dt-bindings: usb: Convert the generic EHCI binding to YAML

The generic EHCI binding is used by many controllers that are using the
EHCI spec.

Convert that binding to a YAML description to enable the validation on all
the nodes using that binding.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
new file mode 100644 (file)
index 0000000..d3b4f64
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/generic-ehci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB EHCI Controller Device Tree Bindings
+
+allOf:
+  - $ref: "usb-hcd.yaml"
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+properties:
+  compatible:
+    contains:
+      const: generic-ehci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 4
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: |
+      In case the Renesas R-Car Gen3 SoCs:
+        - if a host only channel: first clock should be host.
+        - if a USB DRD channel: first clock should be host and second
+          one should be peripheral
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag for HCDs with big endian descriptors and big
+      endian registers.
+
+  big-endian-desc:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag for HCDs with big endian descriptors.
+
+  big-endian-regs:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag for HCDs with big endian registers.
+
+  has-transaction-translator:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag if EHCI has a Transaction Translator built into
+      the root hub.
+
+  needs-reset-on-resume:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag to force EHCI reset after resume.
+
+  phys: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    ehci@e0000300 {
+        compatible = "ibm,usb-ehci-440epx", "generic-ehci";
+        interrupt-parent = <&UIC0>;
+        interrupts = <0x1a 4>;
+        reg = <0 0xe0000300 90 0 0xe0000390 70>;
+        big-endian;
+    };
+
+  - |
+    ehci0: usb@1c14000 {
+        compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+        reg = <0x01c14000 0x100>;
+        interrupts = <39>;
+        clocks = <&ahb_gates 1>;
+        phys = <&usbphy 1>;
+        phy-names = "usb";
+    };
+
+...

diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
deleted file mode 100644 (file)
index 406252d..0000000
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-USB EHCI controllers
-
-Required properties:
-  - compatible : should be "generic-ehci".
-  - reg : should contain at least address and length of the standard EHCI
-    register set for the device. Optional platform-dependent registers
-    (debug-port or other) can be also specified here, but only after
-    definition of standard EHCI registers.
-  - interrupts : one EHCI interrupt should be described here.
-
-Optional properties:
- - big-endian-regs : boolean, set this for hcds with big-endian registers
- - big-endian-desc : boolean, set this for hcds with big-endian descriptors
- - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
- - needs-reset-on-resume : boolean, set this to force EHCI reset after resume
- - has-transaction-translator : boolean, set this if EHCI have a Transaction
-                               Translator built into the root hub.
- - clocks : a list of phandle + clock specifier pairs. In case of Renesas
-           R-Car Gen3 SoCs:
-           - if a host only channel: first clock should be host.
-           - if a USB DRD channel: first clock should be host and second one
-                                   should be peripheral.
- - phys : see usb-hcd.txt in the current directory
- - resets : phandle + reset specifier pair
-
-additionally the properties from usb-hcd.txt (in the current directory) are
-supported.
-
-Example (Sequoia 440EPx):
-    ehci@e0000300 {
-          compatible = "ibm,usb-ehci-440epx", "usb-ehci";
-          interrupt-parent = <&UIC0>;
-          interrupts = <1a 4>;
-          reg = <0 e0000300 90 0 e0000390 70>;
-          big-endian;
-   };
-
-Example (Allwinner sun4i A10 SoC):
-   ehci0: usb@1c14000 {
-          compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
-          reg = <0x01c14000 0x100>;
-          interrupts = <39>;
-          clocks = <&ahb_gates 1>;
-          phys = <&usbphy 1>;
-          phy-names = "usb";
-   };