mmc: sunxi: Factor out clock phase setting code into a helper function
authorHans de Goede <hdegoede@redhat.com>
Sat, 30 Jul 2016 14:25:46 +0000 (16:25 +0200)
committerUlf Hansson <ulf.hansson@linaro.org>
Mon, 26 Sep 2016 19:31:05 +0000 (21:31 +0200)
Add a sunxi_mmc_clk_set_phase() helper function.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
drivers/mmc/host/sunxi-mmc.c

index 84bbf43390d4019860ac6ef0e7df35c32261ccdf..af30d87a56db2f7a7761597012e5f34f0c6b259e 100644 (file)
@@ -657,12 +657,39 @@ static int sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en)
        return 0;
 }
 
+static int sunxi_mmc_clk_set_phase(struct sunxi_mmc_host *host,
+                                  struct mmc_ios *ios, u32 rate)
+{
+       int index;
+
+       /* determine delays */
+       if (rate <= 400000) {
+               index = SDXC_CLK_400K;
+       } else if (rate <= 25000000) {
+               index = SDXC_CLK_25M;
+       } else if (rate <= 52000000) {
+               if (ios->timing != MMC_TIMING_UHS_DDR50 &&
+                   ios->timing != MMC_TIMING_MMC_DDR52) {
+                       index = SDXC_CLK_50M;
+               } else if (ios->bus_width == MMC_BUS_WIDTH_8) {
+                       index = SDXC_CLK_50M_DDR_8BIT;
+               } else {
+                       index = SDXC_CLK_50M_DDR;
+               }
+       } else {
+               return -EINVAL;
+       }
+
+       clk_set_phase(host->clk_sample, host->cfg->clk_delays[index].sample);
+       clk_set_phase(host->clk_output, host->cfg->clk_delays[index].output);
+
+       return 0;
+}
+
 static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
                                  struct mmc_ios *ios)
 {
-       const struct sunxi_mmc_clk_delay *clk_delays = host->cfg->clk_delays;
-       u32 rate, oclk_dly, rval, sclk_dly;
-       u32 clock = ios->clock;
+       u32 rate, rval, clock = ios->clock;
        int ret;
 
        /* 8 bit DDR requires a higher module clock */
@@ -697,31 +724,9 @@ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
        }
        mmc_writel(host, REG_CLKCR, rval);
 
-       /* determine delays */
-       if (rate <= 400000) {
-               oclk_dly = clk_delays[SDXC_CLK_400K].output;
-               sclk_dly = clk_delays[SDXC_CLK_400K].sample;
-       } else if (rate <= 25000000) {
-               oclk_dly = clk_delays[SDXC_CLK_25M].output;
-               sclk_dly = clk_delays[SDXC_CLK_25M].sample;
-       } else if (rate <= 52000000) {
-               if (ios->timing != MMC_TIMING_UHS_DDR50 &&
-                   ios->timing != MMC_TIMING_MMC_DDR52) {
-                       oclk_dly = clk_delays[SDXC_CLK_50M].output;
-                       sclk_dly = clk_delays[SDXC_CLK_50M].sample;
-               } else if (ios->bus_width == MMC_BUS_WIDTH_8) {
-                       oclk_dly = clk_delays[SDXC_CLK_50M_DDR_8BIT].output;
-                       sclk_dly = clk_delays[SDXC_CLK_50M_DDR_8BIT].sample;
-               } else {
-                       oclk_dly = clk_delays[SDXC_CLK_50M_DDR].output;
-                       sclk_dly = clk_delays[SDXC_CLK_50M_DDR].sample;
-               }
-       } else {
-               return -EINVAL;
-       }
-
-       clk_set_phase(host->clk_sample, sclk_dly);
-       clk_set_phase(host->clk_output, oclk_dly);
+       ret = sunxi_mmc_clk_set_phase(host, ios, rate);
+       if (ret)
+               return ret;
 
        return sunxi_mmc_oclk_onoff(host, 1);
 }