soc: bcm2835: sync firmware properties with downstream

Add latest firmware property tags from the latest Raspberry Pi downstream
kernel. This is needed to use the reboot notify in the following
commit.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
index 4be1aa4435ae5e97a6b0b1ac42fcc808102e80b8..7800e12ee042ced0669b14c8b3cedb777bb43440 100644 (file)
--- a/include/soc/bcm2835/raspberrypi-firmware.h
+++ b/include/soc/bcm2835/raspberrypi-firmware.h
@@ -73,6 +73,8 @@ enum rpi_firmware_property_tag {
        RPI_FIRMWARE_GET_CUSTOMER_OTP =                       0x00030021,
        RPI_FIRMWARE_GET_DOMAIN_STATE =                       0x00030030,
        RPI_FIRMWARE_GET_THROTTLED =                          0x00030046,
+       RPI_FIRMWARE_GET_CLOCK_MEASURED =                     0x00030047,
+       RPI_FIRMWARE_NOTIFY_REBOOT =                          0x00030048,
        RPI_FIRMWARE_SET_CLOCK_STATE =                        0x00038001,
        RPI_FIRMWARE_SET_CLOCK_RATE =                         0x00038002,
        RPI_FIRMWARE_SET_VOLTAGE =                            0x00038003,
@@ -86,6 +88,8 @@ enum rpi_firmware_property_tag {
        RPI_FIRMWARE_SET_GPIO_CONFIG =                        0x00038043,
        RPI_FIRMWARE_GET_PERIPH_REG =                         0x00030045,
        RPI_FIRMWARE_SET_PERIPH_REG =                         0x00038045,
+       RPI_FIRMWARE_GET_POE_HAT_VAL =                        0x00030049,
+       RPI_FIRMWARE_SET_POE_HAT_VAL =                        0x00030050,
 
 
        /* Dispmanx TAGS */