ARM64: dts: marvell: armada-cp110: Add registers clock for USB host nodes

This extra clock is needed to access the registers of the USB host
controller used on Armada 7K/8K SoCs.

This follow the changes already made in the binding documentation (as
well as in the driver): "usb: host: xhci-plat: Fix clock resource by
adding a register clock"

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index 355bb295e4d99c39c43ff1704808eda4f9068b79..c35368d2a4cd1111cf9fd48dee4a2647d204b75d 100644 (file)
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -211,7 +211,9 @@
                        reg = <0x500000 0x4000>;
                        dma-coherent;
                        interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&CP110_LABEL(clk) 1 22>;
+                       clock-names = "core", "reg";
+                       clocks = <&CP110_LABEL(clk) 1 22>,
+                                <&CP110_LABEL(clk) 1 16>;
                        status = "disabled";
                };
 
@@ -221,7 +223,9 @@
                        reg = <0x510000 0x4000>;
                        dma-coherent;
                        interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&CP110_LABEL(clk) 1 23>;
+                       clock-names = "core", "reg";
+                       clocks = <&CP110_LABEL(clk) 1 23>,
+                                <&CP110_LABEL(clk) 1 16>;
                        status = "disabled";
                };