staging: comedi: s626: remove MC_ENABLE macro

This macro relies on a local variable having a specific name. Replace
it with a new helper function, s626_mc_enable().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 0a9638bcbcda65dc64ca22ac38806bef395d05d1..a6450ffb7efee2de6f88a25531d04ec29c61ed92 100644 (file)
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -137,9 +137,18 @@ struct enc_private {
 /*  Translation table to map IntSrc into equivalent RDMISC2 event flag  bits. */
 /* static const uint16_t EventBits[][4] = { EVBITS(0), EVBITS(1), EVBITS(2), EVBITS(3), EVBITS(4), EVBITS(5) }; */
 
-/*  enab/disable a function or test status bit(s) that are accessed */
-/*  through Main Control Registers 1 or 2. */
-#define MC_ENABLE(REGADRS, CTRLWORD)   writel(((uint32_t)(CTRLWORD) << 16) | (uint32_t)(CTRLWORD), devpriv->base_addr+(REGADRS))
+/*
+ * Enable/disable a function or test status bit(s) that are accessed
+ * through Main Control Registers 1 or 2.
+ */
+static void s626_mc_enable(struct comedi_device *dev,
+                          unsigned int cmd, unsigned int reg)
+{
+       struct s626_private *devpriv = dev->private;
+       unsigned int val = (cmd << 16) | cmd;
+
+       writel(val, devpriv->base_addr + reg);
+}
 
 #define MC_DISABLE(REGADRS, CTRLWORD)  writel((uint32_t)(CTRLWORD) << 16 , devpriv->base_addr+(REGADRS))
 
@@ -177,8 +186,8 @@ static void DEBItransfer(struct comedi_device *dev)
 {
        struct s626_private *devpriv = dev->private;
 
-       /*  Initiate upload of shadow RAM to DEBI control register. */
-       MC_ENABLE(P_MC2, MC2_UPLD_DEBI);
+       /* Initiate upload of shadow RAM to DEBI control register */
+       s626_mc_enable(dev, MC2_UPLD_DEBI, P_MC2);
 
        /*  Wait for completion of upload from shadow RAM to DEBI control */
        /*  register. */
@@ -255,10 +264,11 @@ static uint32_t I2Chandshake(struct comedi_device *dev, uint32_t val)
        /*  Write I2C command to I2C Transfer Control shadow register. */
        WR7146(P_I2CCTRL, val);
 
-       /*  Upload I2C shadow registers into working registers and wait for */
-       /*  upload confirmation. */
-
-       MC_ENABLE(P_MC2, MC2_UPLD_IIC);
+       /*
+        * Upload I2C shadow registers into working registers and
+        * wait for upload confirmation.
+        */
+       s626_mc_enable(dev, MC2_UPLD_IIC, P_MC2);
        while (!MC_TEST(P_MC2, MC2_UPLD_IIC))
                ;
 
@@ -348,12 +358,13 @@ static void SendDAC(struct comedi_device *dev, uint32_t val)
        /* WR7146( (uint32_t)devpriv->pDacWBuf, val ); */
        *devpriv->pDacWBuf = val;
 
-       /* enab the output DMA transfer.  This will cause the DMAC to copy
-        * the DAC's data value to A2's output FIFO.  The DMA transfer will
+       /*
+        * Enable the output DMA transfer. This will cause the DMAC to copy
+        * the DAC's data value to A2's output FIFO. The DMA transfer will
         * then immediately terminate because the protection address is
         * reached upon transfer of the first DWORD value.
         */
-       MC_ENABLE(P_MC1, MC1_A2OUT);
+       s626_mc_enable(dev, MC1_A2OUT, P_MC1);
 
        /*  While the DMA transfer is executing ... */
 
@@ -675,15 +686,15 @@ static void handle_dio_interrupt(struct comedi_device *dev,
                if ((irqbit >> (cmd->start_arg - (16 * group))) == 1 &&
                    cmd->start_src == TRIG_EXT) {
                        /* Start executing the RPS program */
-                       MC_ENABLE(P_MC1, MC1_ERPS1);
+                       s626_mc_enable(dev, MC1_ERPS1, P_MC1);
 
                        if (cmd->scan_begin_src == TRIG_EXT)
                                s626_dio_set_irq(dev, cmd->scan_begin_arg);
                }
                if ((irqbit >> (cmd->scan_begin_arg - (16 * group))) == 1 &&
                    cmd->scan_begin_src == TRIG_EXT) {
-                       /* Trigger ADC scan loop start (set RPS Signal 0) */
-                       MC_ENABLE(P_MC2, MC2_ADC_RPS);
+                       /* Trigger ADC scan loop start */
+                       s626_mc_enable(dev, MC2_ADC_RPS, P_MC2);
 
                        if (cmd->convert_src == TRIG_EXT) {
                                devpriv->ai_convert_count = cmd->chanlist_len;
@@ -700,8 +711,8 @@ static void handle_dio_interrupt(struct comedi_device *dev,
                }
                if ((irqbit >> (cmd->convert_arg - (16 * group))) == 1 &&
                    cmd->convert_src == TRIG_EXT) {
-                       /* Trigger ADC scan loop start (set RPS Signal 0) */
-                       MC_ENABLE(P_MC2, MC2_ADC_RPS);
+                       /* Trigger ADC scan loop start */
+                       s626_mc_enable(dev, MC2_ADC_RPS, P_MC2);
 
                        devpriv->ai_convert_count--;
                        if (devpriv->ai_convert_count > 0)
@@ -777,8 +788,8 @@ static void check_counter_interrupts(struct comedi_device *dev)
                                k->SetEnable(dev, k, CLKENAB_INDEX);
 
                        if (cmd->convert_src == TRIG_TIMER) {
-                               /*  Trigger ADC scan loop start by setting RPS Signal 0. */
-                               MC_ENABLE(P_MC2, MC2_ADC_RPS);
+                               /* Trigger ADC scan loop start */
+                               s626_mc_enable(dev, MC2_ADC_RPS, P_MC2);
                        }
                }
        }
@@ -789,8 +800,8 @@ static void check_counter_interrupts(struct comedi_device *dev)
                k->ResetCapFlags(dev, k);
 
                if (cmd->scan_begin_src == TRIG_TIMER) {
-                       /*  Trigger ADC scan loop start by setting RPS Signal 0. */
-                       MC_ENABLE(P_MC2, MC2_ADC_RPS);
+                       /* Trigger ADC scan loop start */
+                       s626_mc_enable(dev, MC2_ADC_RPS, P_MC2);
                }
 
                if (cmd->convert_src == TRIG_TIMER) {
@@ -1111,8 +1122,8 @@ static int s626_ai_rinsn(struct comedi_device *dev,
        register uint8_t i;
        register int32_t *readaddr;
 
-       /* Trigger ADC scan loop start (set RPS Signal 0) */
-       MC_ENABLE(P_MC2, MC2_ADC_RPS);
+       /* Trigger ADC scan loop start */
+       s626_mc_enable(dev, MC2_ADC_RPS, P_MC2);
 
        /* Wait until ADC scan loop is finished (RPS Signal 0 reset) */
        while (MC_TEST(P_MC2, MC2_ADC_RPS))
@@ -1254,13 +1265,11 @@ static int s626_ai_load_polllist(uint8_t *ppl, struct comedi_cmd *cmd)
 static int s626_ai_inttrig(struct comedi_device *dev,
                           struct comedi_subdevice *s, unsigned int trignum)
 {
-       struct s626_private *devpriv = dev->private;
-
        if (trignum != 0)
                return -EINVAL;
 
-       /*  Start executing the RPS program. */
-       MC_ENABLE(P_MC1, MC1_ERPS1);
+       /* Start executing the RPS program */
+       s626_mc_enable(dev, MC1_ERPS1, P_MC1);
 
        s->async->inttrig = NULL;
 
@@ -1428,11 +1437,11 @@ static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 
        switch (cmd->start_src) {
        case TRIG_NOW:
-               /*  Trigger ADC scan loop start by setting RPS Signal 0. */
-               /*  MC_ENABLE( P_MC2, MC2_ADC_RPS ); */
+               /* Trigger ADC scan loop start */
+               /* s626_mc_enable(dev, MC2_ADC_RPS, P_MC2); */
 
-               /*  Start executing the RPS program. */
-               MC_ENABLE(P_MC1, MC1_ERPS1);
+               /* Start executing the RPS program */
+               s626_mc_enable(dev, MC1_ERPS1, P_MC1);
 
                s->async->inttrig = NULL;
                break;
@@ -2368,7 +2377,7 @@ static void s626_initialize(struct comedi_device *dev)
        int i;
 
        /* Enable DEBI and audio pins, enable I2C interface */
-       MC_ENABLE(P_MC1, MC1_DEBI | MC1_AUDIO | MC1_I2C);
+       s626_mc_enable(dev, MC1_DEBI | MC1_AUDIO | MC1_I2C, P_MC1);
 
        /*
         *  Configure DEBI operating mode
@@ -2396,7 +2405,7 @@ static void s626_initialize(struct comedi_device *dev)
         * operation in progress and reset BUSY flag.
         */
        WR7146(P_I2CSTAT, I2C_CLKSEL | I2C_ABORT);
-       MC_ENABLE(P_MC2, MC2_UPLD_IIC);
+       s626_mc_enable(dev, MC2_UPLD_IIC, P_MC2);
        while ((RR7146(P_MC2) & MC2_UPLD_IIC) == 0)
                ;
 
@@ -2406,7 +2415,7 @@ static void s626_initialize(struct comedi_device *dev)
         */
        for (i = 0; i < 2; i++) {
                WR7146(P_I2CSTAT, I2C_CLKSEL);
-               MC_ENABLE(P_MC2, MC2_UPLD_IIC);
+               s626_mc_enable(dev, MC2_UPLD_IIC, P_MC2);
                while (!MC_TEST(P_MC2, MC2_UPLD_IIC))
                        ;
        }