rtc: Group Kconfig entries by vendor

The RTC entries are mostly grouped by vendor. Move the few outliers in
place.
Also, change the one occurrence of 'nxp' to 'NXP' to make all NXP
entries consistent.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 2bcc861bda594224a7136d5d8fa3b454ad760ebb..583c1e6412e5bbda50a3d5f5244b752cf823e1d4 100644 (file)
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -390,16 +390,6 @@ config RTC_DRV_X1205
          This driver can also be built as a module. If so, the module
          will be called rtc-x1205.
 
-config RTC_DRV_PALMAS
-       tristate "TI Palmas RTC driver"
-       depends on MFD_PALMAS
-       help
-         If you say yes here you get support for the RTC of TI PALMA series PMIC
-         chips.
-
-         This driver can also be built as a module. If so, the module
-         will be called rtc-palma.
-
 config RTC_DRV_PCF2127
        tristate "NXP PCF2127"
        help
@@ -418,6 +408,14 @@ config RTC_DRV_PCF8523
          This driver can also be built as a module. If so, the module
          will be called rtc-pcf8523.
 
+config RTC_DRV_PCF85063
+       tristate "NXP PCF85063"
+       help
+         If you say yes here you get support for the PCF85063 RTC chip
+
+         This driver can also be built as a module. If so, the module
+         will be called rtc-pcf85063.
+
 config RTC_DRV_PCF8563
        tristate "Philips PCF8563/Epson RTC8564"
        help
@@ -428,14 +426,6 @@ config RTC_DRV_PCF8563
          This driver can also be built as a module. If so, the module
          will be called rtc-pcf8563.
 
-config RTC_DRV_PCF85063
-       tristate "nxp PCF85063"
-       help
-         If you say yes here you get support for the PCF85063 RTC chip
-
-         This driver can also be built as a module. If so, the module
-         will be called rtc-pcf85063.
-
 config RTC_DRV_PCF8583
        tristate "Philips PCF8583"
        help
@@ -500,6 +490,16 @@ config RTC_DRV_TWL4030
          This driver can also be built as a module. If so, the module
          will be called rtc-twl.
 
+config RTC_DRV_PALMAS
+       tristate "TI Palmas RTC driver"
+       depends on MFD_PALMAS
+       help
+         If you say yes here you get support for the RTC of TI PALMA series PMIC
+         chips.
+
+         This driver can also be built as a module. If so, the module
+         will be called rtc-palma.
+
 config RTC_DRV_TPS6586X
        tristate "TI TPS6586X RTC driver"
        depends on MFD_TPS6586X
@@ -690,15 +690,6 @@ config RTC_DRV_DS1390
          This driver can also be built as a module. If so, the module
          will be called rtc-ds1390.
 
-config RTC_DRV_MAX6902
-       tristate "Maxim MAX6902"
-       help
-         If you say yes here you will get support for the
-         Maxim MAX6902 SPI RTC chip.
-
-         This driver can also be built as a module. If so, the module
-         will be called rtc-max6902.
-
 config RTC_DRV_R9701
        tristate "Epson RTC-9701JE"
        help
@@ -708,6 +699,23 @@ config RTC_DRV_R9701
          This driver can also be built as a module. If so, the module
          will be called rtc-r9701.
 
+config RTC_DRV_RX4581
+       tristate "Epson RX-4581"
+       help
+         If you say yes here you will get support for the Epson RX-4581.
+
+         This driver can also be built as a module. If so the module
+         will be called rtc-rx4581.
+
+config RTC_DRV_RX6110
+       tristate "Epson RX-6110"
+       select REGMAP_SPI
+       help
+         If you say yes here you will get support for the Epson RX-6610.
+
+         This driver can also be built as a module. If so the module
+         will be called rtc-rx6110.
+
 config RTC_DRV_RS5C348
        tristate "Ricoh RS5C348A/B"
        help
@@ -717,6 +725,15 @@ config RTC_DRV_RS5C348
          This driver can also be built as a module. If so, the module
          will be called rtc-rs5c348.
 
+config RTC_DRV_MAX6902
+       tristate "Maxim MAX6902"
+       help
+         If you say yes here you will get support for the
+         Maxim MAX6902 SPI RTC chip.
+
+         This driver can also be built as a module. If so, the module
+         will be called rtc-max6902.
+
 config RTC_DRV_DS3234
        tristate "Maxim/Dallas DS3234"
        help
@@ -735,23 +752,6 @@ config RTC_DRV_PCF2123
          This driver can also be built as a module. If so, the module
          will be called rtc-pcf2123.
 
-config RTC_DRV_RX4581
-       tristate "Epson RX-4581"
-       help
-         If you say yes here you will get support for the Epson RX-4581.
-
-         This driver can also be built as a module. If so the module
-         will be called rtc-rx4581.
-
-config RTC_DRV_RX6110
-       tristate "Epson RX-6110"
-       select REGMAP_SPI
-       help
-         If you say yes here you will get support for the Epson RX-6610.
-
-         This driver can also be built as a module. If so the module
-         will be called rtc-rx6110.
-
 config RTC_DRV_MCP795
        tristate "Microchip MCP795"
        help