From: Viresh Kumar Date: Tue, 29 May 2012 22:07:35 +0000 (-0700) Subject: rtc/spear: add Device Tree probing capability X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=0108c4ff62a0ee324c58175ff6b7000865023498;p=openwrt%2Fstaging%2Fblogic.git rtc/spear: add Device Tree probing capability SPEAr platforms now support DT and so must convert all drivers support DT. This patch adds DT probing support for rtc and updates its documentation too. Signed-off-by: Viresh Kumar Cc: Stefan Roese Cc: Arnd Bergmann Cc: Alessandro Zummo Cc: Rajeev Kumar Cc: Rob Herring Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/Documentation/devicetree/bindings/rtc/spear-rtc.txt b/Documentation/devicetree/bindings/rtc/spear-rtc.txt new file mode 100644 index 000000000000..ca67ac62108e --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/spear-rtc.txt @@ -0,0 +1,17 @@ +* SPEAr RTC + +Required properties: +- compatible : "st,spear600-rtc" +- reg : Address range of the rtc registers +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupt: Should contain the rtc interrupt number + +Example: + + rtc@fc000000 { + compatible = "st,spear600-rtc"; + reg = <0xfc000000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <12>; + }; diff --git a/drivers/rtc/rtc-spear.c b/drivers/rtc/rtc-spear.c index e38da0dc4187..1f76320e545b 100644 --- a/drivers/rtc/rtc-spear.c +++ b/drivers/rtc/rtc-spear.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -519,6 +520,14 @@ static void spear_rtc_shutdown(struct platform_device *pdev) clk_disable(config->clk); } +#ifdef CONFIG_OF +static const struct of_device_id spear_rtc_id_table[] = { + { .compatible = "st,spear600-rtc" }, + {} +}; +MODULE_DEVICE_TABLE(of, spear_rtc_id_table); +#endif + static struct platform_driver spear_rtc_driver = { .probe = spear_rtc_probe, .remove = __devexit_p(spear_rtc_remove), @@ -527,6 +536,7 @@ static struct platform_driver spear_rtc_driver = { .shutdown = spear_rtc_shutdown, .driver = { .name = "rtc-spear", + .of_match_table = of_match_ptr(spear_rtc_id_table), }, };