mtd: rawnand: fix indentation in Kconfig

Rules about Kconfig are simple but in the raw NAND directory indentation
is somehow archaic. Fix the indentation in the whole file.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 1488ad0a0199f17aaaeaff307b9ac99a74c989ba..2460fc19bfa972ee1ea3936b37696243e42082dd 100644 (file)
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -44,12 +44,12 @@ config MTD_NAND_DENALI
        tristate
 
 config MTD_NAND_DENALI_PCI
-        tristate "Support Denali NAND controller on Intel Moorestown"
+       tristate "Support Denali NAND controller on Intel Moorestown"
        select MTD_NAND_DENALI
        depends on PCI
-        help
-          Enable the driver for NAND flash on Intel Moorestown, using the
-          Denali NAND controller core.
+       help
+         Enable the driver for NAND flash on Intel Moorestown, using the
+         Denali NAND controller core.
 
 config MTD_NAND_DENALI_DT
        tristate "Support Denali NAND controller as a DT device"
@@ -80,7 +80,7 @@ config MTD_NAND_OMAP2
        depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
        depends on HAS_IOMEM
        help
-          Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4
+         Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4
          and Keystone platforms.
 
 config MTD_NAND_OMAP_BCH
@@ -138,7 +138,7 @@ config MTD_NAND_NDFC
        depends on 4xx
        select MTD_NAND_ECC_SMC
        help
-        NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
+         NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
 
 config MTD_NAND_S3C2410_CLKSTOP
        bool "Samsung S3C NAND IDLE clock stop"
@@ -170,40 +170,40 @@ config MTD_NAND_DISKONCHIP
          these devices.
 
 config MTD_NAND_DISKONCHIP_PROBE_ADVANCED
-        bool "Advanced detection options for DiskOnChip"
-        depends on MTD_NAND_DISKONCHIP
-        help
-          This option allows you to specify nonstandard address at which to
-          probe for a DiskOnChip, or to change the detection options.  You
-          are unlikely to need any of this unless you are using LinuxBIOS.
-          Say 'N'.
+       bool "Advanced detection options for DiskOnChip"
+       depends on MTD_NAND_DISKONCHIP
+       help
+         This option allows you to specify nonstandard address at which to
+         probe for a DiskOnChip, or to change the detection options.  You
+         are unlikely to need any of this unless you are using LinuxBIOS.
+         Say 'N'.
 
 config MTD_NAND_DISKONCHIP_PROBE_ADDRESS
-        hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED
-        depends on MTD_NAND_DISKONCHIP
-        default "0"
-        ---help---
-        By default, the probe for DiskOnChip devices will look for a
-        DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
-        This option allows you to specify a single address at which to probe
-        for the device, which is useful if you have other devices in that
-        range which get upset when they are probed.
-
-        (Note that on PowerPC, the normal probe will only check at
-        0xE4000000.)
-
-        Normally, you should leave this set to zero, to allow the probe at
-        the normal addresses.
+       hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+       depends on MTD_NAND_DISKONCHIP
+       default "0"
+       help
+         By default, the probe for DiskOnChip devices will look for a
+         DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+         This option allows you to specify a single address at which to probe
+         for the device, which is useful if you have other devices in that
+         range which get upset when they are probed.
+
+         (Note that on PowerPC, the normal probe will only check at
+         0xE4000000.)
+
+         Normally, you should leave this set to zero, to allow the probe at
+         the normal addresses.
 
 config MTD_NAND_DISKONCHIP_PROBE_HIGH
-        bool "Probe high addresses"
-        depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED
-        help
-          By default, the probe for DiskOnChip devices will look for a
-          DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
-          This option changes to make it probe between 0xFFFC8000 and
-          0xFFFEE000.  Unless you are using LinuxBIOS, this is unlikely to be
-          useful to you.  Say 'N'.
+       bool "Probe high addresses"
+       depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+       help
+         By default, the probe for DiskOnChip devices will look for a
+         DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+         This option changes to make it probe between 0xFFFC8000 and
+         0xFFFEE000.  Unless you are using LinuxBIOS, this is unlikely to be
+         useful to you.  Say 'N'.
 
 config MTD_NAND_DISKONCHIP_BBTWRITE
        bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP"
@@ -345,13 +345,13 @@ config MTD_NAND_NANDSIM
          MTD nand layer.
 
 config MTD_NAND_GPMI_NAND
-        tristate "GPMI NAND Flash Controller driver"
-        depends on MXS_DMA
-        help
-        Enables NAND Flash support for IMX23, IMX28 or IMX6.
-        The GPMI controller is very powerful, with the help of BCH
-        module, it can do the hardware ECC. The GPMI supports several
-        NAND flashs at the same time.
+       tristate "GPMI NAND Flash Controller driver"
+       depends on MXS_DMA
+       help
+         Enables NAND Flash support for IMX23, IMX28 or IMX6.
+         The GPMI controller is very powerful, with the help of BCH
+         module, it can do the hardware ECC. The GPMI supports several
+         NAND flashs at the same time.
 
 config MTD_NAND_BRCMNAND
        tristate "Broadcom STB NAND controller"
@@ -459,9 +459,9 @@ config MTD_NAND_SH_FLCTL
          for NAND Flash using FLCTL.
 
 config MTD_NAND_DAVINCI
-        tristate "Support NAND on DaVinci/Keystone SoC"
-        depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF)
-        help
+       tristate "Support NAND on DaVinci/Keystone SoC"
+       depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF)
+       help
          Enable the driver for NAND flash chips on Texas Instruments
          DaVinci/Keystone processors.
 
@@ -489,7 +489,7 @@ config MTD_NAND_JZ4740
        tristate "Support for JZ4740 SoC NAND controller"
        depends on MACH_JZ4740
        help
-               Enables support for NAND Flash on JZ4740 SoC based boards.
+         Enables support for NAND Flash on JZ4740 SoC based boards.
 
 config MTD_NAND_JZ4780
        tristate "Support for NAND on JZ4780 SoC"