return;
}
- acpi_os_printf("ADR: %8.8X%8.8X, STA: %8.8X, Flags: %X\n",
- ACPI_FORMAT_UINT64(info->address),
- info->current_status, info->flags);
+ acpi_os_printf("ADR: %8.8X%8.8X, Flags: %X\n",
+ ACPI_FORMAT_UINT64(info->address), info->flags);
acpi_os_printf("S1D-%2.2X S2D-%2.2X S3D-%2.2X S4D-%2.2X\n",
info->highest_dstates[0], info->highest_dstates[1],
* namespace node and possibly by running several standard
* control methods (Such as in the case of a device.)
*
- * For Device and Processor objects, run the Device _HID, _UID, _CID, _STA,
+ * For Device and Processor objects, run the Device _HID, _UID, _CID,
* _CLS, _ADR, _sx_w, and _sx_d methods.
*
* Note: Allocates the return buffer, must be freed by the caller.
* discovery namespace traversal. Therefore, no complex methods can be
* executed, especially those that access operation regions. Therefore, do
* not add any additional methods that could cause problems in this area.
- * this was the fate of the _SUB method which was found to cause such
- * problems and was removed (11/2015).
+ * Because of this reason support for the following methods has been removed:
+ * 1) _SUB method was removed (11/2015)
+ * 2) _STA method was removed (02/2018)
*
******************************************************************************/
if ((type == ACPI_TYPE_DEVICE) || (type == ACPI_TYPE_PROCESSOR)) {
/*
* Get extra info for ACPI Device/Processor objects only:
- * Run the _STA, _ADR and, sx_w, and _sx_d methods.
+ * Run the _ADR and, sx_w, and _sx_d methods.
*
* Notes: none of these methods are required, so they may or may
* not be present for this device. The Info->Valid bitfield is used
* to indicate which methods were found and run successfully.
- *
- * For _STA, if the method does not exist, then (as per the ACPI
- * specification), the returned current_status flags will indicate
- * that the device is present/functional/enabled. Otherwise, the
- * current_status flags reflect the value returned from _STA.
*/
- /* Execute the Device._STA method */
-
- status = acpi_ut_execute_STA(node, &info->current_status);
- if (ACPI_SUCCESS(status)) {
- valid |= ACPI_VALID_STA;
- }
-
/* Execute the Device._ADR method */
status = acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR, node,
u8 flags; /* Miscellaneous info */
u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */
u8 lowest_dstates[5]; /* _sx_w values: 0xFF indicates not valid */
- u32 current_status; /* _STA value */
u64 address; /* _ADR value */
struct acpi_pnp_device_id hardware_id; /* _HID value */
struct acpi_pnp_device_id unique_id; /* _UID value */
/* Flags for Valid field above (acpi_get_object_info) */
-#define ACPI_VALID_STA 0x0001
#define ACPI_VALID_ADR 0x0002
#define ACPI_VALID_HID 0x0004
#define ACPI_VALID_UID 0x0008