Consumer:
========
See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt and
-Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt for
+Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml for
further details.
An interrupt consumer on an SoC using crossbar will use:
pin of the SoC. Refer to generic fixed rate clock bindings
documentation[1] for more information how to specify these clocks.
-[1] Documentation/devicetree/bindings/clock/fixed-clock.txt
+[1] Documentation/devicetree/bindings/clock/fixed-clock.yaml
Example: Clock controller node:
- marvell,spi-base : List of GIC base SPI interrupts, one for each
ODMI frame. Those SPI interrupts are 0-based,
i.e marvell,spi-base = <128> will use SPI #96.
- See Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
+ See Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
for details about the GIC Device Tree binding.
Example:
- power-supply: specifies the power source. It can either be a regulator
or a gpio which enables a regulator, i.e. a regulator-fixed as
described in
- Documentation/devicetree/bindings/regulator/fixed-regulator.txt
+ Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
Example:
M: Andreas Klinger <ak@it-klinger.de>
L: linux-iio@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/iio/adc/avia-hx711.txt
+F: Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
F: drivers/iio/adc/hx711.c
AX.25 NETWORK LAYER
M: Hans de Goede <hdegoede@redhat.com>
L: linux-fbdev@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/display/simple-framebuffer.txt
+F: Documentation/devicetree/bindings/display/simple-framebuffer.yaml
F: drivers/video/fbdev/simplefb.c
F: include/linux/platform_data/simplefb.h