*
*/
+#include <drm/drm_scdc_helper.h>
#include "i915_drv.h"
#include "intel_drv.h"
return connector;
}
+static int modeset_pipe(struct drm_crtc *crtc,
+ struct drm_modeset_acquire_ctx *ctx)
+{
+ struct drm_atomic_state *state;
+ struct drm_crtc_state *crtc_state;
+ int ret;
+
+ state = drm_atomic_state_alloc(crtc->dev);
+ if (!state)
+ return -ENOMEM;
+
+ state->acquire_ctx = ctx;
+
+ crtc_state = drm_atomic_get_crtc_state(state, crtc);
+ if (IS_ERR(crtc_state)) {
+ ret = PTR_ERR(crtc_state);
+ goto out;
+ }
+
+ crtc_state->mode_changed = true;
+
+ ret = drm_atomic_add_affected_connectors(state, crtc);
+ if (ret)
+ goto out;
+
+ ret = drm_atomic_add_affected_planes(state, crtc);
+ if (ret)
+ goto out;
+
+ ret = drm_atomic_commit(state);
+ if (ret)
+ goto out;
+
+ return 0;
+
+ out:
+ drm_atomic_state_put(state);
+
+ return ret;
+}
+
+static int intel_hdmi_reset_link(struct intel_encoder *encoder,
+ struct drm_modeset_acquire_ctx *ctx)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_hdmi *hdmi = enc_to_intel_hdmi(&encoder->base);
+ struct intel_connector *connector = hdmi->attached_connector;
+ struct i2c_adapter *adapter =
+ intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus);
+ struct drm_connector_state *conn_state;
+ struct intel_crtc_state *crtc_state;
+ struct intel_crtc *crtc;
+ u8 config;
+ int ret;
+
+ if (!connector || connector->base.status != connector_status_connected)
+ return 0;
+
+ ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex,
+ ctx);
+ if (ret)
+ return ret;
+
+ conn_state = connector->base.state;
+
+ crtc = to_intel_crtc(conn_state->crtc);
+ if (!crtc)
+ return 0;
+
+ ret = drm_modeset_lock(&crtc->base.mutex, ctx);
+ if (ret)
+ return ret;
+
+ crtc_state = to_intel_crtc_state(crtc->base.state);
+
+ WARN_ON(!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI));
+
+ if (!crtc_state->base.active)
+ return 0;
+
+ if (!crtc_state->hdmi_high_tmds_clock_ratio &&
+ !crtc_state->hdmi_scrambling)
+ return 0;
+
+ if (conn_state->commit &&
+ !try_wait_for_completion(&conn_state->commit->hw_done))
+ return 0;
+
+ ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config);
+ if (ret < 0) {
+ DRM_ERROR("Failed to read TMDS config: %d\n", ret);
+ return 0;
+ }
+
+ if (!!(config & SCDC_TMDS_BIT_CLOCK_RATIO_BY_40) ==
+ crtc_state->hdmi_high_tmds_clock_ratio &&
+ !!(config & SCDC_SCRAMBLING_ENABLE) ==
+ crtc_state->hdmi_scrambling)
+ return 0;
+
+ /*
+ * HDMI 2.0 says that one should not send scrambled data
+ * prior to configuring the sink scrambling, and that
+ * TMDS clock/data transmission should be suspended when
+ * changing the TMDS clock rate in the sink. So let's
+ * just do a full modeset here, even though some sinks
+ * would be perfectly happy if were to just reconfigure
+ * the SCDC settings on the fly.
+ */
+ return modeset_pipe(&crtc->base, ctx);
+}
+
+static bool intel_ddi_hotplug(struct intel_encoder *encoder,
+ struct intel_connector *connector)
+{
+ struct drm_modeset_acquire_ctx ctx;
+ bool changed;
+ int ret;
+
+ changed = intel_encoder_hotplug(encoder, connector);
+
+ drm_modeset_acquire_init(&ctx, 0);
+
+ for (;;) {
+ ret = intel_hdmi_reset_link(encoder, &ctx);
+
+ if (ret == -EDEADLK) {
+ drm_modeset_backoff(&ctx);
+ continue;
+ }
+
+ break;
+ }
+
+ drm_modeset_drop_locks(&ctx);
+ drm_modeset_acquire_fini(&ctx);
+ WARN(ret, "Acquiring modeset locks failed with %i\n", ret);
+
+ return changed;
+}
+
static struct intel_connector *
intel_ddi_init_hdmi_connector(struct intel_digital_port *intel_dig_port)
{
drm_encoder_init(&dev_priv->drm, encoder, &intel_ddi_funcs,
DRM_MODE_ENCODER_TMDS, "DDI %c", port_name(port));
+ if (init_hdmi)
+ intel_encoder->hotplug = intel_ddi_hotplug;
+ else
+ intel_encoder->hotplug = intel_encoder_hotplug;
intel_encoder->compute_output_type = intel_ddi_compute_output_type;
intel_encoder->compute_config = intel_ddi_compute_config;
intel_encoder->enable = intel_enable_ddi;
intel_runtime_pm_put(dev_priv);
}
-static bool intel_hpd_irq_event(struct drm_device *dev,
- struct drm_connector *connector)
+bool intel_encoder_hotplug(struct intel_encoder *encoder,
+ struct intel_connector *connector)
{
+ struct drm_device *dev = connector->base.dev;
enum drm_connector_status old_status;
WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
- old_status = connector->status;
+ old_status = connector->base.status;
- connector->status = drm_helper_probe_detect(connector, NULL, false);
+ connector->base.status =
+ drm_helper_probe_detect(&connector->base, NULL, false);
- if (old_status == connector->status)
+ if (old_status == connector->base.status)
return false;
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
- connector->base.id,
- connector->name,
+ connector->base.base.id,
+ connector->base.name,
drm_get_connector_status_name(old_status),
- drm_get_connector_status_name(connector->status));
+ drm_get_connector_status_name(connector->base.status));
return true;
}
if (hpd_event_bits & (1 << intel_encoder->hpd_pin)) {
DRM_DEBUG_KMS("Connector %s (pin %i) received hotplug event.\n",
connector->name, intel_encoder->hpd_pin);
- if (intel_encoder->hot_plug)
- intel_encoder->hot_plug(intel_encoder);
- if (intel_hpd_irq_event(dev, connector))
- changed = true;
+
+ changed |= intel_encoder->hotplug(intel_encoder,
+ intel_connector);
}
}
drm_connector_list_iter_end(&conn_iter);