mmc: core: add driver strength selection when selecting hs400es

The driver strength selection is missed and required when selecting
hs400es. So, It is added here.

Fixes: 81ac2af65793ecf ("mmc: core: implement enhanced strobe support")
Cc: stable@vger.kernel.org
Signed-off-by: Hankyung Yu <hankyung.yu@lge.com>
Signed-off-by: Chanho Min <chanho.min@lge.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index a7eb623f8daa3e610891ffb30157dd5e4dd4e103..36217ad5e9b1fbddb4c5dedf6dd711374fc27497 100644 (file)
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1286,6 +1286,23 @@ out_err:
        return err;
 }
 
+static void mmc_select_driver_type(struct mmc_card *card)
+{
+       int card_drv_type, drive_strength, drv_type;
+
+       card_drv_type = card->ext_csd.raw_driver_strength |
+                       mmc_driver_type_mask(0);
+
+       drive_strength = mmc_select_drive_strength(card,
+                                                  card->ext_csd.hs200_max_dtr,
+                                                  card_drv_type, &drv_type);
+
+       card->drive_strength = drive_strength;
+
+       if (drv_type)
+               mmc_set_driver_type(card->host, drv_type);
+}
+
 static int mmc_select_hs400es(struct mmc_card *card)
 {
        struct mmc_host *host = card->host;
@@ -1341,6 +1358,8 @@ static int mmc_select_hs400es(struct mmc_card *card)
                goto out_err;
        }
 
+       mmc_select_driver_type(card);
+
        /* Switch card to HS400 */
        val = EXT_CSD_TIMING_HS400 |
              card->drive_strength << EXT_CSD_DRV_STR_SHIFT;
@@ -1374,23 +1393,6 @@ out_err:
        return err;
 }
 
-static void mmc_select_driver_type(struct mmc_card *card)
-{
-       int card_drv_type, drive_strength, drv_type;
-
-       card_drv_type = card->ext_csd.raw_driver_strength |
-                       mmc_driver_type_mask(0);
-
-       drive_strength = mmc_select_drive_strength(card,
-                                                  card->ext_csd.hs200_max_dtr,
-                                                  card_drv_type, &drv_type);
-
-       card->drive_strength = drive_strength;
-
-       if (drv_type)
-               mmc_set_driver_type(card->host, drv_type);
-}
-
 /*
  * For device supporting HS200 mode, the following sequence
  * should be done before executing the tuning process.