BASE_BAR, 0);
+       if (!ioaddr)
+               return -ENOMEM;
+
+       for (i = 0; i < nr_ports; i++) {
+
+               /*
+                * MOXA Smartio MUE boards with 4 ports have
+                * a different offset for port #3
+                */
+               if (nr_ports == 4 && i == 3)
+                       offset = 7 * MOXA_UART_OFFSET;
+               else
+                       offset = i * MOXA_UART_OFFSET;
+
+               uart.port.iotype = UPIO_MEM;
+               uart.port.iobase = 0;
+               uart.port.mapbase = baseaddr + offset;
+               uart.port.membase = ioaddr + offset;
+               uart.port.regshift = 0;
+
+               dev_dbg(&pdev->dev, "Setup PCI port: port %lx, irq %d, type %d\n",
+                       uart.port.iobase, uart.port.irq, uart.port.iotype);
+
+               brd->line[i] = serial8250_register_8250_port(&uart);
+               if (brd->line[i] < 0) {
+                       dev_err(&pdev->dev,
+                               "Couldn't register serial port %lx, irq %d, type %d, error %d\n",
+                               uart.port.iobase, uart.port.irq,
+                               uart.port.iotype, brd->line[i]);
+                       break;
+               }
+       }
+
+       pci_set_drvdata(pdev, brd);
+       return 0;
+}
+
+static void moxa8250_remove(struct pci_dev *pdev)
+{
+       struct moxa8250_board *brd = pci_get_drvdata(pdev);
+       unsigned int i;
+
+       for (i = 0; i < brd->num_ports; i++)
+               serial8250_unregister_port(brd->line[i]);
+}
+
+#define MOXA_DEVICE(id, data) { PCI_VDEVICE(MOXA, id), (kernel_ulong_t)data }
+
+static const struct pci_device_id pci_ids[] = {
+       MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP102E, moxa8250_2p),
+       MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP102EL, moxa8250_2p),
+       MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP104EL_A, moxa8250_4p),
+       MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP114EL, moxa8250_4p),
+       MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP116E_A_A, moxa8250_8p),
+       MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP116E_A_B, moxa8250_8p),
+       MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP118EL_A, moxa8250_8p),
+       MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP118E_A_I, moxa8250_8p),
+       MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP132EL, moxa8250_2p),
+       MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP134EL_A, moxa8250_4p),
+       MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP138E_A, moxa8250_8p),
+       MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP168EL_A, moxa8250_8p),
+       {0}
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static struct pci_driver moxa8250_pci_driver = {
+       .name           = "8250_moxa",
+       .id_table       = pci_ids,
+       .probe          = moxa8250_probe,
+       .remove         = moxa8250_remove,
+};
+
+module_pci_driver(moxa8250_pci_driver);
+
+MODULE_AUTHOR("Mathieu OTHACEHE");
+MODULE_DESCRIPTION("MOXA SmartIO MUE driver");
+MODULE_LICENSE("GPL v2");

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index fb64c74c4256a12f838753697f52491d6b6ada64..98862aa5bb58c6cf51ac5b283cca61549a965a9e 100644 (file)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -3800,6 +3800,20 @@ static const struct pci_device_id blacklist[] = {
        { PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */
        { PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */
 
+       /* Moxa Smartio MUE boards handled by 8250_moxa */
+       { PCI_VDEVICE(MOXA, 0x1024), },
+       { PCI_VDEVICE(MOXA, 0x1025), },
+       { PCI_VDEVICE(MOXA, 0x1045), },
+       { PCI_VDEVICE(MOXA, 0x1144), },
+       { PCI_VDEVICE(MOXA, 0x1160), },
+       { PCI_VDEVICE(MOXA, 0x1161), },
+       { PCI_VDEVICE(MOXA, 0x1182), },
+       { PCI_VDEVICE(MOXA, 0x1183), },
+       { PCI_VDEVICE(MOXA, 0x1322), },
+       { PCI_VDEVICE(MOXA, 0x1342), },
+       { PCI_VDEVICE(MOXA, 0x1381), },
+       { PCI_VDEVICE(MOXA, 0x1683), },
+
        /* Intel platforms with MID UART */
        { PCI_VDEVICE(INTEL, 0x081b), },
        { PCI_VDEVICE(INTEL, 0x081c), },

diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index bb1b95a1f8b0f516bd3edbba48b31c644cae0eaf..6d206001336b5e9dfefd58177dd68ad9b662b834 100644 (file)
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -404,6 +404,16 @@ config SERIAL_8250_MID
          present on the UART found on Intel Medfield SOC and various other
          Intel platforms.
 
+config SERIAL_8250_MOXA
+       tristate "MOXA SmartIO MUE support"
+       depends on SERIAL_8250 && PCI
+       help
+         Say Y here if you have a Moxa SmartIO MUE multiport serial card.
+         If unsure, say N.
+
+         This driver can also be built as a module. The module will be called
+         8250_moxa. If you want to do that, say M here.
+
 config SERIAL_OF_PLATFORM
        tristate "Devicetree based probing for 8250 ports"
        depends on SERIAL_8250 && OF

diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 5c1869fdfd4cf9405e1beae80a90a0389edbfabe..c9a2d6ed87e9fe399caa619b4c84f42a815384d0 100644 (file)
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_SERIAL_8250_MT6577)      += 8250_mtk.o
 obj-$(CONFIG_SERIAL_8250_UNIPHIER)     += 8250_uniphier.o
 obj-$(CONFIG_SERIAL_8250_INGENIC)      += 8250_ingenic.o
 obj-$(CONFIG_SERIAL_8250_MID)          += 8250_mid.o
+obj-$(CONFIG_SERIAL_8250_MOXA)         += 8250_moxa.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM)       += 8250_of.o
 
 CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt