This backport patch inserted suspend/resume callbacks
for the wrong PHY driver.
The fixed patch is needed for Huawei AP5030DN
to initialize its second PHY.
Refresh all affected patch with make target/linux/refresh.
Fixes: 06cdc07f8cc7 ("ath79: add support for Huawei AP5030DN")
Signed-off-by: Marco von Rosenberg <marcovr@selfnet.de>
Link: https://github.com/openwrt/openwrt/pull/17312
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
return;
val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);
-@@ -1021,7 +1022,7 @@ static struct phy_driver broadcom_driver
+@@ -1019,7 +1020,7 @@ static struct phy_driver broadcom_driver
.link_change_notify = bcm54xx_link_change_notify,
}, {
.phy_id = PHY_ID_BCM54210E,
.name = "Broadcom BCM54210E",
/* PHY_GBIT_FEATURES */
.flags = PHY_ALWAYS_CALL_SUSPEND,
-@@ -1039,6 +1040,13 @@ static struct phy_driver broadcom_driver
+@@ -1037,6 +1038,13 @@ static struct phy_driver broadcom_driver
.set_wol = bcm54xx_phy_set_wol,
.led_brightness_set = bcm_phy_led_brightness_set,
}, {
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
-@@ -1052,8 +1052,14 @@ static struct phy_driver broadcom_driver
+@@ -1050,8 +1050,14 @@ static struct phy_driver broadcom_driver
.phy_id_mask = 0xffffffff,
.name = "Broadcom BCM54213PE",
/* PHY_GBIT_FEATURES */
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
-@@ -1001,6 +1001,8 @@ static struct phy_driver broadcom_driver
- .config_intr = bcm_phy_config_intr,
+@@ -1061,6 +1061,8 @@ static struct phy_driver broadcom_driver
.handle_interrupt = bcm_phy_handle_interrupt,
.link_change_notify = bcm54xx_link_change_notify,
+ .led_brightness_set = bcm_phy_led_brightness_set,
+ .suspend = bcm54xx_suspend,
+ .resume = bcm54xx_resume,
}, {
- .phy_id = PHY_ID_BCM5421,
+ .phy_id = PHY_ID_BCM54616S,
.phy_id_mask = 0xfffffff0,