*/
#include <linux/bitmap.h>
+#include <linux/bitops.h>
#include <linux/bottom_half.h>
#include <linux/bug.h>
#include <linux/cache.h>
#include <asm/sigcontext.h>
#include <asm/sysreg.h>
#include <asm/traps.h>
+#include <asm/virt.h>
#define FPEXC_IOF (1 << 0)
#define FPEXC_DZF (1 << 1)
/* Maximum supported vector length across all CPUs (initially poisoned) */
int __ro_after_init sve_max_vl = SVE_VL_MIN;
+int __ro_after_init sve_max_virtualisable_vl = SVE_VL_MIN;
/* Set of available vector lengths, as vq_to_bit(vq): */
static __ro_after_init DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+/* Set of vector lengths present on at least one cpu: */
+static __ro_after_init DECLARE_BITMAP(sve_vq_partial_map, SVE_VQ_MAX);
static void __percpu *efi_sve_state;
#else /* ! CONFIG_ARM64_SVE */
/* Dummy declaration for code that will be optimised out: */
extern __ro_after_init DECLARE_BITMAP(sve_vq_map, SVE_VQ_MAX);
+extern __ro_after_init DECLARE_BITMAP(sve_vq_partial_map, SVE_VQ_MAX);
extern void __percpu *efi_sve_state;
#endif /* ! CONFIG_ARM64_SVE */
return sve_prctl_status(0);
}
-/*
- * Bitmap for temporary storage of the per-CPU set of supported vector lengths
- * during secondary boot.
- */
-static DECLARE_BITMAP(sve_secondary_vq_map, SVE_VQ_MAX);
-
static void sve_probe_vqs(DECLARE_BITMAP(map, SVE_VQ_MAX))
{
unsigned int vq, vl;
void __init sve_init_vq_map(void)
{
sve_probe_vqs(sve_vq_map);
+ bitmap_copy(sve_vq_partial_map, sve_vq_map, SVE_VQ_MAX);
}
/*
*/
void sve_update_vq_map(void)
{
- sve_probe_vqs(sve_secondary_vq_map);
- bitmap_and(sve_vq_map, sve_vq_map, sve_secondary_vq_map, SVE_VQ_MAX);
+ DECLARE_BITMAP(tmp_map, SVE_VQ_MAX);
+
+ sve_probe_vqs(tmp_map);
+ bitmap_and(sve_vq_map, sve_vq_map, tmp_map, SVE_VQ_MAX);
+ bitmap_or(sve_vq_partial_map, sve_vq_partial_map, tmp_map, SVE_VQ_MAX);
}
/*
*/
int sve_verify_vq_map(void)
{
- int ret = 0;
+ DECLARE_BITMAP(tmp_map, SVE_VQ_MAX);
+ unsigned long b;
- sve_probe_vqs(sve_secondary_vq_map);
- bitmap_andnot(sve_secondary_vq_map, sve_vq_map, sve_secondary_vq_map,
- SVE_VQ_MAX);
- if (!bitmap_empty(sve_secondary_vq_map, SVE_VQ_MAX)) {
+ sve_probe_vqs(tmp_map);
+
+ bitmap_complement(tmp_map, tmp_map, SVE_VQ_MAX);
+ if (bitmap_intersects(tmp_map, sve_vq_map, SVE_VQ_MAX)) {
pr_warn("SVE: cpu%d: Required vector length(s) missing\n",
smp_processor_id());
- ret = -EINVAL;
+ return -EINVAL;
}
- return ret;
+ if (!IS_ENABLED(CONFIG_KVM) || !is_hyp_mode_available())
+ return 0;
+
+ /*
+ * For KVM, it is necessary to ensure that this CPU doesn't
+ * support any vector length that guests may have probed as
+ * unsupported.
+ */
+
+ /* Recover the set of supported VQs: */
+ bitmap_complement(tmp_map, tmp_map, SVE_VQ_MAX);
+ /* Find VQs supported that are not globally supported: */
+ bitmap_andnot(tmp_map, tmp_map, sve_vq_map, SVE_VQ_MAX);
+
+ /* Find the lowest such VQ, if any: */
+ b = find_last_bit(tmp_map, SVE_VQ_MAX);
+ if (b >= SVE_VQ_MAX)
+ return 0; /* no mismatches */
+
+ /*
+ * Mismatches above sve_max_virtualisable_vl are fine, since
+ * no guest is allowed to configure ZCR_EL2.LEN to exceed this:
+ */
+ if (sve_vl_from_vq(bit_to_vq(b)) <= sve_max_virtualisable_vl) {
+ pr_warn("SVE: cpu%d: Unsupported vector length(s) present\n",
+ smp_processor_id());
+ return -EINVAL;
+ }
+
+ return 0;
}
static void __init sve_efi_setup(void)
void __init sve_setup(void)
{
u64 zcr;
+ DECLARE_BITMAP(tmp_map, SVE_VQ_MAX);
+ unsigned long b;
if (!system_supports_sve())
return;
*/
sve_default_vl = find_supported_vector_length(64);
+ bitmap_andnot(tmp_map, sve_vq_partial_map, sve_vq_map,
+ SVE_VQ_MAX);
+
+ b = find_last_bit(tmp_map, SVE_VQ_MAX);
+ if (b >= SVE_VQ_MAX)
+ /* No non-virtualisable VLs found */
+ sve_max_virtualisable_vl = SVE_VQ_MAX;
+ else if (WARN_ON(b == SVE_VQ_MAX - 1))
+ /* No virtualisable VLs? This is architecturally forbidden. */
+ sve_max_virtualisable_vl = SVE_VQ_MIN;
+ else /* b + 1 < SVE_VQ_MAX */
+ sve_max_virtualisable_vl = sve_vl_from_vq(bit_to_vq(b + 1));
+
+ if (sve_max_virtualisable_vl > sve_max_vl)
+ sve_max_virtualisable_vl = sve_max_vl;
+
pr_info("SVE: maximum available vector length %u bytes per vector\n",
sve_max_vl);
pr_info("SVE: default vector length %u bytes per vector\n",
sve_default_vl);
+ /* KVM decides whether to support mismatched systems. Just warn here: */
+ if (sve_max_virtualisable_vl < sve_max_vl)
+ pr_warn("SVE: unvirtualisable vector lengths present\n");
+
sve_efi_setup();
}