ramips: add support for Linksys RE7000

Hardware specification:

- SoC: MediaTek MT7621AT (880 MHz)
- Flash: 16 MB (Macronix MX25L12835FM2I-10G)
- RAM: 128 MB (Nanya NT5CC64M16GP-DI)
- WLAN 2.4 GHz: 2x2 MediaTek MT7603EN
- WLAN 5 GHz: 2x2 MediaTek MT7615N
- Ethernet: 1x 10/100/1000 Mbps
- LED: Power, Wifi, WPS
- Button: Reset, WPS
- UART: 1:VCC, 2:GND, 3:TX, 4:RX (from LAN port)
  Serial console @ 57600,8n1

Flash instructions:

Connect to serial console and start up the device. As the bootloader got
locked you need to type in a password to unlock U-Boot access.
When you see the following output on the console:

relocate_code Pointer at: 87f1c000

type in the super secure password:

1234567890

Then select TFTP boot from RAM by selecting option 1 in the boot menu.
As Linksys decided to leave out a basic TFTP configuration you need to
set server- & client ip as well as the image filename the device will
search for. You need to use the initramfs openwrt image for the TFTP
boot process.

Once openwrt has booted up, upload the sysupgrade image via scp and run
sysupgrade as normal.

Signed-off-by: Christoph Krapp <achterin@gmail.com>

diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips
index f981fc73efc0ddb9804a376e794661ee0f991716..6f351af212294aad0bb1c866508760d5a8fe097b 100644 (file)
--- a/package/boot/uboot-envtools/files/ramips
+++ b/package/boot/uboot-envtools/files/ramips
@@ -19,6 +19,7 @@ alfa-network,r36m-e4g|\
 alfa-network,tube-e4g|\
 engenius,epg600|\
 engenius,esr600h|\
+linksys,re7000|\
 sitecom,wlr-4100-v1-002|\
 zyxel,keenetic-lite-iii-a)
        ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x1000"

diff --git a/target/linux/ramips/dts/mt7621_linksys_re7000.dts b/target/linux/ramips/dts/mt7621_linksys_re7000.dts
new file mode 100644 (file)
index 0000000..5e33f48
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_linksys_re7000.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "linksys,re7000", "mediatek,mt7621-soc";
+       model = "Linksys RE7000";
+
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               wifi {
+                       label = "orange:wifi";
+                       gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               wps {
+                       label = "orange:wps";
+                       gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+               };
+
+               led_power: power {
+                       label = "green:power";
+                       gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x1000>;
+                       };
+
+                       partition@32000 {
+                               label = "config";
+                               reg = <0x32000 0xe000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0xfb0000>;
+                       };
+               };
+       };
+};
+
+&state_default {
+       gpio {
+               groups = "i2c", "uart2", "rgmii2";
+               function = "gpio";
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0000>;
+               ieee80211-freq-limit = <2400000 2500000>;
+       };
+};
+
+&pcie1 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
+       };
+};
+
+&gmac0 {
+       nvmem-cells = <&macaddr_factory_2e>;
+       nvmem-cell-names = "mac-address";
+};
+
+&ethernet {
+       pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
+};
+
+&switch0 {
+       ports {
+               port@0 {
+                       status = "okay";
+                       label = "lan";
+               };
+       };
+};
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_2e: macaddr@2e {
+               reg = <0x2e 0x6>;
+       };
+};

diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index d33937a8d743e88708ed805d9c4cb0e5fcaafa2b..582d53c4230c63ec135350021054ea05b4b3de3d 100644 (file)
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -1541,6 +1541,15 @@ define Device/linksys_re6500
 endef
 TARGET_DEVICES += linksys_re6500
 
+define Device/linksys_re7000
+  $(Device/uimage-lzma-loader)
+  IMAGE_SIZE := 16064k
+  DEVICE_VENDOR := Linksys
+  DEVICE_MODEL := RE7000
+  DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware
+endef
+TARGET_DEVICES += linksys_re7000
+
 define Device/mediatek_ap-mt7621a-v60
   $(Device/dsa-migration)
   IMAGE_SIZE := 7872k

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index a986e9bac91dafdf41b73bbb3d44514f6ccc7294..5b7cc7f2ca973be886d0b9a96d311a15d9658e97 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -17,6 +17,7 @@ ramips_setup_interfaces()
        dlink,dap-1620-b1|\
        dlink,dap-x1860-a1|\
        edimax,re23s|\
+       linksys,re7000|\
        mikrotik,ltap-2hnd|\
        mikrotik,routerboard-m11g|\
        netgear,ex6150|\