* Also, it should adjust ns so that it cooresponds to the actual time
* that the device will use.
*/
-static int s626_ns_to_timer(int *nanosec, int round_mode)
+static int s626_ns_to_timer(unsigned int *nanosec, int round_mode)
{
int divider, base;
* interval
*/
k = &s626_enc_chan_info[5];
- tick = s626_ns_to_timer((int *)&cmd->scan_begin_arg,
+ tick = s626_ns_to_timer(&cmd->scan_begin_arg,
cmd->flags & TRIG_ROUND_MASK);
/* load timer value and enable interrupt */
* interval
*/
k = &s626_enc_chan_info[4];
- tick = s626_ns_to_timer((int *)&cmd->convert_arg,
+ tick = s626_ns_to_timer(&cmd->convert_arg,
cmd->flags & TRIG_ROUND_MASK);
/* load timer value and enable interrupt */
struct comedi_subdevice *s, struct comedi_cmd *cmd)
{
int err = 0;
- int tmp;
+ unsigned int arg;
/* Step 1 : check if triggers are trivially valid */
/* step 4: fix up any arguments */
if (cmd->scan_begin_src == TRIG_TIMER) {
- tmp = cmd->scan_begin_arg;
- s626_ns_to_timer((int *)&cmd->scan_begin_arg,
- cmd->flags & TRIG_ROUND_MASK);
- if (tmp != cmd->scan_begin_arg)
- err++;
+ arg = cmd->scan_begin_arg;
+ s626_ns_to_timer(&arg, cmd->flags & TRIG_ROUND_MASK);
+ err |= cfc_check_trigger_arg_is(&cmd->scan_begin_arg, arg);
}
+
if (cmd->convert_src == TRIG_TIMER) {
- tmp = cmd->convert_arg;
- s626_ns_to_timer((int *)&cmd->convert_arg,
- cmd->flags & TRIG_ROUND_MASK);
- if (tmp != cmd->convert_arg)
- err++;
- if (cmd->scan_begin_src == TRIG_TIMER &&
- cmd->scan_begin_arg < cmd->convert_arg *
- cmd->scan_end_arg) {
- cmd->scan_begin_arg = cmd->convert_arg *
- cmd->scan_end_arg;
- err++;
+ arg = cmd->convert_arg;
+ s626_ns_to_timer(&arg, cmd->flags & TRIG_ROUND_MASK);
+ err |= cfc_check_trigger_arg_is(&cmd->convert_arg, arg);
+
+ if (cmd->scan_begin_src == TRIG_TIMER) {
+ arg = cmd->convert_arg * cmd->scan_end_arg;
+ err |= cfc_check_trigger_arg_min(&cmd->scan_begin_arg,
+ arg);
}
}