scsi: mpt3sas: fix hang on ata passthrough commands

mpt3sas has a firmware failure where it can only handle one pass through
ATA command at a time.  If another comes in, contrary to the SAT
standard, it will hang until the first one completes (causing long
commands like secure erase to timeout).  The original fix was to block
the device when an ATA command came in, but this caused a regression
with

commit 669f044170d8933c3d66d231b69ea97cb8447338
Author: Bart Van Assche <bart.vanassche@sandisk.com>
Date:   Tue Nov 22 16:17:13 2016 -0800

    scsi: srp_transport: Move queuecommand() wait code to SCSI core

So fix the original fix of the secure erase timeout by properly
returning SAM_STAT_BUSY like the SAT recommends.  The original patch
also had a concurrency problem since scsih_qcmd is lockless at that
point (this is fixed by using atomic bitops to set and test the flag).

[mkp: addressed feedback wrt. test_bit and fixed whitespace]

Fixes: 18f6084a989ba1b (mpt3sas: Fix secure erase premature termination)
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 394fe1338d0976a42f183e328dfaed02f540560f..dcb33f4fa68720624945f4bdc3f5c932e530c86f 100644 (file)
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -393,6 +393,7 @@ struct MPT3SAS_TARGET {
  * @eedp_enable: eedp support enable bit
  * @eedp_type: 0(type_1), 1(type_2), 2(type_3)
  * @eedp_block_length: block size
+ * @ata_command_pending: SATL passthrough outstanding for device
  */
 struct MPT3SAS_DEVICE {
        struct MPT3SAS_TARGET *sas_target;
@@ -404,6 +405,17 @@ struct MPT3SAS_DEVICE {
        u8      ignore_delay_remove;
        /* Iopriority Command Handling */
        u8      ncq_prio_enable;
+       /*
+        * Bug workaround for SATL handling: the mpt2/3sas firmware
+        * doesn't return BUSY or TASK_SET_FULL for subsequent
+        * commands while a SATL pass through is in operation as the
+        * spec requires, it simply does nothing with them until the
+        * pass through completes, causing them possibly to timeout if
+        * the passthrough is a long executing command (like format or
+        * secure erase).  This variable allows us to do the right
+        * thing while a SATL command is pending.
+        */
+       unsigned long ata_command_pending;
 
 };
 

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index b5c966e319d315474b94703b93ab0343013dd973..75f3fce1c86773299704347fc0960fb5148ea53f 100644 (file)
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3899,9 +3899,18 @@ _scsih_temp_threshold_events(struct MPT3SAS_ADAPTER *ioc,
        }
 }
 
-static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd)
+static int _scsih_set_satl_pending(struct scsi_cmnd *scmd, bool pending)
 {
-       return (scmd->cmnd[0] == ATA_12 || scmd->cmnd[0] == ATA_16);
+       struct MPT3SAS_DEVICE *priv = scmd->device->hostdata;
+
+       if (scmd->cmnd[0] != ATA_12 && scmd->cmnd[0] != ATA_16)
+               return 0;
+
+       if (pending)
+               return test_and_set_bit(0, &priv->ata_command_pending);
+
+       clear_bit(0, &priv->ata_command_pending);
+       return 0;
 }
 
 /**
@@ -3925,9 +3934,7 @@ _scsih_flush_running_cmds(struct MPT3SAS_ADAPTER *ioc)
                if (!scmd)
                        continue;
                count++;
-               if (ata_12_16_cmd(scmd))
-                       scsi_internal_device_unblock(scmd->device,
-                                                       SDEV_RUNNING);
+               _scsih_set_satl_pending(scmd, false);
                mpt3sas_base_free_smid(ioc, smid);
                scsi_dma_unmap(scmd);
                if (ioc->pci_error_recovery)
@@ -4063,13 +4070,6 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
        if (ioc->logging_level & MPT_DEBUG_SCSI)
                scsi_print_command(scmd);
 
-       /*
-        * Lock the device for any subsequent command until command is
-        * done.
-        */
-       if (ata_12_16_cmd(scmd))
-               scsi_internal_device_block(scmd->device);
-
        sas_device_priv_data = scmd->device->hostdata;
        if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
                scmd->result = DID_NO_CONNECT << 16;
@@ -4083,6 +4083,19 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
                return 0;
        }
 
+       /*
+        * Bug work around for firmware SATL handling.  The loop
+        * is based on atomic operations and ensures consistency
+        * since we're lockless at this point
+        */
+       do {
+               if (test_bit(0, &sas_device_priv_data->ata_command_pending)) {
+                       scmd->result = SAM_STAT_BUSY;
+                       scmd->scsi_done(scmd);
+                       return 0;
+               }
+       } while (_scsih_set_satl_pending(scmd, true));
+
        sas_target_priv_data = sas_device_priv_data->sas_target;
 
        /* invalid device handle */
@@ -4650,8 +4663,7 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
        if (scmd == NULL)
                return 1;
 
-       if (ata_12_16_cmd(scmd))
-               scsi_internal_device_unblock(scmd->device, SDEV_RUNNING);
+       _scsih_set_satl_pending(scmd, false);
 
        mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);