spi: add "spi-lsb-first" to devicetree

add optional property devicetree for SPI slave nodes
into devicetree so that LSB mode can be enabled by devicetree.

Signed-off-by: Zhao Qiang <B45475@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt
index e5a4d1b4acfe1efca8b0a41d5d736ddf8187f009..22d57404fdc33cf0a4c5798240fa3f5a32f0dde4 100644 (file)
--- a/Documentation/devicetree/bindings/spi/spi-bus.txt
+++ b/Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -55,6 +55,8 @@ contain the following properties.
                chip select active high
 - spi-3wire       - (optional) Empty property indicating device requires
                    3-wire mode.
+- spi-lsb-first   - (optional) Empty property indicating device requires
+               LSB first mode.
 - spi-tx-bus-width - (optional) The bus width(number of data wires) that
                       used for MOSI. Defaults to 1 if not present.
 - spi-rx-bus-width - (optional) The bus width(number of data wires) that

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 4eb9bf02996cf179cf3e6365421867aaf8a10593..214045c04705dfbe00ffaa2d8931afcf21562378 100644 (file)
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1234,6 +1234,8 @@ static void of_register_spi_devices(struct spi_master *master)
                        spi->mode |= SPI_CS_HIGH;
                if (of_find_property(nc, "spi-3wire", NULL))
                        spi->mode |= SPI_3WIRE;
+               if (of_find_property(nc, "spi-lsb-first", NULL))
+                       spi->mode |= SPI_LSB_FIRST;
 
                /* Device DUAL/QUAD mode */
                if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) {