From: Stijn Segers Date: Fri, 8 Jan 2021 13:32:47 +0000 (+0100) Subject: realtek: introduce shared DTSI for GS1900 series X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=0542cb6a2b54b7694d7c668f5d6a200cfcc311e3;p=openwrt%2Fstaging%2Fzorun.git realtek: introduce shared DTSI for GS1900 series The ZyXEL GS1900-8HP v1, v2 and GS1900-10HP are all built on a similar Realtek RTL8380M platform. Create a common DTSI in preparation for GS1900-8HP support, and switch to the macros defined in rtl838x.dtsi. Signed-off-by: Stijn Segers [drop redundant includes, use &mdio directly, do not replace SFP ports] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts index b114cb6b5a..92d0e25fc4 100644 --- a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts +++ b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts @@ -1,60 +1,11 @@ // SPDX-License-Identifier: GPL-2.0-or-later -#include "rtl838x.dtsi" - -#include -#include +#include "rtl8380_zyxel_gs1900.dtsi" / { compatible = "zyxel,gs1900-10hp", "realtek,rtl838x-soc"; model = "ZyXEL GS1900-10HP Switch"; - aliases { - led-boot = &led_sys; - led-failsafe = &led_sys; - led-running = &led_sys; - led-upgrade = &led_sys; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - gpio1: rtl8231-gpio { - status = "okay"; - - poe_enable { - gpio-hog; - gpios = <13 0>; - output-high; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_sys: sys { - label = "gs1900:green:sys"; - gpios = <&gpio0 47 GPIO_ACTIVE_HIGH>; - }; - }; - /* i2c of the left SFP cage: port 9 */ i2c0: i2c-gpio-0 { compatible = "i2c-gpio"; @@ -92,161 +43,15 @@ mod-def0-gpio = <&gpio1 32 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; }; - -}; - -&spi0 { - status = "okay"; - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "u-boot-env"; - reg = <0x40000 0x10000>; - read-only; - }; - partition@50000 { - label = "u-boot-env2"; - reg = <0x50000 0x10000>; - read-only; - }; - partition@60000 { - label = "jffs"; - reg = <0x60000 0x100000>; - }; - partition@160000 { - label = "jffs2"; - reg = <0x160000 0x100000>; - }; - partition@b260000 { - label = "firmware"; - reg = <0x260000 0x6d0000>; - compatible = "denx,uimage"; - }; - partition@930000 { - label = "runtime2"; - reg = <0x930000 0x6d0000>; - }; - }; - }; }; -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - /* Internal phy */ - phy8: ethernet-phy@8 { - reg = <8>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - phy9: ethernet-phy@9 { - reg = <9>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - phy10: ethernet-phy@10 { - reg = <10>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <11>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - phy12: ethernet-phy@12 { - reg = <12>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <13>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - phy14: ethernet-phy@14 { - reg = <14>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - phy15: ethernet-phy@15 { - reg = <15>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - phy24: ethernet-phy@24 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <24>; - }; - phy26: ethernet-phy@26 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <26>; - }; - }; +&mdio { + INTERNAL_PHY(24) + INTERNAL_PHY(26) }; &switch0 { ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <8>; - label = "lan1"; - phy-handle = <&phy8>; - phy-mode = "internal"; - }; - port@1 { - reg = <9>; - label = "lan2"; - phy-handle = <&phy9>; - phy-mode = "internal"; - }; - port@2 { - reg = <10>; - label = "lan3"; - phy-handle = <&phy10>; - phy-mode = "internal"; - }; - port@3 { - reg = <11>; - label = "lan4"; - phy-handle = <&phy11>; - phy-mode = "internal"; - }; - port@4 { - reg = <12>; - label = "lan5"; - phy-handle = <&phy12>; - phy-mode = "internal"; - }; - port@5 { - reg = <13>; - label = "lan6"; - phy-handle = <&phy13>; - phy-mode = "internal"; - }; - port@6 { - reg = <14>; - label = "lan7"; - phy-handle = <&phy14>; - phy-mode = "internal"; - }; - port@7 { - reg = <15>; - label = "lan8"; - phy-handle = <&phy15>; - phy-mode = "internal"; - }; port@24 { reg = <24>; label = "lan9"; @@ -260,6 +65,7 @@ pause; }; }; + port@26 { reg = <26>; label = "lan10"; @@ -273,14 +79,5 @@ pause; }; }; - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; }; }; diff --git a/target/linux/realtek/dts/rtl8380_zyxel_gs1900.dtsi b/target/linux/realtek/dts/rtl8380_zyxel_gs1900.dtsi new file mode 100644 index 0000000000..c3e16c001a --- /dev/null +++ b/target/linux/realtek/dts/rtl8380_zyxel_gs1900.dtsi @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl838x.dtsi" + +#include +#include + +/ { + aliases { + led-boot = &led_sys; + led-failsafe = &led_sys; + led-running = &led_sys; + led-upgrade = &led_sys; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + gpio1: rtl8231-gpio { + status = "okay"; + + poe_enable { + gpio-hog; + gpios = <13 0>; + output-high; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_sys: sys { + label = "gs1900:green:sys"; + gpios = <&gpio0 47 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "u-boot-env2"; + reg = <0x50000 0x10000>; + read-only; + }; + partition@60000 { + label = "jffs"; + reg = <0x60000 0x100000>; + }; + partition@160000 { + label = "jffs2"; + reg = <0x160000 0x100000>; + }; + partition@b260000 { + label = "firmware"; + reg = <0x260000 0x6d0000>; + compatible = "denx,uimage"; + }; + partition@930000 { + label = "runtime2"; + reg = <0x930000 0x6d0000>; + }; + }; + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +};