PCI: imx6: Remove redundant "Link never came up" message

When a PCI card is not connected, the following messages are seen on mx6:

  imx6q-pcie 1ffc000.pcie: phy link never came up
  imx6q-pcie 1ffc000.pcie: Link never came up

The first one comes from the pcie-designware.c core file, so remove
the redundant one from the imx6 driver.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
index c8cefb07821878a100172d28d172e5770894703c..66c3b84a84d782ae03a1d019677e59751750ea58 100644 (file)
--- a/drivers/pci/host/pci-imx6.c
+++ b/drivers/pci/host/pci-imx6.c
@@ -502,10 +502,8 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
                        IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
 
        ret = imx6_pcie_wait_for_link(imx6_pcie);
-       if (ret) {
-               dev_info(dev, "Link never came up\n");
+       if (ret)
                goto err_reset_phy;
-       }
 
        if (imx6_pcie->link_gen == 2) {
                /* Allow Gen2 mode after the link is up. */