nouveau_hw.o nouveau_calc.o nouveau_bios.o nouveau_i2c.o \
nouveau_display.o nouveau_connector.o nouveau_fbcon.o \
nouveau_dp.o nouveau_ramht.o \
- nouveau_pm.o nouveau_volt.o nouveau_perf.o \
+ nouveau_pm.o nouveau_volt.o nouveau_perf.o nouveau_temp.o \
nv04_timer.o \
nv04_mc.o nv40_mc.o nv50_mc.o \
nv04_fb.o nv10_fb.o nv30_fb.o nv40_fb.o nv50_fb.o nvc0_fb.o \
nv04_crtc.o nv04_display.o nv04_cursor.o nv04_fbcon.o \
nv10_gpio.o nv50_gpio.o \
nv50_calc.o \
- nv04_pm.o nv50_pm.o nouveau_temp.o
+ nv04_pm.o nv50_pm.o nva3_pm.o
nouveau-$(CONFIG_DRM_NOUVEAU_DEBUG) += nouveau_debugfs.o
nouveau-$(CONFIG_COMPAT) += nouveau_ioc32.o
u32 id, int khz);
void nv50_pm_clock_set(struct drm_device *, void *);
+/* nva3_pm.c */
+int nva3_pm_clock_get(struct drm_device *, u32 id);
+void *nva3_pm_clock_pre(struct drm_device *, struct nouveau_pm_level *,
+ u32 id, int khz);
+void nva3_pm_clock_set(struct drm_device *, void *);
+
/* nouveau_temp.c */
void nouveau_temp_init(struct drm_device *dev);
void nouveau_temp_fini(struct drm_device *dev);
engine->gpio.get = nv50_gpio_get;
engine->gpio.set = nv50_gpio_set;
engine->gpio.irq_enable = nv50_gpio_irq_enable;
- engine->pm.clock_get = nv50_pm_clock_get;
- engine->pm.clock_pre = nv50_pm_clock_pre;
- engine->pm.clock_set = nv50_pm_clock_set;
+ switch (dev_priv->chipset) {
+ case 0xa3:
+ case 0xa5:
+ case 0xa8:
+ case 0xaf:
+ engine->pm.clock_get = nva3_pm_clock_get;
+ engine->pm.clock_pre = nva3_pm_clock_pre;
+ engine->pm.clock_set = nva3_pm_clock_set;
+ break;
+ default:
+ engine->pm.clock_get = nv50_pm_clock_get;
+ engine->pm.clock_pre = nv50_pm_clock_pre;
+ engine->pm.clock_set = nv50_pm_clock_set;
+ break;
+ }
engine->pm.voltage_get = nouveau_voltage_gpio_get;
engine->pm.voltage_set = nouveau_voltage_gpio_set;
if (dev_priv->chipset >= 0x84)
#include "nouveau_bios.h"
#include "nouveau_pm.h"
-/*XXX: boards using limits 0x40 need fixing, the register layout
- * is correct here, but, there's some other funny magic
- * that modifies things, so it's not likely we'll set/read
- * the correct timings yet.. working on it...
- */
-
struct nv50_pm_state {
struct nouveau_pm_level *perflvl;
struct pll_lims pll;
if (ret)
return ret;
- if (pll.vco2.maxfreq) {
- reg0 = nv_rd32(dev, pll.reg + 0);
- reg1 = nv_rd32(dev, pll.reg + 4);
- P = (reg0 & 0x00070000) >> 16;
- N = (reg1 & 0x0000ff00) >> 8;
- M = (reg1 & 0x000000ff);
-
- return ((pll.refclk * N / M) >> P);
- }
+ reg0 = nv_rd32(dev, pll.reg + 0);
+ reg1 = nv_rd32(dev, pll.reg + 4);
+ P = (reg0 & 0x00070000) >> 16;
+ N = (reg1 & 0x0000ff00) >> 8;
+ M = (reg1 & 0x000000ff);
- reg0 = nv_rd32(dev, pll.reg + 4);
- P = (reg0 & 0x003f0000) >> 16;
- N = (reg0 & 0x0000ff00) >> 8;
- M = (reg0 & 0x000000ff);
- return pll.refclk * N / M / P;
+ return ((pll.refclk * N / M) >> P);
}
void *
nouveau_bios_run_init_table(dev, perflvl->memscript, NULL);
}
- if (state->pll.vco2.maxfreq) {
- if (state->type == PLL_MEMORY) {
- nv_wr32(dev, 0x100210, 0);
- nv_wr32(dev, 0x1002dc, 1);
- }
-
- tmp = nv_rd32(dev, reg + 0) & 0xfff8ffff;
- tmp |= 0x80000000 | (P << 16);
- nv_wr32(dev, reg + 0, tmp);
- nv_wr32(dev, reg + 4, (N << 8) | M);
-
- if (state->type == PLL_MEMORY) {
- nv_wr32(dev, 0x1002dc, 0);
- nv_wr32(dev, 0x100210, 0x80000000);
- }
- } else {
- nv_wr32(dev, reg + 4, (P << 16) | (N << 8) | M);
+ if (state->type == PLL_MEMORY) {
+ nv_wr32(dev, 0x100210, 0);
+ nv_wr32(dev, 0x1002dc, 1);
+ }
+
+ tmp = nv_rd32(dev, reg + 0) & 0xfff8ffff;
+ tmp |= 0x80000000 | (P << 16);
+ nv_wr32(dev, reg + 0, tmp);
+ nv_wr32(dev, reg + 4, (N << 8) | M);
+
+ if (state->type == PLL_MEMORY) {
+ nv_wr32(dev, 0x1002dc, 0);
+ nv_wr32(dev, 0x100210, 0x80000000);
}
kfree(state);
--- /dev/null
+/*
+ * Copyright 2010 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Ben Skeggs
+ */
+
+#include "drmP.h"
+#include "nouveau_drv.h"
+#include "nouveau_bios.h"
+#include "nouveau_pm.h"
+
+/*XXX: boards using limits 0x40 need fixing, the register layout
+ * is correct here, but, there's some other funny magic
+ * that modifies things, so it's not likely we'll set/read
+ * the correct timings yet.. working on it...
+ */
+
+struct nva3_pm_state {
+ struct pll_lims pll;
+ int N, M, P;
+};
+
+int
+nva3_pm_clock_get(struct drm_device *dev, u32 id)
+{
+ struct pll_lims pll;
+ int P, N, M, ret;
+ u32 reg;
+
+ ret = get_pll_limits(dev, id, &pll);
+ if (ret)
+ return ret;
+
+ reg = nv_rd32(dev, pll.reg + 4);
+ P = (reg & 0x003f0000) >> 16;
+ N = (reg & 0x0000ff00) >> 8;
+ M = (reg & 0x000000ff);
+ return pll.refclk * N / M / P;
+}
+
+void *
+nva3_pm_clock_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl,
+ u32 id, int khz)
+{
+ struct nva3_pm_state *state;
+ int dummy, ret;
+
+ state = kzalloc(sizeof(*state), GFP_KERNEL);
+ if (!state)
+ return ERR_PTR(-ENOMEM);
+
+ ret = get_pll_limits(dev, id, &state->pll);
+ if (ret < 0) {
+ kfree(state);
+ return (ret == -ENOENT) ? NULL : ERR_PTR(ret);
+ }
+
+ ret = nv50_calc_pll2(dev, &state->pll, khz, &state->N, &dummy,
+ &state->M, &state->P);
+ if (ret < 0) {
+ kfree(state);
+ return ERR_PTR(ret);
+ }
+
+ return state;
+}
+
+void
+nva3_pm_clock_set(struct drm_device *dev, void *pre_state)
+{
+ struct nva3_pm_state *state = pre_state;
+ u32 reg = state->pll.reg;
+
+ nv_wr32(dev, reg + 4, (state->P << 16) | (state->N << 8) | state->M);
+ kfree(state);
+}
+
projects / openwrt / staging / blogic.git / commitdiff