drivers/rtc/rtc-isl12057.c: report error code upon failure in dev_err() calls
authorArnaud Ebalard <arno@natisbad.org>
Wed, 10 Dec 2014 23:54:11 +0000 (15:54 -0800)
committerLinus Torvalds <torvalds@linux-foundation.org>
Thu, 11 Dec 2014 01:41:16 +0000 (17:41 -0800)
As pointed out by Mark, it is generally useful to log the error code when
reporting a failure.  This patch improves existing calls to dev_err() in
ISL12057 driver to also report error code.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Suggested-by: Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Grant Likely <grant.likely@linaro.org>
Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/rtc/rtc-isl12057.c

index fe562820a54a047f615aa5351b1a9d5986d12b84..6e1fcfb5d7e6517478d9e6191eefc3e013b1ed2a 100644 (file)
@@ -170,8 +170,8 @@ static int isl12057_rtc_read_time(struct device *dev, struct rtc_time *tm)
        mutex_lock(&data->lock);
        ret = regmap_read(data->regmap, ISL12057_REG_SR, &sr);
        if (ret) {
-               dev_err(dev, "%s: unable to read oscillator status flag\n",
-                       __func__);
+               dev_err(dev, "%s: unable to read oscillator status flag (%d)\n",
+                       __func__, ret);
                goto out;
        } else {
                if (sr & ISL12057_REG_SR_OSF) {
@@ -183,7 +183,8 @@ static int isl12057_rtc_read_time(struct device *dev, struct rtc_time *tm)
        ret = regmap_bulk_read(data->regmap, ISL12057_REG_RTC_SC, regs,
                               ISL12057_RTC_SEC_LEN);
        if (ret)
-               dev_err(dev, "%s: unable to read RTC time\n", __func__);
+               dev_err(dev, "%s: unable to read RTC time section (%d)\n",
+                       __func__, ret);
 
 out:
        mutex_unlock(&data->lock);
@@ -210,7 +211,8 @@ static int isl12057_rtc_set_time(struct device *dev, struct rtc_time *tm)
        ret = regmap_bulk_write(data->regmap, ISL12057_REG_RTC_SC, regs,
                                ISL12057_RTC_SEC_LEN);
        if (ret) {
-               dev_err(dev, "%s: writing RTC time failed\n", __func__);
+               dev_err(dev, "%s: unable to write RTC time section (%d)\n",
+                       __func__, ret);
                goto out;
        }
 
@@ -221,7 +223,8 @@ static int isl12057_rtc_set_time(struct device *dev, struct rtc_time *tm)
        ret = regmap_update_bits(data->regmap, ISL12057_REG_SR,
                                 ISL12057_REG_SR_OSF, 0);
        if (ret < 0)
-               dev_err(dev, "Unable to clear oscillator failure bit\n");
+               dev_err(dev, "%s: unable to clear osc. failure bit (%d)\n",
+                       __func__, ret);
 
 out:
        mutex_unlock(&data->lock);
@@ -242,7 +245,8 @@ static int isl12057_check_rtc_status(struct device *dev, struct regmap *regmap)
        ret = regmap_update_bits(regmap, ISL12057_REG_INT,
                                 ISL12057_REG_INT_EOSC, 0);
        if (ret < 0) {
-               dev_err(dev, "Unable to enable oscillator\n");
+               dev_err(dev, "%s: unable to enable oscillator (%d)\n",
+                       __func__, ret);
                return ret;
        }
 
@@ -250,7 +254,8 @@ static int isl12057_check_rtc_status(struct device *dev, struct regmap *regmap)
        ret = regmap_update_bits(regmap, ISL12057_REG_SR,
                                 ISL12057_REG_SR_A1F, 0);
        if (ret < 0) {
-               dev_err(dev, "Unable to clear alarm bit\n");
+               dev_err(dev, "%s: unable to clear alarm bit (%d)\n",
+                       __func__, ret);
                return ret;
        }
 
@@ -284,7 +289,8 @@ static int isl12057_probe(struct i2c_client *client,
        regmap = devm_regmap_init_i2c(client, &isl12057_rtc_regmap_config);
        if (IS_ERR(regmap)) {
                ret = PTR_ERR(regmap);
-               dev_err(dev, "regmap allocation failed: %d\n", ret);
+               dev_err(dev, "%s: regmap allocation failed (%d)\n",
+                       __func__, ret);
                return ret;
        }