dt: bindings: Document ZynqMP DDRC in Synopsys documentation

Add information for ZynqMP DDRC which reports the single bit errors that
are corrected and the double bit errors that are detected.

Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rob Herring <robh@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: amit.kucheria@linaro.org
CC: devicetree@vger.kernel.org
CC: leoyang.li@nxp.com
CC: linux-arm-kernel@lists.infradead.org
CC: linux-edac <linux-edac@vger.kernel.org>
CC: mchehab@kernel.org
CC: michal.simek@xilinx.com
CC: sudeep.holla@arm.com
Link: http://lkml.kernel.org/r/1540447621-22870-3-git-send-email-manish.narani@xilinx.com

diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
index a43d26d41e04b7f87586b6b825c4307e6ff9f3ba..9d32762c47e1ba6ef1e9465d635247b533fb3e28 100644 (file)
--- a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt
@@ -1,15 +1,32 @@
 Binding for Synopsys IntelliDDR Multi Protocol Memory Controller
 
-This controller has an optional ECC support in half-bus width (16-bit)
-configuration. The ECC controller corrects one bit error and detects
-two bit errors.
+The ZynqMP DDR ECC controller has an optional ECC support in 64-bit and 32-bit
+bus width configurations.
+
+The Zynq DDR ECC controller has an optional ECC support in half-bus width
+(16-bit) configuration.
+
+These both ECC controllers correct single bit ECC errors and detect double bit
+ECC errors.
 
 Required properties:
- - compatible: Should be 'xlnx,zynq-ddrc-a05'
- - reg: Base address and size of the controllers memory area
+ - compatible: One of:
+       - 'xlnx,zynq-ddrc-a05' : Zynq DDR ECC controller
+       - 'xlnx,zynqmp-ddrc-2.40a' : ZynqMP DDR ECC controller
+ - reg: Should contain DDR controller registers location and length.
+
+Required properties for "xlnx,zynqmp-ddrc-2.40a":
+ - interrupts: Property with a value describing the interrupt number.
 
 Example:
        memory-controller@f8006000 {
                compatible = "xlnx,zynq-ddrc-a05";
                reg = <0xf8006000 0x1000>;
        };
+
+       mc: memory-controller@fd070000 {
+               compatible = "xlnx,zynqmp-ddrc-2.40a";
+               reg = <0x0 0xfd070000 0x0 0x30000>;
+               interrupt-parent = <&gic>;
+               interrupts = <0 112 4>;
+       };