From: Hauke Mehrtens Date: Sun, 23 Sep 2018 17:28:48 +0000 (+0200) Subject: iw: update nl80211.h X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=02e7fa6f8ac11b379b931d9d2089f1be91274afb;p=openwrt%2Fstaging%2Faparcar.git iw: update nl80211.h Now this file matches the version in backports. Signed-off-by: Hauke Mehrtens --- diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch index 2052cb2afa..4fd37579a9 100644 --- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch +++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch @@ -1,39 +1,629 @@ +diff --git a/nl80211.h b/nl80211.h +index c587a61..255a971 100644 --- a/nl80211.h +++ b/nl80211.h -@@ -2153,6 +2153,9 @@ enum nl80211_commands { +@@ -11,6 +11,7 @@ + * Copyright 2008 Jouni Malinen + * Copyright 2008 Colin McCabe + * Copyright 2015-2017 Intel Deutschland GmbH ++ * Copyright (C) 2018 Intel Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above +@@ -203,7 +204,8 @@ + * FILS shared key authentication offload should be able to construct the + * authentication and association frames for FILS shared key authentication and + * eventually do a key derivation as per IEEE 802.11ai. The below additional +- * parameters should be given to driver in %NL80211_CMD_CONNECT. ++ * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in ++ * %NL80211_CMD_UPDATE_CONNECT_PARAMS. + * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai + * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai + * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message +@@ -214,7 +216,8 @@ + * as specified in IETF RFC 6696. + * + * When FILS shared key authentication is completed, driver needs to provide the +- * below additional parameters to userspace. ++ * below additional parameters to userspace, which can be either after setting ++ * up a connection or after roaming. + * %NL80211_ATTR_FILS_KEK - used for key renewal + * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges + * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated +@@ -542,7 +545,8 @@ + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, + * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, +- * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and ++ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, ++ * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and + * %NL80211_ATTR_WIPHY_FREQ_HINT. + * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are + * restrictions on BSS selection, i.e., they effectively prevent roaming +@@ -977,21 +981,58 @@ + * only the %NL80211_ATTR_IE data is used and updated with this command. + * + * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0 +- * for the given authenticator address (specified with &NL80211_ATTR_MAC). +- * When &NL80211_ATTR_PMKR0_NAME is set, &NL80211_ATTR_PMK specifies the ++ * for the given authenticator address (specified with %NL80211_ATTR_MAC). ++ * When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the + * PMK-R0, otherwise it specifies the PMK. + * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously + * configured PMK for the authenticator address identified by +- * &NL80211_ATTR_MAC. ++ * %NL80211_ATTR_MAC. + * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way + * handshake was completed successfully by the driver. The BSSID is +- * specified with &NL80211_ATTR_MAC. Drivers that support 4 way handshake ++ * specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake + * offload should send this event after indicating 802.11 association with +- * &NL80211_CMD_CONNECT or &NL80211_CMD_ROAM. If the 4 way handshake failed +- * &NL80211_CMD_DISCONNECT should be indicated instead. ++ * %NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed ++ * %NL80211_CMD_DISCONNECT should be indicated instead. ++ * ++ * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request ++ * and RX notification. This command is used both as a request to transmit ++ * a control port frame and as a notification that a control port frame ++ * has been received. %NL80211_ATTR_FRAME is used to specify the ++ * frame contents. The frame is the raw EAPoL data, without ethernet or ++ * 802.11 headers. ++ * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, ++ * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added ++ * indicating the protocol type of the received frame; whether the frame ++ * was received unencrypted and the MAC address of the peer respectively. + * + * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded. + * ++ * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host ++ * drivers that do not define separate commands for authentication and ++ * association, but rely on user space for the authentication to happen. ++ * This interface acts both as the event request (driver to user space) ++ * to trigger the authentication and command response (userspace to ++ * driver) to indicate the authentication status. ++ * ++ * User space uses the %NL80211_CMD_CONNECT command to the host driver to ++ * trigger a connection. The host driver selects a BSS and further uses ++ * this interface to offload only the authentication part to the user ++ * space. Authentication frames are passed between the driver and user ++ * space through the %NL80211_CMD_FRAME interface. Host driver proceeds ++ * further with the association after getting successful authentication ++ * status. User space indicates the authentication status through ++ * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH ++ * command interface. ++ * ++ * Host driver reports this status on an authentication failure to the ++ * user space through the connect result as the user space would have ++ * initiated the connection through the connect request. ++ * ++ * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's ++ * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE, ++ * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its ++ * address(specified in %NL80211_ATTR_MAC). ++ * + * @NL80211_CMD_MAX: highest used command number + * @__NL80211_CMD_AFTER_LAST: internal use + */ +@@ -1198,6 +1239,12 @@ enum nl80211_commands { + + NL80211_CMD_RELOAD_REGDB, + ++ NL80211_CMD_EXTERNAL_AUTH, ++ ++ NL80211_CMD_STA_OPMODE_CHANGED, ++ ++ NL80211_CMD_CONTROL_PORT_FRAME, ++ + /* add new commands above here */ + + /* used to define NL80211_CMD_MAX below */ +@@ -1445,6 +1492,15 @@ enum nl80211_commands { + * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with + * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom + * ethertype frames used for key negotiation must not be encrypted. ++ * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control ++ * port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE) ++ * will be sent directly to the network interface or sent via the NL80211 ++ * socket. If this attribute is missing, then legacy behavior of sending ++ * control port frames directly to the network interface is used. If the ++ * flag is included, then control port frames are sent over NL80211 instead ++ * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is ++ * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER ++ * flag. + * + * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. + * We recommend using nested, driver-specific attributes within this. +@@ -1932,6 +1988,12 @@ enum nl80211_commands { + * multicast group. + * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the + * station will deauthenticate when the socket is closed. ++ * If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically ++ * torn down when the socket is closed. ++ * If set during %NL80211_CMD_JOIN_MESH the mesh setup will be ++ * automatically torn down when the socket is closed. ++ * If set during %NL80211_CMD_START_AP the AP will be automatically ++ * disabled when the socket is closed. + * + * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is + * the TDLS link initiator. +@@ -2153,6 +2215,35 @@ enum nl80211_commands { * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT. * @NL80211_ATTR_PORT_AUTHORIZED: (reserved) * ++ * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external ++ * authentication operation (u32 attribute with an ++ * &enum nl80211_external_auth_action value). This is used with the ++ * %NL80211_CMD_EXTERNAL_AUTH request event. ++ * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user ++ * space supports external authentication. This attribute shall be used ++ * only with %NL80211_CMD_CONNECT request. The driver may offload ++ * authentication processing to user space if this capability is indicated ++ * in NL80211_CMD_CONNECT requests from the user space. ++ * ++ * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this ++ * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED. ++ * ++ * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum ++ * nl80211_txq_stats) ++ * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy. ++ * The smaller of this and the memory limit is enforced. ++ * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory memory limit (in bytes) for the ++ * TXQ queues for this phy. The smaller of this and the packet limit is ++ * enforced. ++ * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes ++ * a flow is assigned on each round of the DRR scheduler. ++ * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from ++ * association request when used with NL80211_CMD_NEW_STATION). Can be set ++ * only if %NL80211_STA_FLAG_WME is set. ++ * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use -@@ -2579,6 +2582,8 @@ enum nl80211_attrs { +@@ -2579,6 +2670,23 @@ enum nl80211_attrs { NL80211_ATTR_PMKR0_NAME, NL80211_ATTR_PORT_AUTHORIZED, ++ NL80211_ATTR_EXTERNAL_AUTH_ACTION, ++ NL80211_ATTR_EXTERNAL_AUTH_SUPPORT, ++ ++ NL80211_ATTR_NSS, ++ NL80211_ATTR_ACK_SIGNAL, ++ ++ NL80211_ATTR_CONTROL_PORT_OVER_NL80211, ++ ++ NL80211_ATTR_TXQ_STATS, ++ NL80211_ATTR_TXQ_LIMIT, ++ NL80211_ATTR_TXQ_MEMORY_LIMIT, ++ NL80211_ATTR_TXQ_QUANTUM, ++ ++ NL80211_ATTR_HE_CAPABILITY, ++ + NL80211_ATTR_WIPHY_ANTENNA_GAIN, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -@@ -3862,9 +3867,6 @@ enum nl80211_bss_scan_width { - * @NL80211_BSS_PARENT_BSSID. (u64). - * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF - * is set. -- * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update. -- * Contains a nested array of signal strength attributes (u8, dBm), -- * using the nesting index as the antenna number. - * @__NL80211_BSS_AFTER_LAST: internal - * @NL80211_BSS_MAX: highest BSS attribute +@@ -2618,6 +2726,8 @@ enum nl80211_attrs { + #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS + #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS + ++#define NL80211_WIPHY_NAME_MAXLEN 64 ++ + #define NL80211_MAX_SUPP_RATES 32 + #define NL80211_MAX_SUPP_HT_RATES 77 + #define NL80211_MAX_SUPP_REG_RULES 64 +@@ -2626,7 +2736,8 @@ enum nl80211_attrs { + #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 + #define NL80211_HT_CAPABILITY_LEN 26 + #define NL80211_VHT_CAPABILITY_LEN 12 +- ++#define NL80211_HE_MIN_CAPABILITY_LEN 16 ++#define NL80211_HE_MAX_CAPABILITY_LEN 51 + #define NL80211_MAX_NR_CIPHER_SUITES 5 + #define NL80211_MAX_NR_AKM_SUITES 2 + +@@ -2754,6 +2865,38 @@ struct nl80211_sta_flag_update { + } __attribute__((packed)); + + /** ++ * enum nl80211_he_gi - HE guard interval ++ * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec ++ * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec ++ * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec ++ */ ++enum nl80211_he_gi { ++ NL80211_RATE_INFO_HE_GI_0_8, ++ NL80211_RATE_INFO_HE_GI_1_6, ++ NL80211_RATE_INFO_HE_GI_3_2, ++}; ++ ++/** ++ * enum nl80211_he_ru_alloc - HE RU allocation values ++ * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation ++ * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation ++ * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation ++ * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation ++ * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation ++ * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation ++ * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation ++ */ ++enum nl80211_he_ru_alloc { ++ NL80211_RATE_INFO_HE_RU_ALLOC_26, ++ NL80211_RATE_INFO_HE_RU_ALLOC_52, ++ NL80211_RATE_INFO_HE_RU_ALLOC_106, ++ NL80211_RATE_INFO_HE_RU_ALLOC_242, ++ NL80211_RATE_INFO_HE_RU_ALLOC_484, ++ NL80211_RATE_INFO_HE_RU_ALLOC_996, ++ NL80211_RATE_INFO_HE_RU_ALLOC_2x996, ++}; ++ ++/** + * enum nl80211_rate_info - bitrate information + * + * These attribute types are used with %NL80211_STA_INFO_TXRATE +@@ -2785,6 +2928,13 @@ struct nl80211_sta_flag_update { + * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is + * a legacy rate and will be reported as the actual bitrate, i.e. + * a quarter of the base (20 MHz) rate ++ * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11) ++ * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8) ++ * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier ++ * (u8, see &enum nl80211_he_gi) ++ * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1) ++ * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then ++ * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc) + * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ -@@ -3888,7 +3890,6 @@ enum nl80211_bss { - NL80211_BSS_PAD, - NL80211_BSS_PARENT_TSF, - NL80211_BSS_PARENT_BSSID, -- NL80211_BSS_CHAIN_SIGNAL, + enum nl80211_rate_info { +@@ -2801,6 +2951,11 @@ enum nl80211_rate_info { + NL80211_RATE_INFO_160_MHZ_WIDTH, + NL80211_RATE_INFO_10_MHZ_WIDTH, + NL80211_RATE_INFO_5_MHZ_WIDTH, ++ NL80211_RATE_INFO_HE_MCS, ++ NL80211_RATE_INFO_HE_NSS, ++ NL80211_RATE_INFO_HE_GI, ++ NL80211_RATE_INFO_HE_DCM, ++ NL80211_RATE_INFO_HE_RU_ALLOC, /* keep last */ - __NL80211_BSS_AFTER_LAST, + __NL80211_RATE_INFO_AFTER_LAST, +@@ -2899,6 +3054,9 @@ enum nl80211_sta_bss_param { + * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames + * received from the station (u64, usec) + * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment ++ * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm) ++ * @NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG: avg signal strength of (data) ++ * ACK frame (s8, dBm) + * @__NL80211_STA_INFO_AFTER_LAST: internal + * @NL80211_STA_INFO_MAX: highest possible station info attribute + */ +@@ -2937,6 +3095,8 @@ enum nl80211_sta_info { + NL80211_STA_INFO_TID_STATS, + NL80211_STA_INFO_RX_DURATION, + NL80211_STA_INFO_PAD, ++ NL80211_STA_INFO_ACK_SIGNAL, ++ NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG, + + /* keep last */ + __NL80211_STA_INFO_AFTER_LAST, +@@ -2954,6 +3114,7 @@ enum nl80211_sta_info { + * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted + * MSDUs (u64) + * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment ++ * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute) + * @NUM_NL80211_TID_STATS: number of attributes here + * @NL80211_TID_STATS_MAX: highest numbered attribute here + */ +@@ -2964,6 +3125,7 @@ enum nl80211_tid_stats { + NL80211_TID_STATS_TX_MSDU_RETRIES, + NL80211_TID_STATS_TX_MSDU_FAILED, + NL80211_TID_STATS_PAD, ++ NL80211_TID_STATS_TXQ_STATS, + + /* keep last */ + NUM_NL80211_TID_STATS, +@@ -2971,6 +3133,44 @@ enum nl80211_tid_stats { + }; + + /** ++ * enum nl80211_txq_stats - per TXQ statistics attributes ++ * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved ++ * @NUM_NL80211_TXQ_STATS: number of attributes here ++ * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged ++ * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently ++ * backlogged ++ * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen ++ * @NL80211_TXQ_STATS_DROPS: total number of packet drops ++ * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks ++ * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow ++ * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow ++ * (only for per-phy stats) ++ * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions ++ * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ ++ * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ ++ * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY ++ * @NL80211_TXQ_STATS_MAX: highest numbered attribute here ++ */ ++enum nl80211_txq_stats { ++ __NL80211_TXQ_STATS_INVALID, ++ NL80211_TXQ_STATS_BACKLOG_BYTES, ++ NL80211_TXQ_STATS_BACKLOG_PACKETS, ++ NL80211_TXQ_STATS_FLOWS, ++ NL80211_TXQ_STATS_DROPS, ++ NL80211_TXQ_STATS_ECN_MARKS, ++ NL80211_TXQ_STATS_OVERLIMIT, ++ NL80211_TXQ_STATS_OVERMEMORY, ++ NL80211_TXQ_STATS_COLLISIONS, ++ NL80211_TXQ_STATS_TX_BYTES, ++ NL80211_TXQ_STATS_TX_PACKETS, ++ NL80211_TXQ_STATS_MAX_FLOWS, ++ ++ /* keep last */ ++ NUM_NL80211_TXQ_STATS, ++ NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1 ++}; ++ ++/** + * enum nl80211_mpath_flags - nl80211 mesh path flags + * + * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active +@@ -3022,6 +3222,38 @@ enum nl80211_mpath_info { + }; + + /** ++ * enum nl80211_band_iftype_attr - Interface type data attributes ++ * ++ * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved ++ * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute ++ * for each interface type that supports the band data ++ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE ++ * capabilities IE ++ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE ++ * capabilities IE ++ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE ++ * capabilities IE ++ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as ++ * defined in HE capabilities IE ++ * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently ++ * defined ++ * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use ++ */ ++enum nl80211_band_iftype_attr { ++ __NL80211_BAND_IFTYPE_ATTR_INVALID, ++ ++ NL80211_BAND_IFTYPE_ATTR_IFTYPES, ++ NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC, ++ NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY, ++ NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, ++ NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, ++ ++ /* keep last */ ++ __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, ++ NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1 ++}; ++ ++/** + * enum nl80211_band_attr - band attributes + * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, +@@ -3036,6 +3268,8 @@ enum nl80211_mpath_info { + * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as + * defined in 802.11ac + * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE ++ * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using ++ * attributes from &enum nl80211_band_iftype_attr + * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined + * @__NL80211_BAND_ATTR_AFTER_LAST: internal use + */ +@@ -3051,6 +3285,7 @@ enum nl80211_band_attr { + + NL80211_BAND_ATTR_VHT_MCS_SET, + NL80211_BAND_ATTR_VHT_CAPA, ++ NL80211_BAND_ATTR_IFTYPE_DATA, + + /* keep last */ + __NL80211_BAND_ATTR_AFTER_LAST, +@@ -3060,6 +3295,29 @@ enum nl80211_band_attr { + #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA + + /** ++ * enum nl80211_wmm_rule - regulatory wmm rule ++ * ++ * @__NL80211_WMMR_INVALID: attribute number 0 is reserved ++ * @NL80211_WMMR_CW_MIN: Minimum contention window slot. ++ * @NL80211_WMMR_CW_MAX: Maximum contention window slot. ++ * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space. ++ * @NL80211_WMMR_TXOP: Maximum allowed tx operation time. ++ * @nl80211_WMMR_MAX: highest possible wmm rule. ++ * @__NL80211_WMMR_LAST: Internal use. ++ */ ++enum nl80211_wmm_rule { ++ __NL80211_WMMR_INVALID, ++ NL80211_WMMR_CW_MIN, ++ NL80211_WMMR_CW_MAX, ++ NL80211_WMMR_AIFSN, ++ NL80211_WMMR_TXOP, ++ ++ /* keep last */ ++ __NL80211_WMMR_LAST, ++ NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1 ++}; ++ ++/** + * enum nl80211_frequency_attr - frequency attributes + * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz +@@ -3108,6 +3366,9 @@ enum nl80211_band_attr { + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed + * on this channel in current regulatory domain. ++ * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations. ++ * This is a nested attribute that contains the wmm limitation per AC. ++ * (see &enum nl80211_wmm_rule) + * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number + * currently defined + * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use +@@ -3136,6 +3397,7 @@ enum nl80211_frequency_attr { + NL80211_FREQUENCY_ATTR_IR_CONCURRENT, + NL80211_FREQUENCY_ATTR_NO_20MHZ, + NL80211_FREQUENCY_ATTR_NO_10MHZ, ++ NL80211_FREQUENCY_ATTR_WMM, + + /* keep last */ + __NL80211_FREQUENCY_ATTR_AFTER_LAST, +@@ -3319,7 +3581,7 @@ enum nl80211_sched_scan_match_attr { + * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated + * base on contiguous rules and wider channels will be allowed to cross + * multiple contiguous/overlapping frequency ranges. +- * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT ++ * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT + * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation + * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation + * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed +@@ -4945,6 +5207,27 @@ enum nl80211_feature_flags { + * probe request tx deferral and suppression + * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL + * value in %NL80211_ATTR_USE_MFP. ++ * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan. ++ * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan. ++ * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan. ++ * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions. ++ * Device or driver will do all DFS-related actions by itself, ++ * informing user-space about CAC progress, radar detection event, ++ * channel change triggered by radar detection event. ++ * No need to start CAC from user-space, no need to react to ++ * "radar detected" event. ++ * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and ++ * receiving control port frames over nl80211 instead of the netdevice. ++ * @NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT: This Driver support data ack ++ * rssi if firmware support, this flag is to intimate about ack rssi ++ * support to nl80211. ++ * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate ++ * TXQs. ++ * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the ++ * SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN. ++ * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data ++ * except for supported rates from the probe request content if requested ++ * by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag. + * + * @NUM_NL80211_EXT_FEATURES: number of extended features. + * @MAX_NL80211_EXT_FEATURES: highest extended feature index. +@@ -4972,6 +5255,15 @@ enum nl80211_ext_feature_index { + NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE, + NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION, + NL80211_EXT_FEATURE_MFP_OPTIONAL, ++ NL80211_EXT_FEATURE_LOW_SPAN_SCAN, ++ NL80211_EXT_FEATURE_LOW_POWER_SCAN, ++ NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN, ++ NL80211_EXT_FEATURE_DFS_OFFLOAD, ++ NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211, ++ NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT, ++ NL80211_EXT_FEATURE_TXQS, ++ NL80211_EXT_FEATURE_SCAN_RANDOM_SN, ++ NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT, + + /* add new features before the definition below */ + NUM_NL80211_EXT_FEATURES, +@@ -5032,6 +5324,10 @@ enum nl80211_timeout_reason { + * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN + * requests. + * ++ * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and ++ * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only ++ * one of them can be used in the request. ++ * + * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority + * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning + * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured +@@ -5059,7 +5355,26 @@ enum nl80211_timeout_reason { + * and suppression (if it has received a broadcast Probe Response frame, + * Beacon frame or FILS Discovery frame from an AP that the STA considers + * a suitable candidate for (re-)association - suitable in terms of +- * SSID and/or RSSI ++ * SSID and/or RSSI. ++ * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to ++ * accomplish the scan. Thus, this flag intends the driver to perform the ++ * scan request with lesser span/duration. It is specific to the driver ++ * implementations on how this is accomplished. Scan accuracy may get ++ * impacted with this flag. ++ * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume ++ * optimal possible power. Drivers can resort to their specific means to ++ * optimize the power. Scan accuracy may get impacted with this flag. ++ * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan ++ * results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum ++ * possible scan results. This flag hints the driver to use the best ++ * possible scan configuration to improve the accuracy in scanning. ++ * Latency and power use may get impacted with this flag. ++ * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe ++ * request frames from this scan to avoid correlation/tracking being ++ * possible. ++ * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to ++ * only have supported rates and no additional capabilities (unless ++ * added by userspace explicitly.) + */ + enum nl80211_scan_flags { + NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, +@@ -5070,6 +5385,11 @@ enum nl80211_scan_flags { + NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP = 1<<5, + NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE = 1<<6, + NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION = 1<<7, ++ NL80211_SCAN_FLAG_LOW_SPAN = 1<<8, ++ NL80211_SCAN_FLAG_LOW_POWER = 1<<9, ++ NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, ++ NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, ++ NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, + }; + + /** +@@ -5127,6 +5447,8 @@ enum nl80211_smps_mode { + * non-operating channel is expired and no longer valid. New CAC must + * be done on this channel before starting the operation. This is not + * applicable for ETSI dfs domain where pre-CAC is valid for ever. ++ * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started, ++ * should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled. + */ + enum nl80211_radar_event { + NL80211_RADAR_DETECTED, +@@ -5134,6 +5456,7 @@ enum nl80211_radar_event { + NL80211_RADAR_CAC_ABORTED, + NL80211_RADAR_NOP_FINISHED, + NL80211_RADAR_PRE_CAC_EXPIRED, ++ NL80211_RADAR_CAC_STARTED, + }; + + /** +@@ -5425,11 +5748,11 @@ enum nl80211_nan_func_attributes { + * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set. + * This is a flag. + * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if +- * &NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. ++ * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. + * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if +- * &NL80211_NAN_SRF_BF is present. This is a u8. ++ * %NL80211_NAN_SRF_BF is present. This is a u8. + * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if +- * and only if &NL80211_NAN_SRF_BF isn't present. This is a nested ++ * and only if %NL80211_NAN_SRF_BF isn't present. This is a nested + * attribute. Each nested attribute is a MAC address. + * @NUM_NL80211_NAN_SRF_ATTR: internal + * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute +@@ -5469,4 +5792,15 @@ enum nl80211_nan_match_attributes { + NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1 + }; + ++/** ++ * nl80211_external_auth_action - Action to perform with external ++ * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. ++ * @NL80211_EXTERNAL_AUTH_START: Start the authentication. ++ * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication. ++ */ ++enum nl80211_external_auth_action { ++ NL80211_EXTERNAL_AUTH_START, ++ NL80211_EXTERNAL_AUTH_ABORT, ++}; ++ + #endif /* __LINUX_NL80211_H */