[media] tef6862: clamp frequency

Clamp the frequency to the valid frequency range as per the V4L2 specification.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/radio/tef6862.c b/drivers/media/radio/tef6862.c
index d78afbb08569a6928184d31828b2af958971ccef..06ac69245ca1cde81ddeb5018fae23f84d84e397 100644 (file)
--- a/drivers/media/radio/tef6862.c
+++ b/drivers/media/radio/tef6862.c
@@ -30,8 +30,8 @@
 
 #define FREQ_MUL 16000
 
-#define TEF6862_LO_FREQ (875 * FREQ_MUL / 10)
-#define TEF6862_HI_FREQ (108 * FREQ_MUL)
+#define TEF6862_LO_FREQ (875U * FREQ_MUL / 10)
+#define TEF6862_HI_FREQ (108U * FREQ_MUL)
 
 /* Write mode sub addresses */
 #define WM_SUB_BANDWIDTH       0x0
@@ -104,6 +104,7 @@ static int tef6862_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequen
 {
        struct tef6862_state *state = to_state(sd);
        struct i2c_client *client = v4l2_get_subdevdata(sd);
+       unsigned freq = f->frequency;
        u16 pll;
        u8 i2cmsg[3];
        int err;
@@ -111,7 +112,8 @@ static int tef6862_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequen
        if (f->tuner != 0)
                return -EINVAL;
 
-       pll = 1964 + ((f->frequency - TEF6862_LO_FREQ) * 20) / FREQ_MUL;
+       clamp(freq, TEF6862_LO_FREQ, TEF6862_HI_FREQ);
+       pll = 1964 + ((freq - TEF6862_LO_FREQ) * 20) / FREQ_MUL;
        i2cmsg[0] = (MODE_PRESET << MODE_SHIFT) | WM_SUB_PLLM;
        i2cmsg[1] = (pll >> 8) & 0xff;
        i2cmsg[2] = pll & 0xff;
@@ -120,7 +122,7 @@ static int tef6862_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequen
        if (err != sizeof(i2cmsg))
                return err < 0 ? err : -EIO;
 
-       state->freq = f->frequency;
+       state->freq = freq;
        return 0;
 }