<![CDATA[
struct snd_rawmidi *rmidi;
snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port, info_flags,
- irq, irq_flags, &rmidi);
+ irq, &rmidi);
]]>
</programlisting>
</informalexample>
by itself to start processing the output stream in the irq handler.
</para>
+ <para>
+ If the MPU-401 interface shares its interrupt with the other logical
+ devices on the card, set <constant>MPU401_INFO_IRQ_HOOK</constant>
+ (see <link linkend="midi-interface-interrupt-handler"><citetitle>
+ below</citetitle></link>).
+ </para>
+
<para>
Usually, the port address corresponds to the command port and
port + 1 corresponds to the data port. If not, you may change
</para>
<para>
- The 6th argument specifies the irq number for UART. If the irq
- is already allocated, pass 0 to the 7th argument
- (<parameter>irq_flags</parameter>). Otherwise, pass the flags
- for irq allocation
- (<constant>SA_XXX</constant> bits) to it, and the irq will be
- reserved by the mpu401-uart layer. If the card doesn't generate
- UART interrupts, pass -1 as the irq number. Then a timer
- interrupt will be invoked for polling.
+ The 6th argument specifies the ISA irq number that will be
+ allocated. If no interrupt is to be allocated (because your
+ code is already allocating a shared interrupt, or because the
+ device does not use interrupts), pass -1 instead.
+ For a MPU-401 device without an interrupt, a polling timer
+ will be used instead.
</para>
</section>
<title>Interrupt Handler</title>
<para>
When the interrupt is allocated in
- <function>snd_mpu401_uart_new()</function>, the private
- interrupt handler is used, hence you don't have anything else to do
- than creating the mpu401 stuff. Otherwise, you have to call
- <function>snd_mpu401_uart_interrupt()</function> explicitly when
- a UART interrupt is invoked and checked in your own interrupt
- handler.
+ <function>snd_mpu401_uart_new()</function>, an exclusive ISA
+ interrupt handler is automatically used, hence you don't have
+ anything else to do than creating the mpu401 stuff. Otherwise, you
+ have to set <constant>MPU401_INFO_IRQ_HOOK</constant>, and call
+ <function>snd_mpu401_uart_interrupt()</function> explicitly from your
+ own interrupt handler when it has determined that a UART interrupt
+ has occurred.
</para>
<para>
#define MPU401_INFO_INTEGRATED (1 << 2) /* integrated h/w port */
#define MPU401_INFO_MMIO (1 << 3) /* MMIO access */
#define MPU401_INFO_TX_IRQ (1 << 4) /* independent TX irq */
+#define MPU401_INFO_IRQ_HOOK (1 << 5) /* mpu401 irq handler is called
+ from driver irq handler */
#define MPU401_INFO_NO_ACK (1 << 6) /* No ACK cmd needed */
+#define MPU401_INFO_USE_TIMER (1 << 15) /* internal */
#define MPU401_MODE_BIT_INPUT 0
#define MPU401_MODE_BIT_OUTPUT 1
unsigned long port; /* base port of MPU-401 chip */
unsigned long cport; /* port + 1 (usually) */
struct resource *res; /* port resource */
- int irq; /* IRQ number of MPU-401 chip (-1 = poll) */
- int irq_flags;
+ int irq; /* IRQ number of MPU-401 chip */
unsigned long mode; /* MPU401_MODE_XXXX */
int timer_invoked;
unsigned long port,
unsigned int info_flags,
int irq,
- int irq_flags,
struct snd_rawmidi ** rrawmidi);
#endif /* __SOUND_MPU401_H */
}
err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port[dev], 0,
- irq[dev], irq[dev] >= 0 ? IRQF_DISABLED : 0,
- NULL);
+ irq[dev], NULL);
if (err < 0) {
printk(KERN_ERR "MPU401 not detected at 0x%lx\n", port[dev]);
goto _err;
* Routines for control of MPU-401 in UART mode
*
* MPU-401 supports UART mode which is not capable generate transmit
- * interrupts thus output is done via polling. Also, if irq < 0, then
+ * interrupts thus output is done via polling. Without interrupt,
* input is done also via polling. Do not expect good performance.
*
*
/* first time - flush FIFO */
while (max-- > 0)
mpu->read(mpu, MPU401D(mpu));
- if (mpu->irq < 0)
+ if (mpu->info_flags & MPU401_INFO_USE_TIMER)
snd_mpu401_uart_add_timer(mpu, 1);
}
snd_mpu401_uart_input_read(mpu);
spin_unlock_irqrestore(&mpu->input_lock, flags);
} else {
- if (mpu->irq < 0)
+ if (mpu->info_flags & MPU401_INFO_USE_TIMER)
snd_mpu401_uart_remove_timer(mpu, 1);
clear_bit(MPU401_MODE_BIT_INPUT_TRIGGER, &mpu->mode);
}
static void snd_mpu401_uart_free(struct snd_rawmidi *rmidi)
{
struct snd_mpu401 *mpu = rmidi->private_data;
- if (mpu->irq_flags && mpu->irq >= 0)
+ if (mpu->irq >= 0)
free_irq(mpu->irq, (void *) mpu);
release_and_free_resource(mpu->res);
kfree(mpu);
* @hardware: the hardware type, MPU401_HW_XXXX
* @port: the base address of MPU401 port
* @info_flags: bitflags MPU401_INFO_XXX
- * @irq: the irq number, -1 if no interrupt for mpu
- * @irq_flags: the irq request flags (SA_XXX), 0 if irq was already reserved.
+ * @irq: the ISA irq number, -1 if not to be allocated
* @rrawmidi: the pointer to store the new rawmidi instance
*
* Creates a new MPU-401 instance.
unsigned short hardware,
unsigned long port,
unsigned int info_flags,
- int irq, int irq_flags,
+ int irq,
struct snd_rawmidi ** rrawmidi)
{
struct snd_mpu401 *mpu;
mpu->cport = port + 2;
else
mpu->cport = port + 1;
- if (irq >= 0 && irq_flags) {
- if (request_irq(irq, snd_mpu401_uart_interrupt, irq_flags,
+ if (irq >= 0) {
+ if (request_irq(irq, snd_mpu401_uart_interrupt, IRQF_DISABLED,
"MPU401 UART", (void *) mpu)) {
snd_printk(KERN_ERR "mpu401_uart: "
"unable to grab IRQ %d\n", irq);
return -EBUSY;
}
}
+ if (irq < 0 && !(info_flags & MPU401_INFO_IRQ_HOOK))
+ info_flags |= MPU401_INFO_USE_TIMER;
mpu->info_flags = info_flags;
mpu->irq = irq;
- mpu->irq_flags = irq_flags;
if (card->shortname[0])
snprintf(rmidi->name, sizeof(rmidi->name), "%s MIDI",
card->shortname);
if (mpu_port[dev] > 0) {
if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- mpu_port[dev], 0, mpu_irq[dev], IRQF_DISABLED,
+ mpu_port[dev], 0, mpu_irq[dev],
NULL) < 0)
printk(KERN_ERR PFX "no MPU-401 device at 0x%lx.\n", mpu_port[dev]);
}
mpu_type,
mpu_port[dev], 0,
mpu_irq[dev],
- mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0,
NULL) < 0)
snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx\n", mpu_port[dev]);
}
if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
if (snd_mpu401_uart_new(card, 0, MPU401_HW_AZT2320,
mpu_port[dev], 0,
- mpu_irq[dev], IRQF_DISABLED,
- NULL) < 0)
+ mpu_irq[dev], NULL) < 0)
snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx\n", mpu_port[dev]);
}
if (mpuport[dev] != SNDRV_AUTO_PORT) {
if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
mpuport[dev], 0, mpuirq[dev],
- IRQF_DISABLED, NULL) < 0)
+ NULL) < 0)
printk(KERN_ERR PFX "no MPU-401 device at 0x%lx.\n",
mpuport[dev]);
}
mpu_irq[n] = -1;
if (snd_mpu401_uart_new(card, 0, MPU401_HW_CS4232,
mpu_port[n], 0, mpu_irq[n],
- mpu_irq[n] >= 0 ? IRQF_DISABLED : 0,
NULL) < 0)
dev_warn(dev, "MPU401 not detected\n");
}
mpu_irq[dev] = -1;
if (snd_mpu401_uart_new(card, 0, MPU401_HW_CS4232,
mpu_port[dev], 0,
- mpu_irq[dev],
- mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0, NULL) < 0)
+ mpu_irq[dev], NULL) < 0)
printk(KERN_WARNING IDENT ": MPU401 not detected\n");
}
chip->mpu_port > 0) {
error = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688,
chip->mpu_port, 0,
- mpu_irq[n], IRQF_DISABLED, NULL);
+ mpu_irq[n], NULL);
if (error < 0)
return error;
}
if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
err = snd_mpu401_uart_new(card, 0, MPU401_HW_ES18XX,
- mpu_port[dev], 0,
- irq[dev], 0, &chip->rmidi);
+ mpu_port[dev], MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi);
if (err < 0)
return err;
}
if (mpu_port[n] >= 0) {
err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- mpu_port[n], 0, mpu_irq[n],
- IRQF_DISABLED, NULL);
+ mpu_port[n], 0, mpu_irq[n], NULL);
if (err < 0)
goto error;
}
if (es1688->mpu_port >= 0x300) {
error = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688,
- es1688->mpu_port, 0,
- mpu_irq[n], IRQF_DISABLED, NULL);
+ es1688->mpu_port, 0, mpu_irq[n], NULL);
if (error < 0)
goto out;
}
mpu_io[0],
MPU401_MODE_INPUT |
MPU401_MODE_OUTPUT,
- mpu_irq[0], IRQF_DISABLED,
+ mpu_irq[0],
&chip->rmidi);
if (err < 0) {
printk(KERN_ERR LOGNAME
}
if (midi_port[dev] >= 0x300 && midi_port[dev] < 0x340) {
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_OPL3SA2,
- midi_port[dev], 0,
- xirq, 0, &chip->rmidi)) < 0)
+ midi_port[dev],
+ MPU401_INFO_IRQ_HOOK, -1,
+ &chip->rmidi)) < 0)
return err;
}
sprintf(card->longname, "%s at 0x%lx, irq %d, dma %d",
rmidi = NULL;
else {
error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- mpu_port, 0, miro->mpu_irq, IRQF_DISABLED,
- &rmidi);
+ mpu_port, 0, miro->mpu_irq, &rmidi);
if (error < 0)
snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n",
mpu_port);
rmidi = NULL;
else {
error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- mpu_port, 0, mpu_irq, IRQF_DISABLED, &rmidi);
+ mpu_port, 0, mpu_irq, &rmidi);
if (error)
snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n",
mpu_port);
MPU401_HW_MPU401,
mpu_port[dev], 0,
mpu_irq[dev],
- mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0,
NULL) < 0)
snd_printk(KERN_ERR "no MPU-401 device at 0x%lx\n",
mpu_port[dev]);
if (chip->mpu_port > 0 && chip->mpu_port != SNDRV_AUTO_PORT) {
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_SB,
- chip->mpu_port, 0,
- xirq, 0, &chip->rmidi)) < 0)
+ chip->mpu_port,
+ MPU401_INFO_IRQ_HOOK, -1,
+ &chip->rmidi)) < 0)
return err;
chip->rmidi_callback = snd_mpu401_uart_interrupt;
}
if (snd_mpu401_uart_new(card, 0,
MPU401_HW_MPU401,
mpu_port[dev], 0,
- mpu_irq[dev], IRQF_DISABLED,
- NULL) < 0)
+ mpu_irq[dev], NULL) < 0)
snd_printk(KERN_ERR "no MPU-401 device at 0x%lx ?\n",
mpu_port[dev]);
}
int err;
err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port,
- MPU401_INFO_INTEGRATED, irq, IRQF_DISABLED,
- &rawmidi);
+ MPU401_INFO_INTEGRATED, irq, &rawmidi);
if (err == 0) {
struct snd_mpu401 *mpu = rawmidi->private_data;
mpu->open_input = mpu401_open;
if (cs4232_mpu_port[dev] > 0 && cs4232_mpu_port[dev] != SNDRV_AUTO_PORT) {
err = snd_mpu401_uart_new(card, midi_dev, MPU401_HW_CS4232,
cs4232_mpu_port[dev], 0,
- cs4232_mpu_irq[dev], IRQF_DISABLED,
- NULL);
+ cs4232_mpu_irq[dev], NULL);
if (err < 0) {
snd_printk (KERN_ERR "can't allocate CS4232 MPU-401 device\n");
return err;
if ((err = snd_mpu401_uart_new( card, 0, MPU401_HW_ALS4000,
iobase + ALS4K_IOB_30_MIDI_DATA,
- MPU401_INFO_INTEGRATED,
- pci->irq, 0, &chip->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi)) < 0) {
printk(KERN_ERR "als4000: no MPU-401 device at 0x%lx?\n",
iobase + ALS4K_IOB_30_MIDI_DATA);
goto out_err;
#ifdef VORTEX_MPU401_LEGACY
if ((temp =
snd_mpu401_uart_new(vortex->card, 0, MPU401_HW_MPU401, 0x330,
- 0, 0, 0, &rmidi)) != 0) {
+ MPU401_INFO_IRQ_HOOK, -1, &rmidi)) != 0) {
hwwrite(vortex->mmio, VORTEX_CTRL,
(hwread(vortex->mmio, VORTEX_CTRL) &
~CTRL_MIDI_PORT) & ~CTRL_MIDI_EN);
port = (unsigned long)(vortex->mmio + VORTEX_MIDI_DATA);
if ((temp =
snd_mpu401_uart_new(vortex->card, 0, MPU401_HW_AUREAL, port,
- MPU401_INFO_INTEGRATED | MPU401_INFO_MMIO,
- 0, 0, &rmidi)) != 0) {
+ MPU401_INFO_INTEGRATED | MPU401_INFO_MMIO |
+ MPU401_INFO_IRQ_HOOK, -1, &rmidi)) != 0) {
hwwrite(vortex->mmio, VORTEX_CTRL,
(hwread(vortex->mmio, VORTEX_CTRL) &
~CTRL_MIDI_PORT) & ~CTRL_MIDI_EN);
since our hardware ought to be similar, thus use same ID. */
err = snd_mpu401_uart_new(
card, 0,
- MPU401_HW_AZT2320, chip->mpu_io, MPU401_INFO_INTEGRATED,
- pci->irq, 0, &chip->rmidi
+ MPU401_HW_AZT2320, chip->mpu_io,
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi
);
if (err < 0) {
snd_printk(KERN_ERR "azf3328: no MPU-401 device at 0x%lx?\n",
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_CMIPCI,
iomidi,
(integrated_midi ?
- MPU401_INFO_INTEGRATED : 0),
- cm->irq, 0, &cm->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED : 0) |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &cm->rmidi)) < 0) {
printk(KERN_ERR "cmipci: no UART401 device at 0x%lx\n", iomidi);
}
}
}
}
if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- chip->mpu_port, MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi) < 0) {
+ chip->mpu_port,
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi) < 0) {
printk(KERN_ERR "es1938: unable to initialize MPU-401\n");
} else {
// this line is vital for MIDI interrupt handling on ess-solo1
if (enable_mpu[dev]) {
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
chip->io_port + ESM_MPU401_PORT,
- MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi)) < 0) {
printk(KERN_WARNING "es1968: skipping MPU-401 MIDI support..\n");
}
}
}
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_FM801,
FM801_REG(chip, MPU401_DATA),
- MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi)) < 0) {
snd_card_free(card);
return err;
}
if (!c->no_mpu401) {
err = snd_mpu401_uart_new(card, 0, MPU401_HW_ICE1712,
ICEREG(ice, MPU1_CTRL),
- (c->mpu401_1_info_flags | MPU401_INFO_INTEGRATED),
- ice->irq, 0, &ice->rmidi[0]);
+ c->mpu401_1_info_flags |
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &ice->rmidi[0]);
if (err < 0) {
snd_card_free(card);
return err;
/* 2nd port used */
err = snd_mpu401_uart_new(card, 1, MPU401_HW_ICE1712,
ICEREG(ice, MPU2_CTRL),
- (c->mpu401_2_info_flags | MPU401_INFO_INTEGRATED),
- ice->irq, 0, &ice->rmidi[1]);
+ c->mpu401_2_info_flags |
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &ice->rmidi[1]);
if (err < 0) {
snd_card_free(card);
/* TODO enable MIDI IRQ and I/O */
err = snd_mpu401_uart_new(chip->card, 0, MPU401_HW_MPU401,
chip->iobase + MPU401_DATA_PORT,
- MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi);
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi);
if (err < 0)
printk(KERN_WARNING "maestro3: no MIDI support.\n");
#endif
goto err_card;
if (chip->model.device_config & (MIDI_OUTPUT | MIDI_INPUT)) {
- unsigned int info_flags = MPU401_INFO_INTEGRATED;
+ unsigned int info_flags =
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK;
if (chip->model.device_config & MIDI_OUTPUT)
info_flags |= MPU401_INFO_OUTPUT;
if (chip->model.device_config & MIDI_INPUT)
info_flags |= MPU401_INFO_INPUT;
err = snd_mpu401_uart_new(card, 0, MPU401_HW_CMIPCI,
chip->addr + OXYGEN_MPU401,
- info_flags, 0, 0,
- &chip->midi);
+ info_flags, -1, &chip->midi);
if (err < 0)
goto err_card;
}
val = mpu_port[dev];
pci_write_config_word(chip->pci, PCI_EXT_MPU_Base, val);
err = snd_mpu401_uart_new(card, 0, MPU401_HW_RIPTIDE,
- val, 0, chip->irq, 0,
+ val, MPU401_INFO_IRQ_HOOK, -1,
&chip->rmidi);
if (err < 0)
snd_printk(KERN_WARNING
return err;
}
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_SONICVIBES,
- sonic->midi_port, MPU401_INFO_INTEGRATED,
- sonic->irq, 0,
- &midi_uart)) < 0) {
+ sonic->midi_port,
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &midi_uart)) < 0) {
snd_card_free(card);
return err;
}
if (trident->device != TRIDENT_DEVICE_ID_SI7018 &&
(err = snd_mpu401_uart_new(card, 0, MPU401_HW_TRID4DWAVE,
trident->midi_port,
- MPU401_INFO_INTEGRATED,
- trident->irq, 0, &trident->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &trident->rmidi)) < 0) {
snd_card_free(card);
return err;
}
pci_write_config_byte(chip->pci, VIA_PNP_CONTROL, legacy_cfg);
if (chip->mpu_res) {
if (snd_mpu401_uart_new(chip->card, 0, MPU401_HW_VIA686A,
- mpu_port, MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi) < 0) {
+ mpu_port, MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK, -1,
+ &chip->rmidi) < 0) {
printk(KERN_WARNING "unable to initialize MPU-401"
" at 0x%lx, skipping\n", mpu_port);
legacy &= ~VIA_FUNC_ENABLE_MIDI;
if (chip->mpu_res) {
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_YMFPCI,
mpu_port[dev],
- MPU401_INFO_INTEGRATED,
- pci->irq, 0, &chip->rawmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rawmidi)) < 0) {
printk(KERN_WARNING "ymfpci: cannot initialize MPU401 at 0x%lx, skipping...\n", mpu_port[dev]);
legacy_ctrl &= ~YMFPCI_LEGACY_MIEN; /* disable MPU401 irq */
pci_write_config_word(pci, PCIR_DSXG_LEGACY, legacy_ctrl);
projects / openwrt / staging / blogic.git / commitdiff