ARM: zynq: DT: Fix Ethernet phy modes

The used PHYs should be qualified as 'rgmii-id' instead of just 'rgmii'.
For the Zed board this seems to make a difference between working and
broken Ethernet.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index b29e0f97e764d38d768e548b917ac57ef035708e..1a50f9f8d29562075c2093f0a4b19ad663f64cd0 100644 (file)
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -44,7 +44,7 @@
 
 &gem0 {
        status = "okay";
-       phy-mode = "rgmii";
+       phy-mode = "rgmii-id";
 };
 
 &i2c0 {

diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 4cc9913078cd6427ab69d206a21ba8d44c5c431d..3d9cb023e1582e6acca4bcc19c8afeb7d921ca6c 100644 (file)
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -32,7 +32,7 @@
 
 &gem0 {
        status = "okay";
-       phy-mode = "rgmii";
+       phy-mode = "rgmii-id";
 };
 
 &i2c0 {

diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
index 82d7ef1a9a9c6c5be0298dc38652d8dfea8b4c9c..42deb1b7dbc875e4aef8a28e79fbe0ebe22bad8f 100644 (file)
--- a/arch/arm/boot/dts/zynq-zed.dts
+++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -32,7 +32,7 @@
 
 &gem0 {
        status = "okay";
-       phy-mode = "rgmii";
+       phy-mode = "rgmii-id";
 };
 
 &sdhci0 {