x86: provide platform-devices for boot-framebuffers

The current situation regarding boot-framebuffers (VGA, VESA/VBE, EFI) on
x86 causes troubles when loading multiple fbdev drivers. The global
"struct screen_info" does not provide any state-tracking about which
drivers use the FBs. request_mem_region() theoretically works, but
unfortunately vesafb/efifb ignore it due to quirks for broken boards.

Avoid this by creating a platform framebuffer devices with a pointer
to the "struct screen_info" as platform-data. Drivers can now create
platform-drivers and the driver-core will refuse multiple drivers being
active simultaneously.

We keep the screen_info available for backwards-compatibility. Drivers
can be converted in follow-up patches.

Different devices are created for VGA/VESA/EFI FBs to allow multiple
drivers to be loaded on distro kernels. We create:
 - "vesa-framebuffer" for VBE/VESA graphics FBs
 - "efi-framebuffer" for EFI FBs
 - "platform-framebuffer" for everything else
This allows to load vesafb, efifb and others simultaneously and each
picks up only the supported FB types.

Apart from platform-framebuffer devices, this also introduces a
compatibility option for "simple-framebuffer" drivers which recently got
introduced for OF based systems. If CONFIG_X86_SYSFB is selected, we
try to match the screen_info against a simple-framebuffer supported
format. If we succeed, we create a "simple-framebuffer" device instead
of a platform-framebuffer.
This allows to reuse the simplefb.c driver across architectures and also
to introduce a SimpleDRM driver. There is no need to have vesafb.c,
efifb.c, simplefb.c and more just to have architecture specific quirks
in their setup-routines.

Instead, we now move the architecture specific quirks into x86-setup and
provide a generic simple-framebuffer. For backwards-compatibility (if
strange formats are used), we still allow vesafb/efifb to be loaded
simultaneously and pick up all remaining devices.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Link: http://lkml.kernel.org/r/1375445127-15480-4-git-send-email-dh.herrmann@gmail.com
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index b32ebf92b0ce96b5798bdf2a48043986be6ba6ea..5c56559e0c50f93fc8a2d6a1648ea281c6444cbb 100644 (file)
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2270,6 +2270,32 @@ config RAPIDIO
 
 source "drivers/rapidio/Kconfig"
 
+config X86_SYSFB
+       bool "Mark VGA/VBE/EFI FB as generic system framebuffer"
+       help
+         Firmwares often provide initial graphics framebuffers so the BIOS,
+         bootloader or kernel can show basic video-output during boot for
+         user-guidance and debugging. Historically, x86 used the VESA BIOS
+         Extensions and EFI-framebuffers for this, which are mostly limited
+         to x86.
+         This option, if enabled, marks VGA/VBE/EFI framebuffers as generic
+         framebuffers so the new generic system-framebuffer drivers can be
+         used on x86. If the framebuffer is not compatible with the generic
+         modes, it is adverticed as fallback platform framebuffer so legacy
+         drivers like efifb, vesafb and uvesafb can pick it up.
+         If this option is not selected, all system framebuffers are always
+         marked as fallback platform framebuffers as usual.
+
+         Note: Legacy fbdev drivers, including vesafb, efifb, uvesafb, will
+         not be able to pick up generic system framebuffers if this option
+         is selected. You are highly encouraged to enable simplefb as
+         replacement if you select this option. simplefb can correctly deal
+         with generic system framebuffers. But you should still keep vesafb
+         and others enabled as fallback if a system framebuffer is
+         incompatible with simplefb.
+
+         If unsure, say Y.
+
 endmenu
 
 

diff --git a/arch/x86/include/asm/sysfb.h b/arch/x86/include/asm/sysfb.h
new file mode 100644 (file)
index 0000000..2395fe0
--- /dev/null
+++ b/arch/x86/include/asm/sysfb.h
@@ -0,0 +1,41 @@
+#ifndef _ARCH_X86_KERNEL_SYSFB_H
+#define _ARCH_X86_KERNEL_SYSFB_H
+
+/*
+ * Generic System Framebuffers on x86
+ * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_data/simplefb.h>
+#include <linux/screen_info.h>
+
+#ifdef CONFIG_X86_SYSFB
+
+bool parse_mode(const struct screen_info *si,
+               struct simplefb_platform_data *mode);
+int create_simplefb(const struct screen_info *si,
+                   const struct simplefb_platform_data *mode);
+
+#else /* CONFIG_X86_SYSFB */
+
+static inline bool parse_mode(const struct screen_info *si,
+                             struct simplefb_platform_data *mode)
+{
+       return false;
+}
+
+static inline int create_simplefb(const struct screen_info *si,
+                                 const struct simplefb_platform_data *mode)
+{
+       return -EINVAL;
+}
+
+#endif /* CONFIG_X86_SYSFB */
+
+#endif /* _ARCH_X86_KERNEL_SYSFB_H */

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 88d99ea77723f768385c602e98fa9a5a1ed58e1c..90ecdc5d471a5cc0212db110499855fd4b4cc04f 100644 (file)
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -103,6 +103,8 @@ obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o
 obj-$(CONFIG_SWIOTLB)                  += pci-swiotlb.o
 obj-$(CONFIG_OF)                       += devicetree.o
 obj-$(CONFIG_UPROBES)                  += uprobes.o
+obj-y                                  += sysfb.o
+obj-$(CONFIG_X86_SYSFB)                        += sysfb_simplefb.o
 
 obj-$(CONFIG_PERF_EVENTS)              += perf_regs.o
 obj-$(CONFIG_TRACING)                  += tracepoint.o

diff --git a/arch/x86/kernel/sysfb.c b/arch/x86/kernel/sysfb.c
new file mode 100644 (file)
index 0000000..7f30e19
--- /dev/null
+++ b/arch/x86/kernel/sysfb.c
@@ -0,0 +1,71 @@
+/*
+ * Generic System Framebuffers on x86
+ * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * Simple-Framebuffer support for x86 systems
+ * Create a platform-device for any available boot framebuffer. The
+ * simple-framebuffer platform device is already available on DT systems, so
+ * this module parses the global "screen_info" object and creates a suitable
+ * platform device compatible with the "simple-framebuffer" DT object. If
+ * the framebuffer is incompatible, we instead create a legacy
+ * "vesa-framebuffer", "efi-framebuffer" or "platform-framebuffer" device and
+ * pass the screen_info as platform_data. This allows legacy drivers
+ * to pick these devices up without messing with simple-framebuffer drivers.
+ * The global "screen_info" is still valid at all times.
+ *
+ * If CONFIG_X86_SYSFB is not selected, we never register "simple-framebuffer"
+ * platform devices, but only use legacy framebuffer devices for
+ * backwards compatibility.
+ *
+ * TODO: We set the dev_id field of all platform-devices to 0. This allows
+ * other x86 OF/DT parsers to create such devices, too. However, they must
+ * start at offset 1 for this to work.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/platform_data/simplefb.h>
+#include <linux/platform_device.h>
+#include <linux/screen_info.h>
+#include <asm/sysfb.h>
+
+static __init int sysfb_init(void)
+{
+       struct screen_info *si = &screen_info;
+       struct simplefb_platform_data mode;
+       struct platform_device *pd;
+       const char *name;
+       bool compatible;
+       int ret;
+
+       /* try to create a simple-framebuffer device */
+       compatible = parse_mode(si, &mode);
+       if (compatible) {
+               ret = create_simplefb(si, &mode);
+               if (!ret)
+                       return 0;
+       }
+
+       /* if the FB is incompatible, create a legacy framebuffer device */
+       if (si->orig_video_isVGA == VIDEO_TYPE_EFI)
+               name = "efi-framebuffer";
+       else if (si->orig_video_isVGA == VIDEO_TYPE_VLFB)
+               name = "vesa-framebuffer";
+       else
+               name = "platform-framebuffer";
+
+       pd = platform_device_register_resndata(NULL, name, 0,
+                                              NULL, 0, si, sizeof(*si));
+       return IS_ERR(pd) ? PTR_ERR(pd) : 0;
+}
+
+device_initcall(sysfb_init);

diff --git a/arch/x86/kernel/sysfb_simplefb.c b/arch/x86/kernel/sysfb_simplefb.c
new file mode 100644 (file)
index 0000000..22513e9
--- /dev/null
+++ b/arch/x86/kernel/sysfb_simplefb.c
@@ -0,0 +1,95 @@
+/*
+ * Generic System Framebuffers on x86
+ * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * simple-framebuffer probing
+ * Try to convert "screen_info" into a "simple-framebuffer" compatible mode.
+ * If the mode is incompatible, we return "false" and let the caller create
+ * legacy nodes instead.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/platform_data/simplefb.h>
+#include <linux/platform_device.h>
+#include <linux/screen_info.h>
+#include <asm/sysfb.h>
+
+static const char simplefb_resname[] = "BOOTFB";
+static const struct simplefb_format formats[] = SIMPLEFB_FORMATS;
+
+/* try parsing x86 screen_info into a simple-framebuffer mode struct */
+__init bool parse_mode(const struct screen_info *si,
+                      struct simplefb_platform_data *mode)
+{
+       const struct simplefb_format *f;
+       __u8 type;
+       unsigned int i;
+
+       type = si->orig_video_isVGA;
+       if (type != VIDEO_TYPE_VLFB && type != VIDEO_TYPE_EFI)
+               return false;
+
+       for (i = 0; i < ARRAY_SIZE(formats); ++i) {
+               f = &formats[i];
+               if (si->lfb_depth == f->bits_per_pixel &&
+                   si->red_size == f->red.length &&
+                   si->red_pos == f->red.offset &&
+                   si->green_size == f->green.length &&
+                   si->green_pos == f->green.offset &&
+                   si->blue_size == f->blue.length &&
+                   si->blue_pos == f->blue.offset &&
+                   si->rsvd_size == f->transp.length &&
+                   si->rsvd_pos == f->transp.offset) {
+                       mode->format = f->name;
+                       mode->width = si->lfb_width;
+                       mode->height = si->lfb_height;
+                       mode->stride = si->lfb_linelength;
+                       return true;
+               }
+       }
+
+       return false;
+}
+
+__init int create_simplefb(const struct screen_info *si,
+                          const struct simplefb_platform_data *mode)
+{
+       struct platform_device *pd;
+       struct resource res;
+       unsigned long len;
+
+       /* don't use lfb_size as it may contain the whole VMEM instead of only
+        * the part that is occupied by the framebuffer */
+       len = mode->height * mode->stride;
+       len = PAGE_ALIGN(len);
+       if (len > si->lfb_size << 16) {
+               printk(KERN_WARNING "sysfb: VRAM smaller than advertised\n");
+               return -EINVAL;
+       }
+
+       /* setup IORESOURCE_MEM as framebuffer memory */
+       memset(&res, 0, sizeof(res));
+       res.flags = IORESOURCE_MEM;
+       res.name = simplefb_resname;
+       res.start = si->lfb_base;
+       res.end = si->lfb_base + len - 1;
+       if (res.end <= res.start)
+               return -EINVAL;
+
+       pd = platform_device_register_resndata(NULL, "simple-framebuffer", 0,
+                                              &res, 1, mode, sizeof(*mode));
+       if (IS_ERR(pd))
+               return PTR_ERR(pd);
+
+       return 0;
+}