- Debug global var is already used inside kernel.
- v4l_dbg now expects the debug var
- global vars inside msp34xx renamed to msp_*
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
if(debug>1) {
int i;
- v4l_dbg(2,i2c_client_s,"hexdump:");
+ v4l_dbg(2, debug,i2c_client_s,"hexdump:");
for(i=1;i<65;i++) {
if(i!=1) {
if(((i-1)%8)==0) printk(" ");
if(((i-1)%16)==0) {
printk("\n");
- v4l_dbg(2,i2c_client_s,"hexdump:");
+ v4l_dbg(2, debug,i2c_client_s,"hexdump:");
}
}
printk(" %02x",buf[i]);
for (i = 1; i <= 7; i++) {
u8 v = cs53l32a_read(client, i);
- v4l_dbg(1, client, "Read Reg %d %02x\n", i, v);
+ v4l_dbg(1, debug, client, "Read Reg %d %02x\n", i, v);
}
/* Set cs53l32a internal register for Adaptec 2010/2410 setup */
for (i = 1; i <= 7; i++) {
u8 v = cs53l32a_read(client, i);
- v4l_dbg(1, client, "Read Reg %d %02x\n", i, v);
+ v4l_dbg(1, debug, client, "Read Reg %d %02x\n", i, v);
}
i2c_attach_client(client);
vid_input <= CX25840_COMPOSITE8);
u8 reg;
- v4l_dbg(1, client, "decoder set video input %d, audio input %d\n",
+ v4l_dbg(1, debug, client, "decoder set video input %d, audio input %d\n",
vid_input, aud_input);
if (is_composite) {
else
filter = 3;
- v4l_dbg(1, client, "decoder set size %dx%d -> scale %ux%u\n",
+ v4l_dbg(1, debug, client, "decoder set size %dx%d -> scale %ux%u\n",
pix->width, pix->height, HSC, VSC);
/* HSCALE=HSC */
return cx25840_audio(client, cmd, arg);
case VIDIOC_STREAMON:
- v4l_dbg(1, client, "enable output\n");
+ v4l_dbg(1, debug, client, "enable output\n");
cx25840_write(client, 0x115, 0x8c);
cx25840_write(client, 0x116, 0x07);
break;
case VIDIOC_STREAMOFF:
- v4l_dbg(1, client, "disable output\n");
+ v4l_dbg(1, debug, client, "disable output\n");
cx25840_write(client, 0x115, 0x00);
cx25840_write(client, 0x116, 0x00);
break;
client->driver = &i2c_driver_cx25840;
snprintf(client->name, sizeof(client->name) - 1, "cx25840");
- v4l_dbg(1, client, "detecting cx25840 client on address 0x%x\n", address << 1);
+ v4l_dbg(1, debug, client, "detecting cx25840 client on address 0x%x\n", address << 1);
device_id = cx25840_read(client, 0x101) << 8;
device_id |= cx25840_read(client, 0x100);
/* The high byte of the device ID should be
* 0x84 if chip is present */
if ((device_id & 0xff00) != 0x8400) {
- v4l_dbg(1, client, "cx25840 not found\n");
+ v4l_dbg(1, debug, client, "cx25840 not found\n");
kfree(client);
return 0;
}
/* module parameters */
static int opmode = OPMODE_AUTO;
-int debug = 0; /* debug output */
-int once = 0; /* no continous stereo monitoring */
-int amsound = 0; /* hard-wire AM sound at 6.5 Hz (france),
+int msp_debug = 0; /* msp_debug output */
+int msp_once = 0; /* no continous stereo monitoring */
+int msp_amsound = 0; /* hard-wire AM sound at 6.5 Hz (france),
the autoscan seems work well only with FM... */
-int standard = 1; /* Override auto detect of audio standard, if needed. */
-int dolby = 0;
+int msp_standard = 1; /* Override auto detect of audio msp_standard, if needed. */
+int msp_dolby = 0;
-int stereo_threshold = 0x190; /* a2 threshold for stereo/bilingual
+int msp_stereo_thresh = 0x190; /* a2 threshold for stereo/bilingual
(msp34xxg only) 0x00a0-0x03c0 */
/* read-only */
module_param(opmode, int, 0444);
/* read-write */
-module_param(once, bool, 0644);
-module_param(debug, int, 0644);
-module_param(stereo_threshold, int, 0644);
-module_param(standard, int, 0644);
-module_param(amsound, bool, 0644);
-module_param(dolby, bool, 0644);
+module_param_named(once,msp_once, bool, 0644);
+module_param_named(debug,msp_debug, int, 0644);
+module_param_named(stereo_threshold,msp_stereo_thresh, int, 0644);
+module_param_named(standard,msp_standard, int, 0644);
+module_param_named(amsound,msp_amsound, bool, 0644);
+module_param_named(dolby,msp_dolby, bool, 0644);
MODULE_PARM_DESC(opmode, "Forces a MSP3400 opmode. 0=Manual, 1=Autodetect, 2=Autodetect and autoselect");
MODULE_PARM_DESC(once, "No continuous stereo monitoring");
{ client->addr, I2C_M_RD, 2, read },
};
- v4l_dbg(3, client, "msp_reset\n");
+ v4l_dbg(3, msp_debug, client, "msp_reset\n");
if (i2c_transfer(client->adapter, &reset[0], 1) != 1 ||
i2c_transfer(client->adapter, &reset[1], 1) != 1 ||
i2c_transfer(client->adapter, test, 2) != 2) {
return -1;
}
retval = read[0] << 8 | read[1];
- v4l_dbg(3, client, "msp_read(0x%x, 0x%x): 0x%x\n", dev, addr, retval);
+ v4l_dbg(3, msp_debug, client, "msp_read(0x%x, 0x%x): 0x%x\n", dev, addr, retval);
return retval;
}
buffer[3] = val >> 8;
buffer[4] = val & 0xff;
- v4l_dbg(3, client, "msp_write(0x%x, 0x%x, 0x%x)\n", dev, addr, val);
+ v4l_dbg(3, msp_debug, client, "msp_write(0x%x, 0x%x, 0x%x)\n", dev, addr, val);
for (err = 0; err < 3; err++) {
if (i2c_master_send(client, buffer, 5) == 5)
break;
} else
state->acb = 0xf60; /* Mute Input and SCART 1 Output */
- v4l_dbg(1, client, "scart switch: %s => %d (ACB=0x%04x)\n",
+ v4l_dbg(1, msp_debug, client, "scart switch: %s => %d (ACB=0x%04x)\n",
scart_names[in], out, state->acb);
msp_write_dsp(client, 0x13, state->acb);
{
struct msp_state *state = i2c_get_clientdata(client);
- v4l_dbg(1, client, "mute audio\n");
+ v4l_dbg(1, msp_debug, client, "mute audio\n");
msp_write_dsp(client, 0x0000, 0);
msp_write_dsp(client, 0x0007, 1);
if (state->has_scart2_out_volume)
if (!state->muted)
val = (state->volume * 0x7f / 65535) << 8;
- v4l_dbg(1, client, "mute=%s volume=%d\n",
+ v4l_dbg(1, msp_debug, client, "mute=%s volume=%d\n",
state->muted ? "on" : "off", state->volume);
msp_write_dsp(client, 0x0000, val);
treble = ((state->treble - 32768) * 0x60 / 65535) << 8;
loudness = state->loudness ? ((5 * 4) << 8) : 0;
- v4l_dbg(1, client, "balance=%d bass=%d treble=%d loudness=%d\n",
+ v4l_dbg(1, msp_debug, client, "balance=%d bass=%d treble=%d loudness=%d\n",
state->balance, state->bass, state->treble, state->loudness);
msp_write_dsp(client, 0x0001, bal << 8);
struct msp_state *state = i2c_get_clientdata(client);
if (state->radio) {
- v4l_dbg(1, client, "video mode selected to Radio\n");
+ v4l_dbg(1, msp_debug, client, "video mode selected to Radio\n");
return 0x0003;
}
if (state->v4l2_std & V4L2_STD_PAL) {
- v4l_dbg(1, client, "video mode selected to PAL\n");
+ v4l_dbg(1, msp_debug, client, "video mode selected to PAL\n");
#if 1
/* experimental: not sure this works with all chip versions */
#endif
}
if (state->v4l2_std & V4L2_STD_NTSC) {
- v4l_dbg(1, client, "video mode selected to NTSC\n");
+ v4l_dbg(1, msp_debug, client, "video mode selected to NTSC\n");
return 0x2003;
}
if (state->v4l2_std & V4L2_STD_SECAM) {
- v4l_dbg(1, client, "video mode selected to SECAM\n");
+ v4l_dbg(1, msp_debug, client, "video mode selected to SECAM\n");
return 0x0003;
}
return 0x0003;
u16 *sarg = arg;
int scart = 0;
- if (debug >= 2)
+ if (msp_debug >= 2)
v4l_i2c_print_ioctl(client, cmd);
switch (cmd) {
if (state->radio)
return 0;
state->radio = 1;
- v4l_dbg(1, client, "switching to radio mode\n");
+ v4l_dbg(1, msp_debug, client, "switching to radio mode\n");
state->watch_stereo = 0;
switch (state->opmode) {
case OPMODE_MANUAL:
if (a->index < 0 || a->index > 2)
return -EINVAL;
- v4l_dbg(1, client, "Setting audio out on msp34xx to input %i\n", a->index);
+ v4l_dbg(1, msp_debug, client, "Setting audio out on msp34xx to input %i\n", a->index);
msp_set_scart(client, state->in_scart, a->index + 1);
break;
{
u32 *a = (u32 *)arg;
- v4l_dbg(1, client, "Setting I2S speed to %d\n", *a);
+ v4l_dbg(1, msp_debug, client, "Setting I2S speed to %d\n", *a);
switch (*a) {
case 1024000:
{
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
- v4l_dbg(1, client, "suspend\n");
+ v4l_dbg(1, msp_debug, client, "suspend\n");
msp_reset(client);
return 0;
}
{
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
- v4l_dbg(1, client, "resume\n");
+ v4l_dbg(1, msp_debug, client, "resume\n");
msp_wake_thread(client);
return 0;
}
snprintf(client->name, sizeof(client->name) - 1, "msp3400");
if (msp_reset(client) == -1) {
- v4l_dbg(1, client, "msp3400 not found\n");
+ v4l_dbg(1, msp_debug, client, "msp3400 not found\n");
kfree(client);
return -1;
}
state->rev1 = msp_read_dsp(client, 0x1e);
if (state->rev1 != -1)
state->rev2 = msp_read_dsp(client, 0x1f);
- v4l_dbg(1, client, "rev1=0x%04x, rev2=0x%04x\n", state->rev1, state->rev2);
+ v4l_dbg(1, msp_debug, client, "rev1=0x%04x, rev2=0x%04x\n", state->rev1, state->rev2);
if (state->rev1 == -1 || (state->rev1 == 0 && state->rev2 == 0)) {
- v4l_dbg(1, client, "not an msp3400 (cannot read chip version)\n");
+ v4l_dbg(1, msp_debug, client, "not an msp3400 (cannot read chip version)\n");
kfree(state);
kfree(client);
return -1;
struct msp_state *state = i2c_get_clientdata(client);
int i;
- v4l_dbg(1, client, "setmode: %d\n", type);
+ v4l_dbg(1, msp_debug, client, "setmode: %d\n", type);
state->mode = type;
state->audmode = V4L2_TUNER_MODE_MONO;
state->rxsubchans = V4L2_TUNER_SUB_MONO;
msp_write_dem(client, 0x0056, 0); /*LOAD_REG_1/2*/
- if (dolby) {
+ if (msp_dolby) {
msp_write_dsp(client, 0x0008, 0x0520); /* I2S1 */
msp_write_dsp(client, 0x0009, 0x0620); /* I2S2 */
msp_write_dsp(client, 0x000b, msp3400c_init_data[type].dsp_src);
/* this method would break everything, let's make sure
* it's never called
*/
- v4l_dbg(1, client, "setstereo called with mode=%d instead of set_source (ignored)\n",
+ v4l_dbg(1, msp_debug, client, "setstereo called with mode=%d instead of set_source (ignored)\n",
mode);
return;
}
/* switch demodulator */
switch (state->mode) {
case MSP_MODE_FM_TERRA:
- v4l_dbg(1, client, "FM setstereo: %s\n", strmode[mode]);
+ v4l_dbg(1, msp_debug, client, "FM setstereo: %s\n", strmode[mode]);
msp3400c_setcarrier(client, state->second, state->main);
switch (mode) {
case V4L2_TUNER_MODE_STEREO:
}
break;
case MSP_MODE_FM_SAT:
- v4l_dbg(1, client, "SAT setstereo: %s\n", strmode[mode]);
+ v4l_dbg(1, msp_debug, client, "SAT setstereo: %s\n", strmode[mode]);
switch (mode) {
case V4L2_TUNER_MODE_MONO:
msp3400c_setcarrier(client, MSP_CARRIER(6.5), MSP_CARRIER(6.5));
case MSP_MODE_FM_NICAM1:
case MSP_MODE_FM_NICAM2:
case MSP_MODE_AM_NICAM:
- v4l_dbg(1, client, "NICAM setstereo: %s\n",strmode[mode]);
+ v4l_dbg(1, msp_debug, client, "NICAM setstereo: %s\n",strmode[mode]);
msp3400c_setcarrier(client,state->second,state->main);
if (state->nicam_on)
nicam=0x0100;
break;
case MSP_MODE_BTSC:
- v4l_dbg(1, client, "BTSC setstereo: %s\n",strmode[mode]);
+ v4l_dbg(1, msp_debug, client, "BTSC setstereo: %s\n",strmode[mode]);
nicam=0x0300;
break;
case MSP_MODE_EXTERN:
- v4l_dbg(1, client, "extern setstereo: %s\n",strmode[mode]);
+ v4l_dbg(1, msp_debug, client, "extern setstereo: %s\n",strmode[mode]);
nicam = 0x0200;
break;
case MSP_MODE_FM_RADIO:
- v4l_dbg(1, client, "FM-Radio setstereo: %s\n",strmode[mode]);
+ v4l_dbg(1, msp_debug, client, "FM-Radio setstereo: %s\n",strmode[mode]);
break;
default:
- v4l_dbg(1, client, "mono setstereo\n");
+ v4l_dbg(1, msp_debug, client, "mono setstereo\n");
return;
}
break;
case V4L2_TUNER_MODE_MONO:
if (state->mode == MSP_MODE_AM_NICAM) {
- v4l_dbg(1, client, "switching to AM mono\n");
+ v4l_dbg(1, msp_debug, client, "switching to AM mono\n");
/* AM mono decoding is handled by tuner, not MSP chip */
/* SCART switching control register */
msp_set_scart(client, SCART_MONO, 0);
src = 0x0010 | nicam;
break;
}
- v4l_dbg(1, client, "setstereo final source/matrix = 0x%x\n", src);
+ v4l_dbg(1, msp_debug, client, "setstereo final source/matrix = 0x%x\n", src);
- if (dolby) {
+ if (msp_dolby) {
msp_write_dsp(client, 0x0008, 0x0520);
msp_write_dsp(client, 0x0009, 0x0620);
msp_write_dsp(client, 0x000a, src);
struct msp_state *state = i2c_get_clientdata(client);
if (state->main == state->second) {
- v4l_dbg(1, client, "mono sound carrier: %d.%03d MHz\n",
+ v4l_dbg(1, msp_debug, client, "mono sound carrier: %d.%03d MHz\n",
state->main / 910000, (state->main / 910) % 1000);
} else {
- v4l_dbg(1, client, "main sound carrier: %d.%03d MHz\n",
+ v4l_dbg(1, msp_debug, client, "main sound carrier: %d.%03d MHz\n",
state->main / 910000, (state->main / 910) % 1000);
}
if (state->mode == MSP_MODE_FM_NICAM1 || state->mode == MSP_MODE_FM_NICAM2)
- v4l_dbg(1, client, "NICAM/FM carrier : %d.%03d MHz\n",
+ v4l_dbg(1, msp_debug, client, "NICAM/FM carrier : %d.%03d MHz\n",
state->second / 910000, (state->second/910) % 1000);
if (state->mode == MSP_MODE_AM_NICAM)
- v4l_dbg(1, client, "NICAM/AM carrier : %d.%03d MHz\n",
+ v4l_dbg(1, msp_debug, client, "NICAM/AM carrier : %d.%03d MHz\n",
state->second / 910000, (state->second / 910) % 1000);
if (state->mode == MSP_MODE_FM_TERRA && state->main != state->second) {
- v4l_dbg(1, client, "FM-stereo carrier : %d.%03d MHz\n",
+ v4l_dbg(1, msp_debug, client, "FM-stereo carrier : %d.%03d MHz\n",
state->second / 910000, (state->second / 910) % 1000);
}
}
val = msp_read_dsp(client, 0x18);
if (val > 32767)
val -= 65536;
- v4l_dbg(2, client, "stereo detect register: %d\n", val);
+ v4l_dbg(2, msp_debug, client, "stereo detect register: %d\n", val);
if (val > 4096) {
rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO;
} else if (val < -4096) {
case MSP_MODE_FM_NICAM2:
case MSP_MODE_AM_NICAM:
val = msp_read_dem(client, 0x23);
- v4l_dbg(2, client, "nicam sync=%d, mode=%d\n",
+ v4l_dbg(2, msp_debug, client, "nicam sync=%d, mode=%d\n",
val & 1, (val & 0x1e) >> 1);
if (val & 1) {
break;
case MSP_MODE_BTSC:
val = msp_read_dem(client, 0x200);
- v4l_dbg(2, client, "status=0x%x (pri=%s, sec=%s, %s%s%s)\n",
+ v4l_dbg(2, msp_debug, client, "status=0x%x (pri=%s, sec=%s, %s%s%s)\n",
val,
(val & 0x0002) ? "no" : "yes",
(val & 0x0004) ? "no" : "yes",
}
if (rxsubchans != state->rxsubchans) {
update = 1;
- v4l_dbg(1, client, "watch: rxsubchans %d => %d\n",
+ v4l_dbg(1, msp_debug, client, "watch: rxsubchans %d => %d\n",
state->rxsubchans,rxsubchans);
state->rxsubchans = rxsubchans;
}
if (newnicam != state->nicam_on) {
update = 1;
- v4l_dbg(1, client, "watch: nicam %d => %d\n",
+ v4l_dbg(1, msp_debug, client, "watch: nicam %d => %d\n",
state->nicam_on,newnicam);
state->nicam_on = newnicam;
}
msp3400c_setstereo(client, V4L2_TUNER_MODE_MONO);
}
- if (once)
+ if (msp_once)
state->watch_stereo = 0;
}
int count, max1,max2,val1,val2, val,this;
- v4l_dbg(1, client, "msp3400 daemon started\n");
+ v4l_dbg(1, msp_debug, client, "msp3400 daemon started\n");
for (;;) {
- v4l_dbg(2, client, "msp3400 thread: sleep\n");
+ v4l_dbg(2, msp_debug, client, "msp3400 thread: sleep\n");
msp_sleep(state, -1);
- v4l_dbg(2, client, "msp3400 thread: wakeup\n");
+ v4l_dbg(2, msp_debug, client, "msp3400 thread: wakeup\n");
restart:
- v4l_dbg(1, client, "thread: restart scan\n");
+ v4l_dbg(1, msp_debug, client, "thread: restart scan\n");
state->restart = 0;
if (kthread_should_stop())
break;
if (state->radio || MSP_MODE_EXTERN == state->mode) {
/* no carrier scan, just unmute */
- v4l_dbg(1, client, "thread: no carrier scan\n");
+ v4l_dbg(1, msp_debug, client, "thread: no carrier scan\n");
msp_set_audio(client);
continue;
}
cd = msp3400c_carrier_detect_main;
count = ARRAY_SIZE(msp3400c_carrier_detect_main);
- if (amsound && (state->v4l2_std & V4L2_STD_SECAM)) {
+ if (msp_amsound && (state->v4l2_std & V4L2_STD_SECAM)) {
/* autodetect doesn't work well with AM ... */
max1 = 3;
count = 0;
- v4l_dbg(1, client, "AM sound override\n");
+ v4l_dbg(1, msp_debug, client, "AM sound override\n");
}
for (this = 0; this < count; this++) {
val -= 65536;
if (val1 < val)
val1 = val, max1 = this;
- v4l_dbg(1, client, "carrier1 val: %5d / %s\n", val,cd[this].name);
+ v4l_dbg(1, msp_debug, client, "carrier1 val: %5d / %s\n", val,cd[this].name);
}
/* carrier detect pass #2 -- second (stereo) carrier */
break;
}
- if (amsound && (state->v4l2_std & V4L2_STD_SECAM)) {
+ if (msp_amsound && (state->v4l2_std & V4L2_STD_SECAM)) {
/* autodetect doesn't work well with AM ... */
cd = NULL;
count = 0;
val -= 65536;
if (val2 < val)
val2 = val, max2 = this;
- v4l_dbg(1, client, "carrier2 val: %5d / %s\n", val,cd[this].name);
+ v4l_dbg(1, msp_debug, client, "carrier2 val: %5d / %s\n", val,cd[this].name);
}
/* program the msp3400 according to the results */
/* unmute */
msp_set_audio(client);
- if (debug)
+ if (msp_debug)
msp3400c_print_mode(client);
/* monitor tv audio mode */
watch_stereo(client);
}
}
- v4l_dbg(1, client, "thread: exit\n");
+ v4l_dbg(1, msp_debug, client, "thread: exit\n");
return 0;
}
struct msp_state *state = i2c_get_clientdata(client);
int val, i, std;
- v4l_dbg(1, client, "msp3410 daemon started\n");
+ v4l_dbg(1, msp_debug, client, "msp3410 daemon started\n");
for (;;) {
- v4l_dbg(2, client, "msp3410 thread: sleep\n");
+ v4l_dbg(2, msp_debug, client, "msp3410 thread: sleep\n");
msp_sleep(state,-1);
- v4l_dbg(2, client, "msp3410 thread: wakeup\n");
+ v4l_dbg(2, msp_debug, client, "msp3410 thread: wakeup\n");
restart:
- v4l_dbg(1, client, "thread: restart scan\n");
+ v4l_dbg(1, msp_debug, client, "thread: restart scan\n");
state->restart = 0;
if (kthread_should_stop())
break;
if (state->mode == MSP_MODE_EXTERN) {
/* no carrier scan needed, just unmute */
- v4l_dbg(1, client, "thread: no carrier scan\n");
+ v4l_dbg(1, msp_debug, client, "thread: no carrier scan\n");
msp_set_audio(client);
continue;
}
std = (state->v4l2_std & V4L2_STD_NTSC) ? 0x20 : 1;
state->watch_stereo = 0;
- if (debug)
- v4l_dbg(1, client, "setting standard: %s (0x%04x)\n",
+ if (msp_debug)
+ v4l_dbg(1, msp_debug, client, "setting standard: %s (0x%04x)\n",
msp_standard_std_name(std), std);
if (std != 1) {
val = msp_read_dem(client, 0x7e);
if (val < 0x07ff)
break;
- v4l_dbg(1, client, "detection still in progress\n");
+ v4l_dbg(1, msp_debug, client, "detection still in progress\n");
}
}
for (i = 0; msp_stdlist[i].name != NULL; i++)
if (msp_stdlist[i].retval == val)
break;
- v4l_dbg(1, client, "current standard: %s (0x%04x)\n",
+ v4l_dbg(1, msp_debug, client, "current standard: %s (0x%04x)\n",
msp_standard_std_name(val), val);
state->main = msp_stdlist[i].main;
state->second = msp_stdlist[i].second;
state->std = val;
- if (amsound && !state->radio && (state->v4l2_std & V4L2_STD_SECAM) &&
+ if (msp_amsound && !state->radio && (state->v4l2_std & V4L2_STD_SECAM) &&
(val != 0x0009)) {
/* autodetection has failed, let backup */
- v4l_dbg(1, client, "autodetection failed,"
+ v4l_dbg(1, msp_debug, client, "autodetection failed,"
" switching to backup standard: %s (0x%04x)\n",
msp_stdlist[8].name ? msp_stdlist[8].name : "unknown",val);
val = 0x0009;
watch_stereo(client);
}
}
- v4l_dbg(1, client, "thread: exit\n");
+ v4l_dbg(1, msp_debug, client, "thread: exit\n");
return 0;
}
/* ----------------------------------------------------------------------- */
-/* msp34xxG + (autoselect no-thread) */
+/* msp34xxG + (autoselect no-thread) */
/* this one uses both automatic standard detection and automatic sound */
/* select which are available in the newer G versions */
/* struct msp: only norm, acb and source are really used in this mode */
*/
int value = (source & 0x07) << 8 | (source == 0 ? 0x30 : 0x20);
- v4l_dbg(1, client, "set source to %d (0x%x)\n", source, value);
+ v4l_dbg(1, msp_debug, client, "set source to %d (0x%x)\n", source, value);
/* Loudspeaker Output */
msp_write_dsp(client, 0x08, value);
/* SCART1 DA Output */
* 0x7f0 = forced mono mode
*/
/* a2 threshold for stereo/bilingual */
- msp_write_dem(client, 0x22, stereo_threshold);
+ msp_write_dem(client, 0x22, msp_stereo_thresh);
state->source = source;
}
struct msp_state *state = i2c_get_clientdata(client);
int val, std, i;
- v4l_dbg(1, client, "msp34xxg daemon started\n");
+ v4l_dbg(1, msp_debug, client, "msp34xxg daemon started\n");
state->source = 1; /* default */
for (;;) {
- v4l_dbg(2, client, "msp34xxg thread: sleep\n");
+ v4l_dbg(2, msp_debug, client, "msp34xxg thread: sleep\n");
msp_sleep(state, -1);
- v4l_dbg(2, client, "msp34xxg thread: wakeup\n");
+ v4l_dbg(2, msp_debug, client, "msp34xxg thread: wakeup\n");
restart:
- v4l_dbg(1, client, "thread: restart scan\n");
+ v4l_dbg(1, msp_debug, client, "thread: restart scan\n");
state->restart = 0;
if (kthread_should_stop())
break;
/* setup the chip*/
msp34xxg_reset(client);
- std = standard;
+ std = msp_standard;
if (std != 0x01)
goto unmute;
/* watch autodetect */
- v4l_dbg(1, client, "triggered autodetect, waiting for result\n");
+ v4l_dbg(1, msp_debug, client, "triggered autodetect, waiting for result\n");
for (i = 0; i < 10; i++) {
if (msp_sleep(state, 100))
goto restart;
std = val;
break;
}
- v4l_dbg(2, client, "detection still in progress\n");
+ v4l_dbg(2, msp_debug, client, "detection still in progress\n");
}
if (std == 1) {
- v4l_dbg(1, client, "detection still in progress after 10 tries. giving up.\n");
+ v4l_dbg(1, msp_debug, client, "detection still in progress after 10 tries. giving up.\n");
continue;
}
unmute:
state->std = std;
- v4l_dbg(1, client, "current standard: %s (0x%04x)\n",
+ v4l_dbg(1, msp_debug, client, "current standard: %s (0x%04x)\n",
msp_standard_std_name(std), std);
/* unmute: dispatch sound to scart output, set scart volume */
msp_write_dem(client, 0x40, state->i2s_mode);
}
- v4l_dbg(1, client, "thread: exit\n");
+ v4l_dbg(1, msp_debug, client, "thread: exit\n");
return 0;
}
* this is a problem, I'll handle SAP just like lang1/lang2.
*/
}
- v4l_dbg(1, client, "status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n",
+ v4l_dbg(1, msp_debug, client, "status=0x%x, stereo=%d, bilingual=%d -> rxsubchans=%d\n",
status, is_stereo, is_bilingual, state->rxsubchans);
}
#define OPMODE_AUTOSELECT 2 /* use autodetect & autoselect (>= msp34xxG) */
/* module parameters */
-extern int debug;
-extern int once;
-extern int amsound;
-extern int standard;
-extern int dolby;
-extern int stereo_threshold;
+extern int msp_debug;
+extern int msp_once;
+extern int msp_amsound;
+extern int msp_standard;
+extern int msp_dolby;
+extern int msp_stereo_thresh;
struct msp_state {
int rev1, rev2;
u32 hz;
u64 f;
- v4l_dbg(1, client, "set audio clock freq: %d\n", freq);
+ v4l_dbg(1, debug, client, "set audio clock freq: %d\n", freq);
/* sanity check */
if (freq < 32000 || freq > 48000)
// This works for NTSC-M, SECAM-L and the 50Hz PAL variants.
if (std & V4L2_STD_525_60) {
- v4l_dbg(1, client, "decoder set standard 60 Hz\n");
+ v4l_dbg(1, debug, client, "decoder set standard 60 Hz\n");
saa7115_writeregs(client, saa7115_cfg_60hz_video);
} else {
- v4l_dbg(1, client, "decoder set standard 50 Hz\n");
+ v4l_dbg(1, debug, client, "decoder set standard 50 Hz\n");
saa7115_writeregs(client, saa7115_cfg_50hz_video);
}
pix = &(fmt->fmt.pix);
- v4l_dbg(1, client, "decoder set size\n");
+ v4l_dbg(1, debug, client, "decoder set size\n");
/* FIXME need better bounds checking here */
if ((pix->width < 1) || (pix->width > 1440))
HPSC = HPSC ? HPSC : 1;
HFSC = (int)((1024 * 720) / (HPSC * pix->width));
- v4l_dbg(1, client, "Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC);
+ v4l_dbg(1, debug, client, "Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC);
/* FIXME hardcodes to "Task B"
* write H prescaler integer */
saa7115_write(client, 0xd0, (u8) (HPSC & 0x3f));
saa7115_write(client, 0xDD, (u8) ((HFSC >> 9) & 0xff));
} else {
if (is_50hz) {
- v4l_dbg(1, client, "Setting full 50hz width\n");
+ v4l_dbg(1, debug, client, "Setting full 50hz width\n");
saa7115_writeregs(client, saa7115_cfg_50hz_fullres_x);
} else {
- v4l_dbg(1, client, "Setting full 60hz width\n");
+ v4l_dbg(1, debug, client, "Setting full 60hz width\n");
saa7115_writeregs(client, saa7115_cfg_60hz_fullres_x);
}
}
if (pix->height != Vsrc) {
VSCY = (int)((1024 * Vsrc) / pix->height);
- v4l_dbg(1, client, "Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY);
+ v4l_dbg(1, debug, client, "Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY);
/* Correct Contrast and Luminance */
saa7115_write(client, 0xd5, (u8) (64 * 1024 / VSCY));
saa7115_write(client, 0xe3, (u8) ((VSCY >> 8) & 0xff));
} else {
if (is_50hz) {
- v4l_dbg(1, client, "Setting full 50Hz height\n");
+ v4l_dbg(1, debug, client, "Setting full 50Hz height\n");
saa7115_writeregs(client, saa7115_cfg_50hz_fullres_y);
} else {
- v4l_dbg(1, client, "Setting full 60hz height\n");
+ v4l_dbg(1, debug, client, "Setting full 60hz height\n");
saa7115_writeregs(client, saa7115_cfg_60hz_fullres_y);
}
}
break;
status = saa7115_read(client, 0x1f);
- v4l_dbg(1, client, "status: 0x%02x\n", status);
+ v4l_dbg(1, debug, client, "status: 0x%02x\n", status);
vt->signal = ((status & (1 << 6)) == 0) ? 0xffff : 0x0;
break;
}
break;
case VIDIOC_S_INPUT:
- v4l_dbg(1, client, "decoder set input %d\n", *iarg);
+ v4l_dbg(1, debug, client, "decoder set input %d\n", *iarg);
/* inputs from 0-9 are available */
if (*iarg < 0 || *iarg > 9) {
return -EINVAL;
if (state->input == *iarg)
break;
- v4l_dbg(1, client, "now setting %s input\n",
+ v4l_dbg(1, debug, client, "now setting %s input\n",
*iarg >= 6 ? "S-Video" : "Composite");
state->input = *iarg;
case VIDIOC_STREAMON:
case VIDIOC_STREAMOFF:
- v4l_dbg(1, client, "%s output\n",
+ v4l_dbg(1, debug, client, "%s output\n",
(cmd == VIDIOC_STREAMON) ? "enable" : "disable");
if (state->enable != (cmd == VIDIOC_STREAMON)) {
break;
case VIDIOC_INT_RESET:
- v4l_dbg(1, client, "decoder RESET\n");
+ v4l_dbg(1, debug, client, "decoder RESET\n");
saa7115_writeregs(client, saa7115_cfg_reset_scaler);
break;
client->driver = &i2c_driver_saa7115;
snprintf(client->name, sizeof(client->name) - 1, "saa7115");
- v4l_dbg(1, client, "detecting saa7115 client on address 0x%x\n", address << 1);
+ v4l_dbg(1, debug, client, "detecting saa7115 client on address 0x%x\n", address << 1);
saa7115_write(client, 0, 5);
chip_id = saa7115_read(client, 0) & 0x0f;
if (chip_id != 4 && chip_id != 5) {
- v4l_dbg(1, client, "saa7115 not found\n");
+ v4l_dbg(1, debug, client, "saa7115 not found\n");
kfree(client);
return 0;
}
state->ident = (chip_id == 4) ? V4L2_IDENT_SAA7114 : V4L2_IDENT_SAA7115;
state->audclk_freq = 48000;
- v4l_dbg(1, client, "writing init values\n");
+ v4l_dbg(1, debug, client, "writing init values\n");
/* init to 60hz/48khz */
saa7115_writeregs(client, saa7115_init_auto_input);
i2c_attach_client(client);
- v4l_dbg(1, client, "status: (1E) 0x%02x, (1F) 0x%02x\n",
+ v4l_dbg(1, debug, client, "status: (1E) 0x%02x, (1F) 0x%02x\n",
saa7115_read(client, 0x1e), saa7115_read(client, 0x1f));
return 0;
if (enable && (data->field != 0 || data->line != 16))
return -EINVAL;
if (state->vps_enable != enable) {
- v4l_dbg(1, client, "Turn VPS Signal %s\n", enable ? "on" : "off");
+ v4l_dbg(1, debug, client, "Turn VPS Signal %s\n", enable ? "on" : "off");
saa7127_write(client, 0x54, enable << 7);
state->vps_enable = enable;
}
state->vps_data[2] = data->data[11];
state->vps_data[3] = data->data[12];
state->vps_data[4] = data->data[13];
- v4l_dbg(1, client, "Set VPS data %02x %02x %02x %02x %02x\n",
+ v4l_dbg(1, debug, client, "Set VPS data %02x %02x %02x %02x %02x\n",
state->vps_data[0], state->vps_data[1],
state->vps_data[2], state->vps_data[3],
state->vps_data[4]);
if (enable && (data->field != 0 || data->line != 21))
return -EINVAL;
if (state->cc_enable != enable) {
- v4l_dbg(1, client, "Turn CC %s\n", enable ? "on" : "off");
+ v4l_dbg(1, debug, client, "Turn CC %s\n", enable ? "on" : "off");
saa7127_write(client, SAA7127_REG_CLOSED_CAPTION,
(state->xds_enable << 7) | (enable << 6) | 0x11);
state->cc_enable = enable;
if (!enable)
return 0;
- v4l_dbg(2, client, "CC data: %04x\n", cc);
+ v4l_dbg(2, debug, client, "CC data: %04x\n", cc);
saa7127_write(client, SAA7127_REG_LINE_21_ODD_0, cc & 0xff);
saa7127_write(client, SAA7127_REG_LINE_21_ODD_1, cc >> 8);
state->cc_data = cc;
if (enable && (data->field != 1 || data->line != 21))
return -EINVAL;
if (state->xds_enable != enable) {
- v4l_dbg(1, client, "Turn XDS %s\n", enable ? "on" : "off");
+ v4l_dbg(1, debug, client, "Turn XDS %s\n", enable ? "on" : "off");
saa7127_write(client, SAA7127_REG_CLOSED_CAPTION,
(enable << 7) | (state->cc_enable << 6) | 0x11);
state->xds_enable = enable;
if (!enable)
return 0;
- v4l_dbg(2, client, "XDS data: %04x\n", xds);
+ v4l_dbg(2, debug, client, "XDS data: %04x\n", xds);
saa7127_write(client, SAA7127_REG_LINE_21_EVEN_0, xds & 0xff);
saa7127_write(client, SAA7127_REG_LINE_21_EVEN_1, xds >> 8);
state->xds_data = xds;
if (enable && (data->field != 0 || data->line != 23))
return -EINVAL;
if (state->wss_enable != enable) {
- v4l_dbg(1, client, "Turn WSS %s\n", enable ? "on" : "off");
+ v4l_dbg(1, debug, client, "Turn WSS %s\n", enable ? "on" : "off");
saa7127_write(client, 0x27, enable << 7);
state->wss_enable = enable;
}
saa7127_write(client, 0x26, data->data[0]);
saa7127_write(client, 0x27, 0x80 | (data->data[1] & 0x3f));
- v4l_dbg(1, client, "WSS mode: %s\n", wss_strs[data->data[0] & 0xf]);
+ v4l_dbg(1, debug, client, "WSS mode: %s\n", wss_strs[data->data[0] & 0xf]);
state->wss_mode = (data->data[1] & 0x3f) << 8 | data->data[0];
return 0;
}
struct saa7127_state *state = i2c_get_clientdata(client);
if (enable) {
- v4l_dbg(1, client, "Enable Video Output\n");
+ v4l_dbg(1, debug, client, "Enable Video Output\n");
saa7127_write(client, 0x2d, state->reg_2d);
saa7127_write(client, 0x61, state->reg_61);
} else {
- v4l_dbg(1, client, "Disable Video Output\n");
+ v4l_dbg(1, debug, client, "Disable Video Output\n");
saa7127_write(client, 0x2d, (state->reg_2d & 0xf0));
saa7127_write(client, 0x61, (state->reg_61 | 0xc0));
}
const struct i2c_reg_value *inittab;
if (std & V4L2_STD_525_60) {
- v4l_dbg(1, client, "Selecting 60 Hz video Standard\n");
+ v4l_dbg(1, debug, client, "Selecting 60 Hz video Standard\n");
inittab = saa7127_init_config_60hz;
state->reg_61 = SAA7127_60HZ_DAC_CONTROL;
} else {
- v4l_dbg(1, client, "Selecting 50 Hz video Standard\n");
+ v4l_dbg(1, debug, client, "Selecting 50 Hz video Standard\n");
inittab = saa7127_init_config_50hz;
state->reg_61 = SAA7127_50HZ_DAC_CONTROL;
}
default:
return -EINVAL;
}
- v4l_dbg(1, client, "Selecting %s output type\n", output_strs[output]);
+ v4l_dbg(1, debug, client, "Selecting %s output type\n", output_strs[output]);
/* Configure Encoder */
saa7127_write(client, 0x2d, state->reg_2d);
switch (input) {
case SAA7127_INPUT_TYPE_NORMAL: /* avia */
- v4l_dbg(1, client, "Selecting Normal Encoder Input\n");
+ v4l_dbg(1, debug, client, "Selecting Normal Encoder Input\n");
state->reg_3a_cb = 0;
break;
case SAA7127_INPUT_TYPE_TEST_IMAGE: /* color bar */
- v4l_dbg(1, client, "Selecting Color Bar generator\n");
+ v4l_dbg(1, debug, client, "Selecting Color Bar generator\n");
state->reg_3a_cb = 0x80;
break;
client->driver = &i2c_driver_saa7127;
snprintf(client->name, sizeof(client->name) - 1, "saa7127");
- v4l_dbg(1, client, "detecting saa7127 client on address 0x%x\n", address << 1);
+ v4l_dbg(1, debug, client, "detecting saa7127 client on address 0x%x\n", address << 1);
/* First test register 0: Bits 5-7 are a version ID (should be 0),
and bit 2 should also be 0.
0x1d after a reset and not expected to ever change. */
if ((saa7127_read(client, 0) & 0xe4) != 0 ||
(saa7127_read(client, 0x29) & 0x3f) != 0x1d) {
- v4l_dbg(1, client, "saa7127 not found\n");
+ v4l_dbg(1, debug, client, "saa7127 not found\n");
kfree(client);
return 0;
}
/* Configure Encoder */
- v4l_dbg(1, client, "Configuring encoder\n");
+ v4l_dbg(1, debug, client, "Configuring encoder\n");
saa7127_write_inittab(client, saa7127_init_config_common);
saa7127_set_std(client, V4L2_STD_NTSC);
saa7127_set_output_type(client, SAA7127_OUTPUT_TYPE_BOTH);
static int tda7432_write(struct i2c_client *client, int subaddr, int val)
{
unsigned char buffer[2];
- v4l_dbg(2,client,"In tda7432_write\n");
- v4l_dbg(1,client,"Writing %d 0x%x\n", subaddr, val);
+ v4l_dbg(2, debug,client,"In tda7432_write\n");
+ v4l_dbg(1, debug,client,"Writing %d 0x%x\n", subaddr, val);
buffer[0] = subaddr;
buffer[1] = val;
if (2 != i2c_master_send(client,buffer,2)) {
{
struct tda7432 *t = i2c_get_clientdata(client);
unsigned char buf[16];
- v4l_dbg(2,client,"In tda7432_set\n");
+ v4l_dbg(2, debug,client,"In tda7432_set\n");
- v4l_dbg(1,client,
+ v4l_dbg(1, debug,client,
"tda7432: 7432_set(0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x)\n",
t->input,t->volume,t->bass,t->treble,t->lf,t->lr,t->rf,t->rr,t->loud);
buf[0] = TDA7432_IN;
static void do_tda7432_init(struct i2c_client *client)
{
struct tda7432 *t = i2c_get_clientdata(client);
- v4l_dbg(2,client,"In tda7432_init\n");
+ v4l_dbg(2, debug,client,"In tda7432_init\n");
t->input = TDA7432_STEREO_IN | /* Main (stereo) input */
TDA7432_BASS_SYM | /* Symmetric bass cut */
unsigned int cmd, void *arg)
{
struct tda7432 *t = i2c_get_clientdata(client);
- v4l_dbg(2,client,"In tda7432_command\n");
+ v4l_dbg(2, debug,client,"In tda7432_command\n");
if (debug>1)
v4l_i2c_print_ioctl(client,cmd);
unsigned char buffer[2];
if (-1 == subaddr) {
- v4l_dbg(1, &chip->c, "%s: chip_write: 0x%x\n",
+ v4l_dbg(1, debug, &chip->c, "%s: chip_write: 0x%x\n",
chip->c.name, val);
chip->shadow.bytes[1] = val;
buffer[0] = val;
return -1;
}
} else {
- v4l_dbg(1, &chip->c, "%s: chip_write: reg%d=0x%x\n",
+ v4l_dbg(1, debug, &chip->c, "%s: chip_write: reg%d=0x%x\n",
chip->c.name, subaddr, val);
chip->shadow.bytes[subaddr+1] = val;
buffer[0] = subaddr;
chip->c.name);
return -1;
}
- v4l_dbg(1, &chip->c, "%s: chip_read: 0x%x\n",chip->c.name, buffer);
+ v4l_dbg(1, debug, &chip->c, "%s: chip_read: 0x%x\n",chip->c.name, buffer);
return buffer;
}
v4l_warn(&chip->c, "%s: I/O error (read2)\n", chip->c.name);
return -1;
}
- v4l_dbg(1, &chip->c, "%s: chip_read2: reg%d=0x%x\n",
+ v4l_dbg(1, debug, &chip->c, "%s: chip_read2: reg%d=0x%x\n",
chip->c.name, subaddr,read[0]);
return read[0];
}
return 0;
/* update our shadow register set; print bytes if (debug > 0) */
- v4l_dbg(1, &chip->c, "%s: chip_cmd(%s): reg=%d, data:",
+ v4l_dbg(1, debug, &chip->c, "%s: chip_cmd(%s): reg=%d, data:",
chip->c.name, name,cmd->bytes[0]);
for (i = 1; i < cmd->count; i++) {
if (debug)
daemonize("%s", chip->c.name);
allow_signal(SIGTERM);
- v4l_dbg(1, &chip->c, "%s: thread started\n", chip->c.name);
+ v4l_dbg(1, debug, &chip->c, "%s: thread started\n", chip->c.name);
for (;;) {
add_wait_queue(&chip->wq, &wait);
try_to_freeze();
if (chip->done || signal_pending(current))
break;
- v4l_dbg(1, &chip->c, "%s: thread wakeup\n", chip->c.name);
+ v4l_dbg(1, debug, &chip->c, "%s: thread wakeup\n", chip->c.name);
/* don't do anything for radio or if mode != auto */
if (chip->radio || chip->mode != 0)
mod_timer(&chip->wt, jiffies+2*HZ);
}
- v4l_dbg(1, &chip->c, "%s: thread exiting\n", chip->c.name);
+ v4l_dbg(1, debug, &chip->c, "%s: thread exiting\n", chip->c.name);
complete_and_exit(&chip->texit, 0);
return 0;
}
if (mode == chip->prevmode)
return;
- v4l_dbg(1, &chip->c, "%s: thread checkmode\n", chip->c.name);
+ v4l_dbg(1, debug, &chip->c, "%s: thread checkmode\n", chip->c.name);
chip->prevmode = mode;
if (mode & VIDEO_SOUND_STEREO)
if (val & TDA9840_ST_STEREO)
mode |= VIDEO_SOUND_STEREO;
- v4l_dbg(1, &chip->c, "tda9840_getmode(): raw chip read: %d, return: %d\n",
+ v4l_dbg(1, debug, &chip->c, "tda9840_getmode(): raw chip read: %d, return: %d\n",
val, mode);
return mode;
}
mode |= VIDEO_SOUND_STEREO;
if (val & TDA9873_DUAL)
mode |= VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
- v4l_dbg(1, &chip->c, "tda9873_getmode(): raw chip read: %d, return: %d\n",
+ v4l_dbg(1, debug, &chip->c, "tda9873_getmode(): raw chip read: %d, return: %d\n",
val, mode);
return mode;
}
/* int adj_data = chip->shadow.bytes[TDA9873_AD+1] ; */
if ((sw_data & TDA9873_INP_MASK) != TDA9873_INTERNAL) {
- v4l_dbg(1, &chip->c, "tda9873_setmode(): external input\n");
+ v4l_dbg(1, debug, &chip->c, "tda9873_setmode(): external input\n");
return;
}
- v4l_dbg(1, &chip->c, "tda9873_setmode(): chip->shadow.bytes[%d] = %d\n", TDA9873_SW+1, chip->shadow.bytes[TDA9873_SW+1]);
- v4l_dbg(1, &chip->c, "tda9873_setmode(): sw_data = %d\n", sw_data);
+ v4l_dbg(1, debug, &chip->c, "tda9873_setmode(): chip->shadow.bytes[%d] = %d\n", TDA9873_SW+1, chip->shadow.bytes[TDA9873_SW+1]);
+ v4l_dbg(1, debug, &chip->c, "tda9873_setmode(): sw_data = %d\n", sw_data);
switch (mode) {
case VIDEO_SOUND_MONO:
}
chip_write(chip, TDA9873_SW, sw_data);
- v4l_dbg(1, &chip->c, "tda9873_setmode(): req. mode %d; chip_write: %d\n",
+ v4l_dbg(1, debug, &chip->c, "tda9873_setmode(): req. mode %d; chip_write: %d\n",
mode, sw_data);
}
chip_write(chip, TDA9874A_SDACOSR, (tda9874a_mode) ? 0x81:0x80);
chip_write(chip, TDA9874A_AOSR, 0x00); /* or 0x10 */
}
- v4l_dbg(1, &chip->c, "tda9874a_setup(): %s [0x%02X].\n",
+ v4l_dbg(1, debug, &chip->c, "tda9874a_setup(): %s [0x%02X].\n",
tda9874a_modelist[tda9874a_STD].name,tda9874a_STD);
return 1;
}
mode |= VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
}
- v4l_dbg(1, &chip->c, "tda9874a_getmode(): DSR=0x%X, NSR=0x%X, NECR=0x%X, return: %d.\n",
+ v4l_dbg(1, debug, &chip->c, "tda9874a_getmode(): DSR=0x%X, NSR=0x%X, NECR=0x%X, return: %d.\n",
dsr, nsr, necr, mode);
return mode;
}
chip_write(chip, TDA9874A_AOSR, aosr);
chip_write(chip, TDA9874A_MDACOSR, mdacosr);
- v4l_dbg(1, &chip->c, "tda9874a_setmode(): req. mode %d; AOSR=0x%X, MDACOSR=0x%X.\n",
+ v4l_dbg(1, debug, &chip->c, "tda9874a_setmode(): req. mode %d; AOSR=0x%X, MDACOSR=0x%X.\n",
mode, aosr, mdacosr);
} else { /* dic == 0x07 */
chip_write(chip, TDA9874A_FMMR, fmmr);
chip_write(chip, TDA9874A_AOSR, aosr);
- v4l_dbg(1, &chip->c, "tda9874a_setmode(): req. mode %d; FMMR=0x%X, AOSR=0x%X.\n",
+ v4l_dbg(1, debug, &chip->c, "tda9874a_setmode(): req. mode %d; FMMR=0x%X, AOSR=0x%X.\n",
mode, fmmr, aosr);
}
}
if(-1 == (sic = chip_read2(chip,TDA9874A_SIC)))
return 0;
- v4l_dbg(1, &chip->c, "tda9874a_checkit(): DIC=0x%X, SIC=0x%X.\n", dic, sic);
+ v4l_dbg(1, debug, &chip->c, "tda9874a_checkit(): DIC=0x%X, SIC=0x%X.\n", dic, sic);
if((dic == 0x11)||(dic == 0x07)) {
v4l_info(&chip->c, "found tda9874%s.\n", (dic == 0x11) ? "a":"h");
}else if (!(val & TA8874Z_B0)){
mode |= VIDEO_SOUND_STEREO;
}
- /* v4l_dbg(1, &chip->c, "ta8874z_getmode(): raw chip read: 0x%02x, return: 0x%02x\n", val, mode); */
+ /* v4l_dbg(1, debug, &chip->c, "ta8874z_getmode(): raw chip read: 0x%02x, return: 0x%02x\n", val, mode); */
return mode;
}
{
int update = 1;
audiocmd *t = NULL;
- v4l_dbg(1, &chip->c, "ta8874z_setmode(): mode: 0x%02x\n", mode);
+ v4l_dbg(1, debug, &chip->c, "ta8874z_setmode(): mode: 0x%02x\n", mode);
switch(mode){
case VIDEO_SOUND_MONO:
i2c_set_clientdata(&chip->c, chip);
/* find description for the chip */
- v4l_dbg(1, &chip->c, "chip found @ 0x%x\n", addr<<1);
+ v4l_dbg(1, debug, &chip->c, "chip found @ 0x%x\n", addr<<1);
for (desc = chiplist; desc->name != NULL; desc++) {
if (0 == *(desc->insmodopt))
continue;
break;
}
if (desc->name == NULL) {
- v4l_dbg(1, &chip->c, "no matching chip description found\n");
+ v4l_dbg(1, debug, &chip->c, "no matching chip description found\n");
return -EIO;
}
v4l_info(&chip->c, "%s found @ 0x%x (%s)\n", desc->name, addr<<1, adap->name);
if (desc->flags) {
- v4l_dbg(1, &chip->c, "matches:%s%s%s.\n",
+ v4l_dbg(1, debug, &chip->c, "matches:%s%s%s.\n",
(desc->flags & CHIP_HAS_VOLUME) ? " volume" : "",
(desc->flags & CHIP_HAS_BASSTREBLE) ? " bass/treble" : "",
(desc->flags & CHIP_HAS_INPUTSEL) ? " audiomux" : "");
struct CHIPSTATE *chip = i2c_get_clientdata(client);
struct CHIPDESC *desc = chiplist + chip->type;
- v4l_dbg(1, &chip->c, "%s: chip_command 0x%x\n", chip->c.name, cmd);
+ v4l_dbg(1, debug, &chip->c, "%s: chip_command 0x%x\n", chip->c.name, cmd);
switch (cmd) {
case AUDC_SET_INPUT:
/* These three macros assume that the debug level is set with a module
parameter called 'debug'. */
-#define v4l_dbg(level, client, fmt, arg...) \
+#define v4l_dbg(level, debug, client, fmt, arg...) \
do { \
- extern int debug; \
if (debug >= (level)) \
v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \
} while (0)
projects / openwrt / staging / blogic.git / commitdiff