scsi: lpfc: fix block guard enablement on SLI3 adapters

Since f44ac12f1dcc, BG enablement is tracked with the LPFC_SLI3_BG_ENABLED
bit, which is set in lpfc_get_cfgparam before lpfc_sli_config_sli_port() is
called. The bit shouldn't be cleared before checking the feature.  Based on
problem analysis by David Bond.

Fixes: f44ac12f1dcc "scsi: lpfc: Memory allocation error during driver start-up on power8"
Tested-by: David Bond <dbond@suse.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Cc: stable@vger.kernel.org # 4.17.x
Cc: stable@vger.kernel.org # 4.18.x
Cc: stable@vger.kernel.org # 4.19.x
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 20fa6785a0e2e882b6e63ae4914625f24ec7679b..68d62d55a3a50429eb97febc179726300618f151 100644 (file)
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -167,7 +167,11 @@ lpfc_config_port_prep(struct lpfc_hba *phba)
                       sizeof(phba->wwpn));
        }
 
-       phba->sli3_options = 0x0;
+       /*
+        * Clear all option bits except LPFC_SLI3_BG_ENABLED,
+        * which was already set in lpfc_get_cfgparam()
+        */
+       phba->sli3_options &= (uint32_t)LPFC_SLI3_BG_ENABLED;
 
        /* Setup and issue mailbox READ REV command */
        lpfc_read_rev(phba, pmb);

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 783a1540cfbea6e918fb08ee71a13642e03164f8..b9e5cd79931a21293a58e18125b2e2f650d47a73 100644 (file)
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4965,7 +4965,6 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
                phba->sli3_options &= ~(LPFC_SLI3_NPIV_ENABLED |
                                        LPFC_SLI3_HBQ_ENABLED |
                                        LPFC_SLI3_CRP_ENABLED |
-                                       LPFC_SLI3_BG_ENABLED |
                                        LPFC_SLI3_DSS_ENABLED);
                if (rc != MBX_SUCCESS) {
                        lpfc_printf_log(phba, KERN_ERR, LOG_INIT,