ARM: dts: imx28-tx28: Pass unit address and reg to IOMUX node

Pass unit address and reg to IOMUX node to fix the following build
warning with W=1:

arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-edt-ft5x06-pins missing or empty reg/ranges property
arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-flexcan-xcvr-pins missing or empty reg/ranges property
arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-lcdif-23bit missing or empty reg/ranges property
arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-lcdif-ctrl missing or empty reg/ranges property
arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-mac0-gpio-pins missing or empty reg/ranges property
arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-pca9554-pins missing or empty reg/ranges property
arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/spi-gpiogrp missing or empty reg/ranges property
arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-tsc2007-pins missing or empty reg/ranges property
arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-usbphy0-pins missing or empty reg/ranges property
arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-usbphy1-pins missing or empty reg/ranges property

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-By: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 152621ea37db840c35231c440df434e8156eda63..8a4f5bc19a57c2274fdc38261d2bbd2658bef6ea 100644 (file)
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -531,7 +531,8 @@
                fsl,pull-up = <MXS_PULL_DISABLE>;
        };
 
-       tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins {
+       tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins@0 {
+               reg = <0>;
                fsl,pinmux-ids = <
                        MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */
                        MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */
@@ -542,7 +543,8 @@
                fsl,pull-up = <MXS_PULL_DISABLE>;
        };
 
-       tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins {
+       tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins@0 {
+               reg = <0>;
                fsl,pinmux-ids = <
                        MX28_PAD_LCD_D00__GPIO_1_0
                >;
@@ -551,7 +553,8 @@
                fsl,pull-up = <MXS_PULL_DISABLE>;
        };
 
-       tx28_lcdif_23bit_pins: tx28-lcdif-23bit {
+       tx28_lcdif_23bit_pins: tx28-lcdif-23bit@0 {
+               reg = <0>;
                fsl,pinmux-ids = <
                        /* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */
                        MX28_PAD_LCD_D01__LCD_D1
@@ -583,7 +586,8 @@
                fsl,pull-up = <MXS_PULL_DISABLE>;
        };
 
-       tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl {
+       tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl@0 {
+               reg = <0>;
                fsl,pinmux-ids = <
                        MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */
                        MX28_PAD_LCD_RESET__GPIO_3_30  /* Reset */
@@ -593,7 +597,8 @@
                fsl,pull-up = <MXS_PULL_DISABLE>;
        };
 
-       tx28_mac0_pins_gpio: tx28-mac0-gpio-pins {
+       tx28_mac0_pins_gpio: tx28-mac0-gpio-pins@0 {
+               reg = <0>;
                fsl,pinmux-ids = <
                        MX28_PAD_ENET0_MDC__GPIO_4_0
                        MX28_PAD_ENET0_MDIO__GPIO_4_1
@@ -610,7 +615,8 @@
                fsl,pull-up = <MXS_PULL_DISABLE>;
        };
 
-       tx28_pca9554_pins: tx28-pca9554-pins {
+       tx28_pca9554_pins: tx28-pca9554-pins@0 {
+               reg = <0>;
                fsl,pinmux-ids = <
                        MX28_PAD_PWM3__GPIO_3_28
                >;
@@ -619,7 +625,8 @@
                fsl,pull-up = <MXS_PULL_DISABLE>;
        };
 
-       tx28_spi_gpio_pins: spi-gpiogrp {
+       tx28_spi_gpio_pins: spi-gpiogrp@0 {
+               reg = <0>;
                fsl,pinmux-ids = <
                        MX28_PAD_AUART2_RX__GPIO_3_8
                        MX28_PAD_AUART2_TX__GPIO_3_9
@@ -633,7 +640,8 @@
                fsl,pull-up = <MXS_PULL_DISABLE>;
        };
 
-       tx28_tsc2007_pins: tx28-tsc2007-pins {
+       tx28_tsc2007_pins: tx28-tsc2007-pins@0 {
+               reg = <0>;
                fsl,pinmux-ids = <
                        MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */
                >;
@@ -643,7 +651,8 @@
        };
 
 
-       tx28_usbphy0_pins: tx28-usbphy0-pins {
+       tx28_usbphy0_pins: tx28-usbphy0-pins@0 {
+               reg = <0>;
                fsl,pinmux-ids = <
                        MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */
                        MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */
@@ -653,7 +662,8 @@
                fsl,pull-up = <MXS_PULL_DISABLE>;
        };
 
-       tx28_usbphy1_pins: tx28-usbphy1-pins {
+       tx28_usbphy1_pins: tx28-usbphy1-pins@0 {
+               reg = <0>;
                fsl,pinmux-ids = <
                        MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */
                        MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */