From: David Bauer <mail@david-bauer.net>
Date: Tue, 15 Sep 2020 09:19:14 +0000 (+0200)
Subject: ipq40xx: enable FRITZRepeater 3000 ports on switch
X-Git-Url: http://git.cdn.openwrt.org/?a=commitdiff_plain;h=056945faa4dd611298979767978f4bb2a52cabc0;p=openwrt%2Fstaging%2Fneocturne.git

ipq40xx: enable FRITZRepeater 3000 ports on switch

The ethernet ports on the AVM FRITZRepeater 3000 are not separated
between LAN and WAN in the stock firmware. OpenWrt currently abstracts
port 4 as eth0 and port 5 as eth1, bridging them in the kernel.

This patch adjusts the GMAC port bitmasks and default bitmask for ar40xx
to bridge them on the switch, avoiding traffic on both ports to pass
thru the CPU.

Signed-off-by: David Bauer <mail@david-bauer.net>
---

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 5c1bdc51ce..2966fbf1fb 100755
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -61,7 +61,10 @@ ipq40xx_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
-	avm,fritzrepeater-3000|\
+	avm,fritzrepeater-3000)
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "4:lan:1" "5:lan:2"
+		;;
 	compex,wpj419|\
 	compex,wpj428|\
 	engenius,eap2200)
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts
index 6914917eb3..6a132adade 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts
@@ -58,12 +58,13 @@
 		ess-switch@c000000 {
 			status = "okay";
 
-			switch_lan_bmp = <0x10>;
-			switch_wan_bmp = <0x20>;
+			switch_lan_bmp = <0x30>;
+			switch_wan_bmp = <0x02>;
 		};
 
 		edma@c080000 {
 			status = "okay";
+			qcom,num_gmac = <1>;
 		};
 	};
 
@@ -209,6 +210,10 @@
 	};
 };
 
+&gmac0 {
+	vlan_tag = <1 0x30>;
+};
+
 &cryptobam {
 	status = "okay";
 };