sh: fix irqs for the second serial port on sh7206

This patch makes sure the serial port interrupt irqs matches the
datasheet.  Only irqs for SCIF1 are changed. While at some cosmetic
spaces are added.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
index deab16500167c79fdd1fcec616ffc19f01114275..a9f11a37212db55a68a66f5a3b9b3717a1e046dc 100644 (file)
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
@@ -17,22 +17,22 @@ static struct plat_sci_port sci_platform_data[] = {
                .mapbase        = 0xfffe8000,
                .flags          = UPF_BOOT_AUTOCONF,
                .type           = PORT_SCIF,
-               .irqs           =  { 241, 242, 243, 240},
+               .irqs           =  { 241, 242, 243, 240 },
        }, {
                .mapbase        = 0xfffe8800,
                .flags          = UPF_BOOT_AUTOCONF,
                .type           = PORT_SCIF,
-               .irqs           =  { 247, 244, 245, 246},
+               .irqs           =  { 245, 246, 247, 244 },
        }, {
                .mapbase        = 0xfffe9000,
                .flags          = UPF_BOOT_AUTOCONF,
                .type           = PORT_SCIF,
-               .irqs           =  { 249, 250, 251, 248},
+               .irqs           =  { 249, 250, 251, 248 },
        }, {
                .mapbase        = 0xfffe9800,
                .flags          = UPF_BOOT_AUTOCONF,
                .type           = PORT_SCIF,
-               .irqs           =  { 253, 254, 255, 252},
+               .irqs           =  { 253, 254, 255, 252 },
        }, {
                .flags = 0,
        }