From: Lucas De Marchi Date: Fri, 22 Mar 2019 22:37:50 +0000 (-0700) Subject: drm/i915/icl: use previous pll hw readout X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=02c99d26f5200210c1080f4bf13d344329d85cd8;p=openwrt%2Fstaging%2Fblogic.git drm/i915/icl: use previous pll hw readout By the time icl_ddi_clock_get() is called we've just got the hw state from the pll registers. We don't need to read them again: we can rather reuse what was cached in the dpll_hw_state. While at it, s/refclk/ref_clock/ just to be consistent with the name used in code nearby. Signed-off-by: Lucas De Marchi Link: https://patchwork.freedesktop.org/patch/msgid/20190322223751.22089-5-lucas.demarchi@intel.com Reviewed-by: Ville Syrjälä --- diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 0e8f20d9ab2a..63005239d092 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1374,25 +1374,21 @@ static int icl_calc_tbt_pll_link(struct drm_i915_private *dev_priv, } static int icl_calc_mg_pll_link(struct drm_i915_private *dev_priv, - enum port port) + const struct intel_dpll_hw_state *pll_state) { - enum tc_port tc_port = intel_port_to_tc(dev_priv, port); - u32 mg_pll_div0, mg_clktop_hsclkctl; - u32 m1, m2_int, m2_frac, div1, div2, refclk; + u32 m1, m2_int, m2_frac, div1, div2, ref_clock; u64 tmp; - refclk = dev_priv->cdclk.hw.ref; - - mg_pll_div0 = I915_READ(MG_PLL_DIV0(tc_port)); - mg_clktop_hsclkctl = I915_READ(MG_CLKTOP2_HSCLKCTL(tc_port)); + ref_clock = dev_priv->cdclk.hw.ref; - m1 = I915_READ(MG_PLL_DIV1(tc_port)) & MG_PLL_DIV1_FBPREDIV_MASK; - m2_int = mg_pll_div0 & MG_PLL_DIV0_FBDIV_INT_MASK; - m2_frac = (mg_pll_div0 & MG_PLL_DIV0_FRACNEN_H) ? - (mg_pll_div0 & MG_PLL_DIV0_FBDIV_FRAC_MASK) >> - MG_PLL_DIV0_FBDIV_FRAC_SHIFT : 0; + m1 = pll_state->mg_pll_div1 & MG_PLL_DIV1_FBPREDIV_MASK; + m2_int = pll_state->mg_pll_div0 & MG_PLL_DIV0_FBDIV_INT_MASK; + m2_frac = (pll_state->mg_pll_div0 & MG_PLL_DIV0_FRACNEN_H) ? + (pll_state->mg_pll_div0 & MG_PLL_DIV0_FBDIV_FRAC_MASK) >> + MG_PLL_DIV0_FBDIV_FRAC_SHIFT : 0; - switch (mg_clktop_hsclkctl & MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK) { + switch (pll_state->mg_clktop2_hsclkctl & + MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK) { case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_2: div1 = 2; break; @@ -1406,12 +1402,14 @@ static int icl_calc_mg_pll_link(struct drm_i915_private *dev_priv, div1 = 7; break; default: - MISSING_CASE(mg_clktop_hsclkctl); + MISSING_CASE(pll_state->mg_clktop2_hsclkctl); return 0; } - div2 = (mg_clktop_hsclkctl & MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK) >> + div2 = (pll_state->mg_clktop2_hsclkctl & + MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK) >> MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_SHIFT; + /* div2 value of 0 is same as 1 means no div */ if (div2 == 0) div2 = 1; @@ -1420,8 +1418,8 @@ static int icl_calc_mg_pll_link(struct drm_i915_private *dev_priv, * Adjust the original formula to delay the division by 2^22 in order to * minimize possible rounding errors. */ - tmp = (u64)m1 * m2_int * refclk + - (((u64)m1 * m2_frac * refclk) >> 22); + tmp = (u64)m1 * m2_int * ref_clock + + (((u64)m1 * m2_frac * ref_clock) >> 22); tmp = div_u64(tmp, 5 * div1 * div2); return tmp; @@ -1467,10 +1465,11 @@ static void icl_ddi_clock_get(struct intel_encoder *encoder, if (pll_id == DPLL_ID_ICL_TBTPLL) link_clock = icl_calc_tbt_pll_link(dev_priv, port); else - link_clock = icl_calc_mg_pll_link(dev_priv, port); + link_clock = icl_calc_mg_pll_link(dev_priv, pll_state); } pipe_config->port_clock = link_clock; + ddi_dotclock_get(pipe_config); }